Quiz
ASTQB Mobile Tester Certification Mock Exam
Este quiz tem tempo limite, por isso abre no player de sempre.
Perguntas do quiz (40)
1What types of testing are particularly important for mobile applications based on the user’s expectations?
- ASuitability and Accuracy
- BUsability and Performance
- CPortability and Usability
- DPerformance and Security
2If an application resides on the mobile device and was written specifically for that device, what type of application is it?
- AWeb-based
- BHybrid
- CNative
- DDevice-specific
3You are testing an application for a smart phone. You have determined that you only need to test one device from the target family of devices because the behavior of all devices in that family will be the same for this application. This is an example of what test design technique?
- ABoundary value analysis
- BCombinatorial
- CDecision tables
- DEquivalence partitioning
4If you are testing a mobile application that is not safety-critical, which lifecycle model is most likely to be used?
- AV-model
- BWaterfall
- CMobile model
- DIterative
5Which of the following requirements documents would be the best source to determine normal
usage scenarios?- ARequirements specification
- BUse cases
- CUser stories
- DUsability requirements
6In a project that is feature-rich but time-poor, which is the most reasonable approach to risk analysis?
- AConduct a full risk analysis, including weighted likelihood and impact ratings for each item
- BUse a lightweight approach and assign relative importance of each identified item
- CSkip the risk analysis step and proceed to test execution based on experience
- DConcentrate on the functional capabilities and disregard the physical capabilities of the device
since those should be tested by the manufacturer
7If you are testing a mobile banking application, is it important to test the interaction between the software and the device?
- ANo, it is not necessary to extend the functional testing to cover interaction with the device
- BYes, using the physical device is how the user interacts with the application and how the
application interacts with the Internet - CNo, if the application is developed as a native application, there is no need to test the
interaction because the application is portable across many different types of devices - DYes, each feature of the device should be tested to verify if it interacts with the application
8You are testing a native application for a smart phone. The application allows the user to make grocery lists on the phone and store up to three lists at a time. A list can contain up to 50 items. Which of the following is the minimum set of test conditions to achieve 100% coverage with the equivalence partitioning test technique?
- AList with 47 items
- BList with 0 items, List with 1 item, List with 50 items, List with 51 items, 0 lists saved, 1 list
saved, 3 lists saved, 4 lists saved - CList with 0 items, List with 25 items, List with 51 items, 3 lists saved
- DList with 0 items, List with 12 items, List with 58 items, 0 lists saved, 3 lists saved, 7 lists saved
9You are testing a native application for a smart phone. The application allows the user to make grocery lists on the phone and store up to three lists at a time. A list can contain up to 50 items. Which of the following is the minimum set of test conditions to achieve 100% coverage with the boundary value analysis test technique?
- AList with 47 items
- BList with 0 items, List with 1 item, List with 50 items, List with 51 items, 0 lists saved, 1 list
saved, 3 lists saved, 4 lists saved - CList with 0 items, List with 25 items, List with 51 items, 3 lists saved
- DList with 0 items, List with 12 items, List with 58 items, 0 lists saved, 3 lists saved, 7 lists
saved
10Correctness can be defined as a combination of which two quality characteristics?
- ASuitability and accuracy
- BUsability and performance
- CPortability and interoperability
- DSecurity and usability
11When conducting security testing on a mobile application, which is the correct set of basic areas to cover?
- AAccess, data protection, documentation
- BCode, functionality, documentation, security policy
- CData creation, data storage, data transfer
- DAccess, data storage, data transfer, security policy
12Which of the following types of testing might consider the user’s age?
- AScenario-based testing
- BUse case testing
- CUser story testing
- DPersona-based testing
13If your application can only be used within a specific country, what feature of the device might be used to supply information that the application can use to make this determination?
- AGeolocation
- BTelephony
- CMagnetometer
- DAltimeter
14What is the primary use of teststorming?
- ALoad and stress testing from multiple locations
- BTesting the device’s ability to deal with weather conditions
- CDeriving test cases and test scenarios
- DCreating masses of test data
15You have information from production that the previous version of your product has had a high rate of abandonment after the initial download. In fact, it appears people download the application and never use it. Poor performance is thought to be the main problem that is causing people to give up the application. Which of the following aspects of the application should be specifically targeted for testing to help determine if this is really the problem?
- AUser interface delays
- BIrregular performance
- CResource usage
- DApplication launch time
16Your company has created an application for doing crossword puzzles. The target users are in the age class of over 65 years old. There has already been considerable concentration on creating screens that are easy to navigate and intuitive. It is a primary goal that the software be easy to use. Viewability has been implemented with a revolutionary magnification ability based on moving a magnifying glass across the screen. The beta testers have still had problems using the application, particularly when trying to enter the letters into the squares. Given this information, which area should you target for more complete testing?
- ASimplicity
- BLayout
- CIntuitiveness
- DNavigation
17You are planning to conduct performance testing on a new application. You have been given a set of personas to use during this testing. How should you apply the personas in the performance testing approach?
- APersonas should be duplicated by the automated tools to create virtual users who can create a realistic load on the system.
- BPersonas should be reviewed to understand the individual tasks being performed. These tasks can then be scripted and performed in sets.
- CPersonas are used primarily for usability testing and should not be used as guidelines for performance testing.
- DPersonas should be used to derive use cases which can be broken down into user stories and then scripted into performance test scripts.
18If you are testing how much battery is being used by your application, what are you testing?
- ATask completion
- BDelays
- CUser interface delays
- DResource usage
19You have been doing your mobile application performance testing on a simulator. Why would you need to do some testing on a real device?
- ABecause a simulator is not an exact replica of the real device and may give different performance results
- BBecause it is not possible to thoroughly test a simulator to ensure it is working correctly
- CBecause simulators cannot be cloned to provide enough devices to generate a realistic
load - DBecause simulators cannot run concurrent applications
20Which of the following is a requirement for portability testing for the future of a mobile application?
- AKnowing how the application works today with today’s devices
- BAnticipating which devices will be popular and how they will be used
- CPredicting how personas will change
- DCreating new devices via emulators and testing the application on those emulators
21For a navigation application on a smart phone, which is the most importance device capability?
- ATelephony
- BCamera
- CEmail
- DGeolocation
22If a tool is able to simulate the way in which a specific device would respond to an application, it is considered to be what type of simulator?
- AA hybrid simulator
- BA native device simulator
- CA web-based application simulator
- DA browser-based application simulator
23Which of the following is a generic tool that would be useful for a mobile application testing project?
- AA simulator
- BAn emulator
- CA defect tracking system
- DA performance testing tool
24In what way might a mobile device itself supply data to the mobile application?
- ABy providing location information by using its geolocation capability
- BBy gathering input from the user
- CBy communicating with a backend system
- DBy connecting to another device
25Which of the following is true about a browser-based application?
- AIt is designed to exercise capabilities of a particular device
- BIt runs on the device
- CIt is portable to any device that can run the supported browser
- DIt is generally faster than a native application
26Which of the following is a reason to use simulators for testing?
- ASimulators give more accurate performance than real devices
- BReal devices can be difficult and expensive to procure in large quantities
- CSimulators can interact with users to provide feedback on usability
- DReal devices can be quickly configured to provide new testing scenarios
27You have just been assigned to test a native mobile application for a delivery recording device used by mail and package couriers. This is a new version of a product that is already in production. The production version of the product has had issues with the hardware particularly with capturing signatures entered on the device and with associating photo images to the proper delivery addresses. This has resulted in a problem with reconciling the package delivery information. You need to test the application on a network with 1000 of these devices sending information back to the main office. Budget is limited as is the ability to obtain 1000 devices. What should you do?
- AFind or develop a simulator that can simulate the network interaction of many devices
- BFind or develop an emulator that can emulate the application running on the hardware
and OS of the device - CImplement crowd-source testing to get a large number of people to use their own devices to test the network
- DObtain the real devices because any other testing will not be representative of the real
behavior of the device
28 You are responsible for performance testing for a new hybrid mobile application that will run on smartphones. The application will use the phone’s GPS capability to determine the altitude of the phone. This information will be used to send information to the user indicating the change in their “safe limit” for alcohol consumption. You expect your highest usage of the system to be on New Years Eve when many people are skiing at high altitudes and will need to check their safe limit. For the first year of usage, 5,000 concurrent users are expected to use the application on that one evening. Given this information, what is the best approach to use for conducting the performance test?
- AClone simulators to create 5000 users and conduct the test with those simulators
- BClone emulators to create 5000 users and conduct the test using the emulators
- CUse a mix of simulators and emulators to give the most realistic results
- DUse crowd-sourcing and real users to get accurate results from real devices
29You have a need to test network connectivity in a variety of environments to determine if your web site will respond fast enough and reliably enough to the requests from your mobile web-based application. You don’t have the ability to create these environments within your test facilities. What is the best option to use to conduct this testing?
- AFind or develop a simulator that can simulate the network interaction of many devices on varied networks
- BFind or develop an emulator that can emulate the network interaction of many devices on varied networks
- CFind a cloud-based network simulator that can generate network traffic from a variety of different networks
- DImplement crowd-source testing to get a large number of people to use their own devices to connect via various networks
30What is the best way to verify that a simulator is giving reliable results?
- ARead the requirements
- BTest the simulator
- CCompare the results to the results from a real device
- DCompare the results from the simulator to the results from an emulator
31Which cloud capability is most beneficial for performance testing?
- ASupporting a variety of network types
- BSupporting a variety of protocols
- CSupporting a variety of device types
- DSupporting a variety of device quantities and usages
32Which of the following is a type of data that a mobile performance testing tool should be able to monitor, track and generate?
- ABursts of activity
- BUsability information
- CNavigation flow data
- DSecure data transactions
33You are testing an application that will allow users to scan the barcode from a package mailing label and then receive emails from the package shipper as the package moves through the various stages of its delivery (e.g., pickup, receipt at central processing, routing, delivery). If requested, the user can also receive a picture of the signature of the recipient of the package. This is a web browser-based application. It is expected that this application will have wide usage across a large set of devices and networks with varying speeds and reliability.
Your company has several competitors who are working on similar products although your company’s product has some new innovations and a very attractive user interface. As a result, once it is released, your company expects to grab that majority market share.
Given this information, what would be the best approach for doing your testing to ensure the capabilities of the product are tested as well as the range of environments and networks?- AUse a remote device lab that is provided by a device manufacturer to ensure your application works across the whole family of devices
- BUse crowd sourcing to get the widest distribution of device locations and types with minimal cost
- CUse a set of simulators that can simulate the various capabilities of a wide variety of devices
- DUse a cloud-based virtual test environment to simulate various devices and networks
34You are testing an application that will allow users to scan the barcode from a package mailing label and then receive emails from the package shipper as the package moves through the various stages of its delivery (e.g., pickup, receipt at central processing, routing, delivery). If requested, the user can also receive a picture of the signature of the recipient of the package.
This is the second version of this application. The first version was web browser-based and was quite slow to start up. The new version is a native application with all the same functionality. It is expected that this application will have wide usage across a large set of networks with varying speeds and reliability.
Given this information, what would be the best approach for doing your testing to ensure the capabilities of the product are tested as well as the range of devices, environments and networks?- AUse a remote device lab that is provided by a device manufacturer to ensure your application works across the whole family of devices
- BUse crowd sourcing to get the widest distribution of device locations and types with minimal cost
- CUse a set of simulators that can simulate the various capabilities of a wide variety of devices
- DUse a cloud-based virtual test environment to simulate various devices and networks
35In the future, what is the expectation for device capabilities?
- AThey will decrease as devices get smaller
- BThey will increase as demand increases
- CThey will stay the same
- DThey will stay about the same but expand across a greater range of devices
36What will the future user expect in terms of application performance?
- AThey will expect it to be slower because they will understand that adding more features will necessarily compromise the speed of existing features
- BThey will expect it to be slower because devices will become smaller
- CThey will expect it to stay constant
- DThey will expect it to continue to increase
37When building a flexible testing framework, how does the short product lifecycle affect the test approach and tool decisions?
- AThe framework must support long-term maintainability
- BThe framework should utilize stable and reliable tools from known vendors
- CThe framework must provide a good ROI
- DThe framework should leverage a formal risk analysis
38Your organization has just hired a test automation architect who has previously worked on medical software with strict regulatory requirements. His test automation framework is very solid and will allow the staff to build maintainable data-driven test cases. His tool choice is the top of the line tool that has been used for many years for traditional test automation. You are concerned that this is a very expensive tool and may not have the flexibility needed in your environment, particularly since the mobile applications your company develops are intended to exist in the market for only six months before being re-worked to add new features and change the user interface. The software development lifecycle is iterative and the team uses continuous integration to provide testable software faster. Given this information, what should you recommended for the test approach?
- ASearch for other tools that are more suited for the mobile environment and consider creating test automation with keyword-driven tests rather than data-driven.
- BGo with the proven framework and seek high coverage in the test automation software to ensure good reuse.
- CBypass test automation and go with crowd-sourcing to get a high amount of testing done in a short period of time. Test repeatability is not an issue with this software.
- DUse test automation for performance testing and conduct the functional testing manually since the product has a short life expectancy.
39As lifecycle models adapt to meet the needs of the mobile application market, how will the interaction between the developers and testers change?
- AThe interaction will become more formal
- BDetailed requirements documentation will replace stand up meetings
- CDevelopers and testers will return to more traditional, separate roles
- DCollaboration between developers and testers will increase
40What type of testing methodologies should mobile applications testers seek?
- ALeaner and more efficient
- BFaster and more reliable
- CSecure and more usable
- DDocumented and more repeatable
Informações
- Descrição
- This test is a copy from the official mock test available from ASTQB website. Feel free to copy it and use to improve your studies.
- Autor
- Cláudio Pedroso
- Idioma
- English
- Visualizações
- 110
- Etiquetas
- Avaliação
- Ainda sem avaliações Avalie este quiz