GoConqr has a new look! Let us know what you think.

Flashcards

LNs Weeks 9 and 10

R S C ICMP Year 4 English 36 cards

Chapter 17 key points

Cards in this deck (36)

  1. 1Chapter 17 key pointsChapter 17 key points
  2. 2Chapter 18 Key pointsChapter 18 Key points
  3. 3Describe the effective mass in terms of the free electron energy dispersion and band curvatureIn the free-electron energy dispersion πœ–(π‘˜), the factor ℏ^2/2π‘š gives the curvature
    of the band. (Curvature is used here in the standard mathematical sense; for a
    function, it is given by its second derivative.)
    Starting from the equation of motion in terms of the wave vector π‘˜ and the
    definition of the group velocity, we see that the force 𝐹 acting on an electron (wave packet) is related to the acceleration d𝑣𝑔/d𝑑. The prefactor takes the role
    of an effective mass for the electron wave packet. As expected from the initial
    curvature argument, the effective mass π‘šβˆ—is indeed proportional to the reciprocal
    of the band curvature. The curvature of a band generally changes as a function of wave vector along the
    band. Consequently, the effective mass also depends on the wave vector and on
    the band in which the state is located.
    Describe the effective mass in terms of the free electron energy dispersion and band curvature
  4. 4For the BZ boundary sketch the effective mass as a function of k and energy, describe the diagramAt the zone centre, we have essentially free-electron like behaviour (π‘šβˆ— β‰ˆ
    constant), but the effective mass depends on the band width (energy range covered
    by the band). A smaller bandwidth gives a larger effective mass.
    At the zone boundary, the effective mass is negative. This represents the effect of
    the crystal potential and Bragg reflection, whereby a crystal electron is accelerated
    in the direction opposite to that expected for a free electron. For example, with an
    electric field pointing to the left, a force pointing to the right acts on every electron
    and increases its wave vector (i.e., shifts it to the right. Do you remember the
    shifted-Fermi-sphere picture from the free-electron gas?) If such an accelerating
    electron approaches the right Brillouin zone boundary at π‘˜ = πœ‹/π‘Ž, its velocity
    decreases even though the wave vector increases, as discussed above, and this is
    expressed by the negative effective mass.
    For the BZ boundary sketch the effective mass as a function of k and energy, describe the diagram
  5. 5Describe the electron bands of heavy fermion systemsThe heavy-fermion systems mentioned earlier have 𝑓 -electron bands with a very
    small bandwidths, which correspond to very large effective masses, as observed in
    heat capacity experiments.
  6. 6When does the effective mass become the same as the free electron massOnly in the limit of the free and independent electron
    Fermi gas
  7. 7What does the effective mass tensor describeanisotropy of the effective mass
  8. 8Describe the bands of Silicon in the diagram What type band gap does it have and whySilicon has the diamond crystal structure and therefore a face-centred cubic lattice
    (but not the fcc structure!). The electron energy bands are shown along lines of
    high symmetry in the Brillouin zone for the fcc lattice. The bands around the
    Fermi energy (set to zero here) are derived from the 3𝑠
    2
    3𝑝
    2 valence electrons of the
    free Si atom. The four bands below the gap correspond to the bonding molecular
    orbitals, and the vacant bands above the gap to the anti-bonding orbitals. The
    lowest band is nearly parabolic around the minimum at the Ξ“ point (π‘˜ = 0) β€”
    free-electron-like.
    The top of the valence band is also located at the Ξ“ point, whereas the minimum
    of the conduction band is near the X point in the Brillouin zone. This means that
    silicon has an indirect band gap β€” it is an indirect semiconductor. The band gap is
    about 1.1 eV and changes slightly with temperature. The band gap is much larger
    than π‘˜π΅π‘‡ β‰ˆ 25 meV at room temperature.
    Describe the bands of Silicon in the diagram What type band gap does it have and why
  9. 9Discuss why Germanium has a similar band structure to silicon and what that means in terms of consequences, also state some differencesThe band structure of germanium is similar to that of silicon, which reflects the
    fact they have the same crystal structure, strong covalent binding and closely
    related valence configurations. The band gap in germanium is somewhat smaller,
    and the conduction band minimum is now at the L point. Like silicon, germanium
    is an indirect semiconductor. A notable difference is that the topmost valence band
    along Ξ“-L is split into two, and that the maximum of the next valence band at Ξ“ is
    shifted to lower energy. This arises from a modification of the energy level due to
    spin–orbit coupling, where the coupling between the orbital angular momentum
    and the electron spin lifts energy-level degeneracies. It is a relativistic effect
    and becomes more pronounced for the heavier elements
  10. 10Sketch the band structure of a semiconductor showing; electrons, heavy holes, light holes, split off holes, Eg band gap, delta spin orbit splitting, type of bands, axii Why is the splitting of the topmost valence band importantimportant for applications because it modifies the effective massesSketch the band structure of a semiconductor showing; electrons, heavy holes, light holes, split off holes, Eg band gap, delta spin orbit...
  11. 11What is a difference between the semiconductor GaAs and Si, Gethe band structure of GaAs is similar to those of Si and Ge, but
    with more pronounced band splittings
  12. 12Briefly define intrinsic semiconductorperfect semiconductors
    without structural defects or chemical impurities
  13. 13What carries the electrical current in intrinsic semiconductors How does an intrinsic semiconductor behave like a perfect insulatorcarried by free charge carriers: electrons in the conduction band(s)
    and/or holes in the valence band(s). The excitation of an electron from an occupied state in the valence band to a vacant state in the conduction band creates
    two free carriers: a free electron and a free hole. The electrons are usually excited
    thermally, but an excitation by the absorption of electromagnetic radiation is another possibility. At 0 K and without irradiation, such an intrinsic semiconductor
    has zero conductivity β€” it behaves like a perfect insulator.
  14. 14State the relations for electrical conductivity and charge carrier mobilityThe electrical conductivity 𝜎 can then be expressed in terms of the electron and
    hole concentrations 𝑛 and 𝑝, respectively, as well the electron and hole mobilities
    πœ‡π‘› and πœ‡π‘. The charge carrier mobility πœ‡ relates the carrier drift velocity 𝑣𝑑 to the
    applied electric field: 𝑣𝑑 = πœ‡πΈ. In the context of the free-electron Fermi gas model discussed before, the mobility is given by πœ‡ = π‘’πœ/π‘šβˆ—
    , where 𝜏 is the average time
    between scattering events.
    State the relations for electrical conductivity and charge carrier mobility
  15. 15State the DOS for no of electrons and density of electrons integralsA density of states
    that yields the number of states or electrons when integrated.
    2, A density of states that yields a volumetric concentration of
    electrons (or holes) when integrated
    State the DOS for no of electrons and density of electrons integrals
  16. 16How is the concentration of free electrons in thermal equilibrium determined and describe the terms it contains?For the conduction
    band density of states, 𝐷𝑐(πœ–), we use an expression equivalent to that of the
    free-electron gas (with a parabolic band dispersion). We only need to substitute
    πœ– β†’ πœ– βˆ’ πœ–π‘ because the band minimum is at πœ–π‘
    , not zero. We will see in the next
    lecture that the chemical potential πœ–πΉ (or Fermi level, as it is more commonly called
    in semiconductor physics) in the Fermi-Dirac distribution function 𝑓 (πœ–, 𝑇 ) for an
    intrinsic semiconductor is very close to the centre of the band gap. As the band gap 𝐸𝑔 = πœ–π‘ βˆ’ πœ–π‘£
    is on the order of 1 eV, it is much larger than π‘˜π΅π‘‡ at β€œnormal”
    temperatures, which allows us to approximate the Fermi-Dirac distribution with
    a simpler, purely exponential form by dropping the +1 in the denominator. The
    resulting integral can be solved after variable substitution.
    the electron effective mass appears here because we used it as a
    parameter to describe the conduction band curvature and density of states.
  17. 17Write the full derivation of the concentration of free electrons in thermal equilibriumWrite the full derivation of the concentration of free electrons in thermal equilibrium
  18. 18Describe the intrinsic charge carrier densities and the terms that appear in itIn an intrinsic semiconductor, every free electron in the conduction band has been
    excited from the valence band and has left behind a hole. The concentration of free
    electrons must therefore equal that of the free holes. This allows us to eliminate
    the Fermi level πœ–πΉ , which we have not yet determined. The important result is here
    that the intrinsic electron and hole concentrations (𝑛𝑖 = 𝑝𝑖
    ) depend exponentially
    on the band gap and temperature, ∝ 𝑒
    βˆ’πΈπ‘”/2π‘˜π΅π‘‡
    . The additional 𝑇^3/2 factor is only a
    small correction. The electron and hole mobilities are also temperature dependent,
    which contributes to the temperature dependence of the conductivity, but the
    dominant factor are the exponential temperature dependencies of the carrier
    concentrations.
    Describe the intrinsic charge carrier densities and the terms that appear in it
  19. 19Describe the intrinsic carrier concentrations of typical semiconductorsThe intrinsic carrier concentrations of typical semiconductors scale mostly with
    the size of the band gap, and they are many orders of magnitude lower than in
    typical metals
  20. 20State the relation for the free carrier concentrationsState the relation for the free carrier concentrations
  21. 21State a limitation for the model of temperature dependence of the intrinsic carrier concentrationexplains experimental data very well. However, the model depends on the
    choice of the electron and hole effective masses that are used to approximate the
    valence and conduction band density of states.
  22. 22Describe briefly how to determine the Fermi levelan intrinsic,
    neutral semiconductor must remain charge neural at all temperatures and irrespective of how many electrons are excited from the valence to the conduction
    band, leaving behind the same number of positive holes. We can then determine the Fermi level from the fact that level and its variation with temperature
    from the valence and conduction band densities of states, taking into account the
    thermal population of the hole and electron states, and requiring charge neutrality,
    𝑛𝑖(𝑇 ) = 𝑝𝑖(𝑇 )
  23. 23Describe the areas beneath the dn/de and dp/de curvesThe density of occupied conduction band states is given by d𝑛/dπœ– = 𝐷𝑐(πœ–) Γ—
    𝑓 (πœ–, πœ–πΉ , 𝑇 ), where 𝐷𝑐
    is the density of states of the conduction band 𝑓 is the FermiDirac distribution function. For the valence band holes, we need to consider the
    missing electrons, so that 𝑓 (πœ–, πœ–πΉ , 𝑇 ) β†’ 1 βˆ’ 𝑓 (πœ–, πœ–πΉ , 𝑇 ). The electron and hole
    concentrations (𝑛 and 𝑝) are then obtained by integrating these occupied densities
    of states over the relevant conduction and valence band energy ranges. In other
    words, the electron and hole concentrations are given by the areas under the
    d𝑛/dπœ– and d𝑝/dπœ– curves.
    Describe the areas beneath the dn/de and dp/de curves
  24. 24What increases dn/de and lowers dp/deThe left panel in the slide above illustrates the situation where the hole effective
    mass is larger than the electron effective mass
    (π‘šπ‘* = 2π‘šn*), and the Fermi level
    was set to the centre of the band gap. The result of this hypothetical scenario is
    that the hole concentration 𝑝 would be larger than the electron concentration 𝑛,
    which is not possible in a neutral, intrinsic crystal. The Fermi level changes so as
    to maintain charge neutrality at all temperatures. In this case, πœ–πΉ will increase,
    shifting the Fermi-Dirac distribution to higher energies. This in turn increases
    d𝑛/dπœ– and hence the electron concentration 𝑛, while it lowers d𝑝/dπœ– and the hole
    concentration 𝑝
  25. 25Describe the temperature dependence of the fermi level in an intrinsic semiconductor State the relation for the fermi levelAt zero temperature, the Fermi level in an intrinsic semiconductor is always at
    the centre of the band gap,
    πœ–πΉ (0) = 1/2(πœ–π‘ + πœ–π‘£). The Fermi level then shifts up or
    down linearly with temperature, where the sign depends on the ratio of the hole
    and electron effective masses
    Describe the temperature dependence of the fermi level in an intrinsic semiconductor State the relation for the fermi level
  26. 26What happens if the valence and conduction band densities of states are symmetric (π‘šπ‘›* = π‘šπ‘*) and the Fermi level πœ–πΉ is in the middle of the band gap Or if the valence and conduction band densities of states are differentIf the valence and conduction band densities of states are symmetric (π‘šπ‘›* = π‘šπ‘*)
    and the Fermi level πœ–πΉ is in the middle of the band gap, then the free electron
    and free holes densities of states are the same, and so are the respective electron
    and hole concentrations (left panel above). If the valence and conduction band
    densities of states are different (right panel), then the Fermi level will start at the
    middle of the band gap at 0 K and then move towards the band with the lower
    effective mass as the temperature increases. As the electron and hole effective
    masses are usually not very different from the free-electron mass, the ratio π‘šπ‘*/π‘šπ‘›*
    in the logarithm is of order 1 and the shift of the Fermi level at most of order π‘˜π΅π‘‡ .
  27. 27Describe the shift of fermi level compared to band gap size in intrinsic semiconductorsIn intrinsic semiconductors, the shift of the Fermi level with temperature is usually
    small compared to the size of the band gap. In doped semiconductors, as discussed
    below, the Fermi level tends to shift much more.
  28. 28Describe the intrinsic and extrinsic carrier concentration at room temp for semi conductors, band gaps above 1eVthe intrinsic carrier concentration
    at room temperature is much smaller than the extrinsic carrier concentration
    from unavoidable defects and impurities
  29. 29Explain; How to change balance of free electrons and holes Donors and valence electrons of crystals, example Acceptors and valence electronsThe balance between free electrons and holes can be changed with the intentional
    introduction of chemical impurities. Donors have more valence electrons than are
    needed for the chemical bonds in the host crystal. An example are pentavalent
    phosphorus atoms in tetravalent silicon. The 5th valence electron is bound only
    very weakly and can easily be released into the crystal, whereby the free electron
    concentration increases. Acceptors have fewer valence electrons than are needed
    for the chemical bonds in the host crystal β€” they trap electrons and release holes.
  30. 30State the law of mass action (np)np is constant for a particular semiconductor at any given temperature irrespective of doping
  31. 31What does changing the balance between electrons and holes also changeschanges the conductivity by many orders of
    magnitude
  32. 32Describe hydrogen like impurity centresThe weakly bound electron in a donor and the weakly bound hole in an acceptor
    behave very similar to the electron in a hydrogen atom. To describe the impurity centre, start from the energy level in a hydrogen atom
    (with principle quantum number 𝑛) and replace (i) the free electron mass with the
    effective mass in the crystal and (ii) the permittivity of vacuum with that in the
    crystal.
    The average distance of the weakly bound electron
    from the impurity ion is larger than the near-neighbour interatomic distances in
    the host crystal. The crystal therefore screens the Coulomb interaction between
    the weakly bound electron and its impurity ion. This simple model rescales the
    hydrogen energy levels
  33. 33For hydrogen-like impurity centres, describe the location of the donor levelsthe donor levels are located inside the band
    gap of the intrinsic crystal and just below the edge of the conduction band. At
    room temperature (π‘˜π΅π‘‡ β‰ˆ 25 meV), electrons can be excited easily from the donor
    levels to the conduction band
  34. 34How is the radius of the donor electron orbit estimatedcan be estimated by rescaling the Bohr
    radius of the hydrogen atom
  35. 35Explain the diagram for far infrared absorption spectrum from Sb impurities in germanium, mention donor ground state binding energy, lower energy linesThe model of hydrogen-like impurity centres has been substantiated experimentally through far-infrared absorption experiments. An example is the above
    far-infrared absorption spectrum from antimony (Sb) impurities in germanium.
    The donor ground-state binding energy from the model is of the order 10 meV,
    and in the corresponding spectral range a series of sharp absorption lines has
    been observed [1]. The lower-energy lines correspond to excitations of the donor
    electron from an excited hydrogen-like level (𝑛 = 2, 3, 4) to the conduction band
    Explain the diagram for far infrared absorption spectrum from Sb impurities in germanium, mention donor ground state binding energy, lowe...
  36. 36For semiconductors, explain; interfaces, pn junctions, fermi level, band bending, external voltage applied,At the core of almost semiconductor devices are interfaces between differentlydoped regions in a semiconductor crystal β€” so-called 𝑝–𝑛 junctions. The important factor is here that the location of the Fermi level, which is close to the
    valence-band edge in a 𝑝-type semiconductor and close to the conduction-band
    edge in an 𝑛-type semiconductor. When the two semiconductor parts are in
    contact, the Fermi level has to be constant throughout the whole crystal and
    across the junction (from the definition of the chemical potential, which is the
    same as the Fermi level). As a consequence, the conduction and valence bands
    get β€œbent” across the junction. The hight of the step is of the order of the band
    gap, i.e., of order 1 eV. Without further explanation, if a sufficiently large external
    voltage π‘ˆ is applied with the right polarity, the step disappears and a current 𝐼 can
    pass through the junction. With the opposite polarity, no current passes. This
    is the fundamental principle of a semiconductor diode and the starting point for
    constructing transistors.

Information

Description
Year 4 ICMP Flashcards on LNs Weeks 9 and 10, created by R S C on 17/07/2024.
Created by
R S C
Views
1
Rating

Feedback

What is it about?

What do you think of the new look?

How do you like it?