O GoConqr está de visual novo! Conte para nós o que você achou.

Quiz

CCNA 3v5.03 Chapter 7

Christina Evans 24 perguntas

Fazer o quiz

Este quiz tem tipos de pergunta que abrem no player de sempre.

Perguntas do quiz (24)

  1. 1Refer to the exhibit. Which command should be used to configure EIGRP to only advertise the network that is attached to the gigabit Ethernet 0/1 interface?Imagem da pergunta 1
    1. Anetwork 172.16.23.64 0.0.0.63
    2. Bnetwork 172.16.23.0 255.255.255.192
    3. Cnetwork 172.16.23.64 0.0.0.127
    4. Dnetwork 172.16.23.0 255.255.255.128
  2. 2What is the purpose of using protocol-dependent modules in EIGRP?
    1. Ato describe different routing processes
    2. Bto identify different application layer protocols
    3. Cto use different transport protocols for different packets
    4. Dto accommodate routing of different network layer protocols
  3. 3If all router Ethernet interfaces in an EIGRP network are configured with the default EIGRP timers, how long will a router wait by default to receive an EIGRP packet from its neighbor before declaring the neighbor unreachable?

    1. A10 seconds
    2. B15 seconds
    3. C20 seconds
    4. D30 seconds
  4. 4Which two EIGRP packet types are sent with unreliable delivery? (Choose two.)

    1. Aupdate
    2. Bquery
    3. Chello
    4. Dreply
    5. Eacknowledgment
  5. 5Which destination MAC address is used when a multicast EIGRP packet is encapsulated into an Ethernet frame?

    1. A01-00-5E-00-00-09
    2. B01-00-5E-00-00-10
    3. C01-00-5E-00-00-0A
    4. D01-00-5E-00-00-0B
  6. 6What is identified within the opcode of an EIGRP packet header?

    1. Athe EIGRP message type that is being sent or received from a neighbor
    2. Bthe EIGRP autonomous system metrics
    3. Cthe EIGRP hold timer agreed upon with a neighbor
    4. Dthe EIGRP sum of delays from source to destination
  7. 7Why would a network administrator use a wildcard mask in the network command when configuring a router to use EIGRP?

    1. Ato lower the router overhead
    2. Bto send a manual summarization
    3. Cto exclude some interfaces from the EIGRP process
    4. Dto subnet at the time of the configuration
  8. 8An administrator issues the router eigrp 100 command on a router. What is the number 100 used for?

    1. Aas the autonomous system number
    2. Bas the number of neighbors supported by this router
    3. Cas the length of time this router will wait to hear hello packets from a neighbor
    4. Das the maximum bandwidth of the fastest interface on the router
  9. 9What information does EIGRP maintain within the routing table?

    1. Aboth successors and feasible successors
    2. Bonly feasible successors
    3. Cadjacent neighbors
    4. Dall routes known to the router
    5. Eonly successors
  10. 10Which table is used by EIGRP to storre all routes that are learned from EIGRP?
    1. Athe routing table
    2. BThe neighbor table
    3. CThe topology table
    4. DThe adjacency table

Informações

Descrição
sophomore CCNA 3 Quiz sobre CCNA 3v5.03 Chapter 7, criado por Christina Evans em 04-07-2016.
Idioma
English
Visualizações
41
Avaliação
Ainda sem avaliações
Avalie este quiz
Avalie este quiz

Fale Conosco

Sobre o que é sua mensagem?

O que você acha do novo visual?

Você gostou?