GoConqr has a new look! Let us know what you think.

Flashcards

youngs modulus and hookes law

Nat Waterworth English 20 cards

Cards in this deck (20)

  1. 1state the difference between a tensile and compressive force.tensile force stretches and compressive force squashes
  2. 2definition of stress.the force applied per unit cross sectional area
  3. 3definition of strain.extension per unit original length
  4. 4define elastic materialwhen load is removed the material returns to its original shape
  5. 5define plastic material.when the load is removed it doesn't return to its original shape we say its been permanently deformed
  6. 6define Hooke's lawthe extension is proportional to the force up to the limit of proportionality
  7. 7In terms of energy what happens to a wire when stretched by a forcework is done on the wire, the wire is stretched and work done is in the form of elastic potential energy. as long as elastic limit isn't exceeded.
  8. 8define youngs modulusthe ratio of tensile stress to tensile strain in the hookes law region
  9. 9define elastic limit.the maximum stress at which a material will return to its original shape.
  10. 10example of brittle materialchina or glass
  11. 11example of strong materialcarbon fibre or steel
  12. 12example of a stiff materialsteel or glass
  13. 13example of ductile materialcopper or plasticene
  14. 14what has little or no plastic deformation before breakingbrittle material
  15. 15what has a very high ultimate breaking stressstrong material
  16. 16what has a very large plastic region before breakingductile materials
  17. 17what has a small extension with a force on itstiff material
  18. 18derive the formula work done = 1/2 F x Eelastic energy stored in a wire = work done on a wire
    work done = force x distance
    average force is taken as it changes so
    work done = 1/2 force x extension
  19. 19why doesn't rubber obey Hooke's lawextension is not proportional to force
  20. 20explain in terms of energy a rubber force extension curve, using loading and unloading and area between.the loading curve is the energy stored in the rubber when force applies.
    the unloading curve is the energy released when force is removed
    the area between is energy converted to heat

Information

Description
Flashcards on youngs modulus and hookes law, created by Nat Waterworth on 31/03/2016.
Created by
Nat Waterworth
Views
10
Rating

More on Hooke's Law and Springs

Feedback

What is it about?

What do you think of the new look?

How do you like it?