Flashcards
chapter 15 spectroscopy
Cards in this deck (55)
- 1NMR provides info on (3)composition, Tacticity(conformation), solution and solid state dynamics
- 2ESR(Electron spin resonance) provides info onDegradation, fracture, dynamics of probes.
- 3Microwaves provide info onstructure, moments of inertia
- 4IR provides info oncomposition, orientation
- 5UV-Vizs provides info oncomposition, orientation, quantative determination of additives
- 6x-ray provides info onelemental analysis, surface compostion
- 7Radiant heat energy, infared is of a frequency which corresponds tomolecular vibrations
- 8There are three modes of molecular vibrations:Stretching, in plane bending, and out of plane bending
- 9Stretching vibration can either beSymmetrical or asymmetrical
- 10types of bending vibrationsTwisting rocking wagging scissoring
- 11Intensity correspondsto a change in dipole moment to be detective
- 12In order for a vibrational motion to absorb infrared light, it mustresult in a change in the dipole moment of martial
- 13And I are spectroscopy only ____ bonds absorb lightpolar
- 14planks constant6.626x10^-34 J s
- 15velocity of lightc=2.998x10^8 m/s
- 16Absorption of ultraviolet and visible (UV-vis) radiation results from electronic transitions of bonding electrons, most commonly fromhighest occupied bonding or non-bonding molecular orbital (HOMO) to the lowest unoccupied molecular orbital (LUMO)
- 17The groups which give rise to the absorptions that contain π-bonds are calledchromophores.
- 18triadsequence of three monomer units
- 19attenuated total reflectance ATRlight penetrates through the surface of a crystal and a signal is generate by the reflectance of the light. Polymers contain additives which hinder the transmission of light
- 20Number average degree of polymerizationDPn= (# of repeat unit)/(#number of end group x # of end groups (1 or 2 or branched))
- 21conversion %=(integral of polymer signal)/(integral of polymer + monomer signal)
- 22relative moles =(integral of proton)/ (number of proton)
- 23number average molecular weight(DPn x Molar mass of repeat unit) + molar mass of end group
- 24limitations of NMR1. molecular weight
2. chain end functionality - 25enatiomersnon superimposable mirror images
- 26meso isomerinternal symmetry within a molecule, structures and superimposable and more complex
- 27Absorption results fromcoupling of a vibration with the oscillating electric field of the IR radiation
- 28The basis of IR spectroscopy is that for a particular type of bond deformation ΔE, and hence v,depend upon the atoms involved
- 29by measuring the absorption of IR radiation over a range of v a spectrum is obtained which contains a series of absorptions at different v. Each absorption corresponds to a specific type of deformation of a particular bond (or sequence of bonds) and is characteristic of that bond deformation with v not greatly affected by the other atoms present in the molecule.Thus the absorption due to a particular bond deformation occurs at approximately the same v for all molecules (including polymers) which contain that bond.
- 30wavenumber is the reciprocal ofwavelength
v = 1/l
is related to its frequency by f = vc - 313 regions of Ir spectrum1. the 3500–1300 cm−1 (functional group) region
2. in the 1300–1000 cm−1 region (finger print region
3. the 1000–650 cm−1 (olefinic/aromatic) region - 32In the 3500–1300 cm−1 (functional group) region, absorptions can easily be assigned to particular bond deformations on the basis oftheir position, strength and nature (e.g. O−H stretching gives a very strong, broad absorption centred around 3300 cm−1 whereas N−H stretching, which appears in the same wavenumber range, gives a much weaker and sharper absorption that if present in a primary amine group (−NH2) appears as a doublet due to symmetric and asymmetric simultaneous deformation of the two N−H bonds)
- 33Absorptions in the 1300–1000 cm−1 region, ‘fingerprint’ regionarise from C−O stretching and more complex skeletal C−C stretching vibrations, often of several bonds together, and are difficult to assign with any certainty; hence, the number, position and strength of the absorptions in this region tend to be unique to a particular material
- 34the 1000–650 cm−1 (olefinic/aromatic) region shows absorption patterns that are characteristic of specific types ofsubstituted C=C groups (vinyl, cis- or trans-) or benzene rings (mono-substituted or ortho-, meta- or para-disubstituted) and are due to C−H bending vibrations which are out of the plane defined by the sp2-hybridized carbon atoms.
- 35The simplest application of IR spectroscopy is forpolymer identification
- 36IR spectroscopy also finds application in the characterization ofbranched polymers and
copolymers. - 37The degree of branching in a branched polymer can be determined provided thatcharacteristic absorptions due to the branches can be identified
- 38Average compositions of copolymers can be determined if the different repeat unitsgive characteristic IR absorptions which are not coincident.
- 39IR spectra can provide information ontacticity
- 40There are two general types of instrument for recording IR spectra,namely double-beam and Fourier transform (FT) IR spectrometers. most modern IR are FTIR
- 41FTIR microscopy is a special type of IR spectroscopy in which samples are imaged byrecording IR absorptions in focused regions of a sample, typically a few microns in size.
- 42a set of non superimposable isomers is calledracemic
- 43the meso and racemic forms are stereochemical isomers which are not mirror images are calleddiastereomers
- 44dyada sequence of two monomer units in a chain
- 45'm' dyadis isotactic, when two adjacent chiral centers are in the same conformation
- 46'r' dyadis syndiotactic, when two adjacent chiral centers are in different conformations
- 47triada sequence of three repeat units
- 48atactic polymer (in terms of probabilities)dyad: m=r=.5
Triad: mm=rr=.25
mr=.50 - 49isotactic polymerdyad and triad: m=mm=1
all the same conformation - 50syndiotactictriat and dyad: r=rr=1
alternating conformation - 51when observing tactcity in NMR, if all hydrogens are in the same chemical environmentthe polymer is syndiotactic
- 52isotactic and atactic hydrogens in a repeat unit willbe in different chemical enviroments
- 53which stack better isotactic or syndiotacticsyndiotactic stack better because their alternating conformation lets them stack without steric hindrance
- 54NMR spectra of polymers of low molar mass often show unique absorptions due tothe end groups.
- 55Tg increases withsyndiotactic groups
Information
- Description
- polymer chem Flashcards on chapter 15 spectroscopy, created by Ashlin Deatherage on 12/11/2022.
- Created by
- Ashlin Deatherage
- Views
- 3
- Rating
More on Spectroscopic Structure Determination