constructive process of a dwelling

constructive process of a dwelling

1. step one

   • site preparation
     • ·a backhoe and an excavator are used to clean the site
       • ·the site is leveled and wooden forms are placed to serve as a template for the foundation and dig holes and trenches.
         • ·Footings are installed
           • ·Once the concrete is poured into the holes and ditches, it will take time to heal.
             • . Once the concrete is cured, it is installed drains, sewers, water taps and any plumbing that must enter the first floor slab

2. step two

   • complete the approximate framing of the house
     • The floors, walls and roof systems are completed. The cladding is applied to the exterior walls and roof. doors and windows are installed, The coating is covered with a protective barrier

3. step three

   • Complete the plumbing, electricity
     • Once the frame is finished, the coatings and ceilings can be installed
       • Sewer and ventilation lines are installed, as well as water supply lines for each accessory
         • HVAC ventilation pipes are installed through the roof
           • Then, an electrician installs receptacles for electrical outlets, lights and switches,
             • Keep in mind that HVAC ducts and plumbing are usually installed before wiring

4. Step four

   • install insulation a more confortable consistent indoo climate, are insulated in all exterior walls,attic,and any floors that are located above

5. step five

   • Complete with drywall and interior textures
     • complete dryall start exterior finished start exterior finished drywall is hung and taped and drywall texturing is completed the primer coat of paint is also applied

6. step six

   • Complete the interior trim
     • install exterior driveways and walkways interior doors base boards, door casings, window sills, walk ways and patios are formed at this stage

7. step seven

   • Ceramic tiles, vinyl and wooden floors are installed

8. step eight

   • installation of bathroom accessories luminaires, electrical outlets and switches and the electrical panel is completed. Washbasins, toilets and faucets are placed.

9. step nine

   • installation mirrors, shower doors and carpets. Trees, shrubs and grass are planted and other exterior gardens are completed.

10. step ten

    • the builder will guide you through your new home to familiarize you with its features and the operation of various systems and components