O GoConqr está de visual novo! Conte para nós o que você achou.

Flashcards

Genetic modification

Yasmin Beer Biology (Semester one) Inglês 102 flashcards

Explain key features of bacteriophages.

Flashcards do conjunto (102)

  1. 1What is radioactive decay. Explain the types.Radioactivity occurs when some isotopes are unstable.
    ALPHA - isotopes of 60 or> emit particles consisting 2 protons and 2 neutrons. Slow moving. 3cm in air. No external hazard. Contamination serious
    BETA - isotope with excess neutrons emit beta particles or positrons. Higher energy. 1m in air. External hazard
    GAMMA - electromagnetic radiation. Long range. External radiation.
    XRAYS - electromagnetic radiation. Long range. External radiation
  2. 2What is: - half life? - inverse square law?Half life - time take for half of radioactive material to become stable.
    Inverse square law - energy of radiation decreases in proportion to the square of the distance.
  3. 3Describe legislation with respects to radioactive material.RADIOACTIVE SUBSTANCES ACT 1993
    -concerned with record keeping, use, accumulation and disposal. Registration to use substances
    IONISING RADIATION REGULATIONS 1999
    -safety at work of users and others. Requires users to be competent.
    TRANSGRESSION + CRIMINAL OFFENSES
  4. 4Describe safety with respects to radioactive material.*Training
    *Shielding
    *Distance
    *Reducing exposure time
    *Personal dosimeters
    *Never work alone
  5. 5Describe properties and usage of Phosphorus-32.- Half life 14.3 days
    - Beta radiation
    - 790cm range in air
    - Detect using Geiger-Muller tube
    - 1cm of perspex shielding
    - used to label nucleic acids (DNA fingerprinting)
  6. 6Describe properties and usage of Sulfur-35.- Half life 87.4 days
    - Beta radiation
    - 26cm range in air
    - Detect using Geiger-Muller tube
    - 1cm of perspex shielding
    - used to label proteins
  7. 7Describe properties and usage of Tritium-3.- Half life 12.4 years
    - Beta radiation v low energy
    - 6mm range in air
    - Detect using swabs and liquid scintillation
    - No shielding
    - used to label sugars
  8. 8Describe properties and usage of Iodine-125.- Half life 59.6 days
    - Gamma and Xray
    - long range
    - Detect using scintillation counting and thyroid scans
    - Lead shielding
    - used to label peptides
  9. 9What is gene cloning? Outline basic principals.-Involves the purification, isolation and amplification of nucleic acids molecules and then insertion into a cloning vector.
    -Amplification via polymerase chain reaction or using cloning vector
    - cloning largely depends on prokaryotic biology especially ECOLI
    *insertion of DNA fragment into vector
    *Transportation of recombinant molecule into bacterial cell
    *Multiplicaton of cell
    *production of colonies
  10. 10Why clone genes?- Provides a pure sample of gene of interest which can be used for study
    - Enables gene to be modified and introduced into organism
    - Enables genomes to be sequenced
    - Drugs/antibiotics/enzymes
  11. 11Explain purification of total DNA from E.Coli*Grow culture - defined or undefined media, constant measurement of conditions
    *Harvest bacteria - in late exponential phase via centrifugation
    *Preparation of cell extract - bacteria pellet suspended in lysis solution that disrupts wall and membrane, centrifuged to get rid of debris, DNA and proteins remain
    *DNA purification - degradation of contaminants, separation from contaminants.
    *Concentration of DNA
  12. 12Explain the method of DNA purification.Phenol denaturing proteins - nucleic acids and protein extract mixed with phenol, coagulates, centrifugation separates nucleic acid which is then pipetted off.
    Ion-exchange separation of DNA - negatively chranged will bind to positively charged resin
  13. 13Explain the method of concentration DNA.Precipitation of DNA - add ethanol and salt in order to precipitate DNA, cool at 0c for a day, DNA can then be spooled out onto glass rod
    Testing purity - measured in UV spectrophotometer, ratio of a260:a280 indicates purity.
  14. 14Explain purification of plasmid DNA.PREPARATION OF CLEARED LYSATE - gentle lysis in isotonic solution, trition-x-100 ruptures the membrane, dna remains in large pieces, cleared lysate pipetted
    ADDING ETHIDIUM BROMIDE - intercalates between strand of double helix, buouyant density of linear DNA reduced more than super coiled = separated
    CENTRIFUGATION - extended ethidium bromide-caesium chloride centrifugation produces density gradient
  15. 15Explain the process of purification of mRNA.mRNA is poly(A) at 3' end and this provides useful tag.
    OLIGIO-(dt)-CHROMATOGRAPHY
    *A small column is constructed containing oligo-dt-cellulose
    *The total RNA is added in high salt buffer, binds oligio and mRNA
    *Medium salt buffer is added which washes of the RN which is unbounded
    -A buffer without salt is poured through and this unbinds poly(A) and oligio
  16. 16Explain function of nucleases.EXONUCLEASES - remove nucleotides at end of NA molecules
    (BAL31 digests end, EXONUCLEASEIII removes 3' terminal)
    ENDONUCLEASES- breaks internal phosphodiester bonds
    (S1NUCLEASE digests single stranded dna, DNASEI chops up all dna)
    *restriction endonucleases recognise certain sequence*
    *ribonuclease degrades RNA*
  17. 17Explain function of ligases.Natural function is to repair single stranded breaks
    - used to join DNA molecules in cloning
  18. 18Explain function of polymerases.These make copies of nucleic acids
    -DNA polymerase-I from E.Coli naturally rapirs DNA, this require short hydrogen primer.
    -part of polymerase used without proofreading ability KLENOW FRAGMENT.
  19. 19Explain function of reverse transcriptase.From retroviruses, synthesises DNA from RNA template
    - used for cDNA cloning and mRNA cloning
  20. 20What is the natural function of restriction endonucleases?Host-controlled restriction
    - cleave bacteriophage DNA and prevent infection
    - bacteria DNA methylated at restriction sites to protect from own enzyme
  21. 21List type-II restriction endonucleases.Recognise specific DNA sequences 4-6 bases long
    *ECORI - gaattc - sticky ends
    *BAMHI - ggatcc- sticky ends
    *ALUI - agct - blunt ends
    *SAU3A -gatc - blunt ends
    Sticky ends have unpaired bases, BAMHI and ECORI produces same sticky ends so fragments can be ligated.
  22. 22Explain frequency of recognition sites.Within a random sample frequency can be measure
    -Tetranucleotide = once every 4^4 bases
    -Hexanucleotide = once every 4^6 bases
  23. 23Describe the method of using restriction enzymes.- Reaction carried out in a microfuge tube
    - Requires buffer
    - Incubated at 37c
  24. 24Explain the method of Agarose Gel Electrophoresis.PREPARING GEL -agarose and buffer heated, cooled to -50c, added ethiduium bromide, add comb to produce wells
    PREPARING DNA - agarose gel placed in electrophoresis tank, DNA mixed with loading buffer
    GEL ELECTROPHORESIS - DNA loaded into well , negatively charged so moves towards anode, smaller fragments move further
    VISUALISING FRAGMENTS - stain gel with eithidium bromide lace gel on UV illuminator
  25. 25What is restriction mapping? Explain the process.Can size fragments and work out relative positions of restriction sites
    -digest DNA with enzyme alone
    -then perform double digest in which all combinations used in pairs
    - separate single and double digest on agarose gel
    -accurately size all the fragments
    -through logic you can work out positions
  26. 26Explain the action of DNA ligase. Define inter and intra-molecular association.DNA ligase joins DNA molecules together, requires ATP = produces recombinant molecules
    INTER - molecules from same digest join, ie plasmid closes
    INTRA - molecules from different digests join
    *Alkaline phosphatase removes 5' from plasmid and prevents self ligation*
  27. 27What is a plasmid?Plamids are independently genetic elements found in bacterial cells. They are circular molecules that vary in size.
    -autonomous
    -binary fission
  28. 28List desirable vector characteristics.SMALL IN SIZE - less easily damaged, easier to manipulate
    SELECTABLE MARKER - distinguishes between plasmid and non-plasmid containing cells
    RANGE OF RESTRICTION SITES
    IDENTIFICATION OF RECOMBINANTS
    HIGH COPY NUMBER
  29. 29Explain the antibiotic resistance marker.Selectable marker enables selection of plasmid containing cells
    = issues with resistance
  30. 30Describe key features of PBR322 vector*plasmid
    *Ampicillin resistance
    *Tetracycline resistance
    *SALI, BAMHI, ECORI
    = when cloning cut with BAMHI
  31. 31Explain the process of transformation.Process by which E.coli cell are encouraged to accept plasmid.
    -E.Coli cells treated with cold cacl2 makes cells permeable to DNA
    - Incubate with ligation products
    - Heat shock at 42c which allows dna to enter cell
  32. 32Explain positive selection and insertional inactivation.*positive selection - i.e cells containing plasmid are ampicillin resistant therefore survive of ampicillin media
    *Insertional inactivation - i.e cells containing recombinant plasmid disrupt tetracycline resistant gene therefore die when plated on this media.
  33. 33Describe key features of PUC8 cloning vector.*Plasmid
    *Ampicillin resistance
    *Restriction sites, ECOR1, BAMHI, SAL1
    *Lac-z gene
    =very useful vector !
  34. 34Explain role of LAZ-Z gene.Positive selectable marker for cells containing recombinant plasmids
    -use auxotrophic mutant for laz-z gene
    -non recombinant plasmid has function gene = white to BLUE
    - recombinant plasmid has inserted gene in middle of laz-z gene = WHITE
  35. 35Explain key features of bacteriophages.HEAD AND TAIL - typical of bacteriophage lambda, double stranded DNA, genome 50kb, cloning large DNA genes
    FILAMENTOUS - typical of M13, single stranded genome, 10kb, used for dna sequencing.
    Explain key features of bacteriophages.
  36. 36Explain M13 lifecycle.- injection of single stranded DNA into the host cell
    -Synthesis of second strand of DNA produces double stranded molecules
    -Replication method changes to rolling circle which produces linear single stranded DNA
    - this is then packaged into protein cote, mature phage form
    *REPLICATIVE FORM - double stranded
    *INFECTIVE FORM - single stranded
  37. 37Explain cloning in M13 vectors.*Lac-z and restriction sites transferred into M13
    - Restriction fragments are ligated into double stranded M13 vector
    -Ligation products transfected into E.Coli
    -Cells plated out onto E.coli lawn
    - White plaques used to infect E.coli
    -Infective form uses in sequencing
  38. 38DEFINE: -Transformation -Infection -TransfectionTRANSFORMATION - introduction of plasmid into bacterial cells
    INFECTION - infection of bacteria cell by bacteriophage
    TRANSFECTION - introduction of naked DNA into bacteriophage
  39. 39Explain Lambda's Lytic cycle.Head and tail bacteriophage, has two life cycles:
    LYTIC - λ infects E.coli as linear DNA, inside the E.Coli λ circularises and replicates as a circular molecule, then changes to rolling circle replication, long strands of genome produced and separated by cos site, this are packaged by enzymes into linear λ genomes
    =E.Coli then lyses releasing λ to infect other cells.
  40. 40Explain Lambda's Lysogenic cycle.LYSOGENIC CYCLE - In the lysogenic cycle λ infects ecoli, instead of replicating the DNA integrated into host cell chromosome and is passively replicated. under certain circumstances it can integrate and enter lytic cycle.
  41. 41Explain the importance of cos ends in λ.-left and right cohesive ends
    =allows circularisation on infection
  42. 42Explain advantages and disadvantages of λ and how to solve them.ADVANTAGES - highly efficient infection, produces more clones
    = replace genes concerned with lysogeneic cycle +15kb
    DISADVANTAGES - small genome, small limitations on size of DNA cloned, multiple restriction sites means many fragment molecules
    = restriction sites can be eliminated via successive rounds of selection, in vitro mutagenesis
  43. 43Explain λ insertion vectors.CONSTRUCTION - non essential region cut out with restriction enzymes and molecule ligated together
    CLONING - cut DNA and λ with same enzyme, ligate V arms and inserts, add packaging mix , enzymes recognise cos sites and package them (in vitro packaging), infect E.coli, plate out
    =obtains millions on plaques
  44. 44Explain λ replacement vectors.If all of non essential region removed this increases clonable size, however there is a minimum requirement
    - stuffer fragment used bordered with convenient restriction sites
    -stuffer fragment excised and replaced by cloned DNA
    - recombinant molecules packaged as normal
  45. 45What is a cosmid? Explain key features.Cosmids are hybrids between λ and plasmid
    - enable large piece of DNA to be cloned
    - efficient infection of E.coli
    -behaves like plasmid in E.coli
    *Ampicillin resistant gene
    *Cohesive ends
    *ori allows replication like plasmid
  46. 46Explain the process of cloning in cosmids.- Cut cosmid with BAMHI
    - Cut DNA with BAMHI and in vitro package
    - ligate two products
    - infect E.Coli
    - plate cells on ampicillin
    =positive selction
  47. 47What is a genomic library?-A collection of cloned fragments that together encompass the whole genome of the organism
    -A genomic library contains all the genes of an organism as well and non coding regions
    = λ replacement vectors and cosmids used for construction of genomic libraries
  48. 48What is the equation used to calculate how many clones are required?N=Ln(1-p) / Ln(1-a/b)
    *P= probability gene is present
    *A= average size of insertion vector
    *B= total size of genome
  49. 49What problem may be encountered when constructing a genomic library? Give a solution.- 6 cutter enzyme BAMHI produces wide range of fragment sizes, many too small, some too large
    -4 cutter enzme SAU3A fragments are too small
    = perform partial digest with SAU3A, size selct 15-22kb fragments
    =clone into BAMHI vector select sizes 25-25kb
  50. 50Explain cloning in other bacteriaRange of plasmid vectors
    -Bacterial artificial chromosomes, can clone up to 300kb
    -Bacteriophage p1, can clone up to 110kb
  51. 51Explain cloning in: -Yeast -Plants -MammalsYEAST - range of vectors based on yeast's 2m plasmid
    PLANTS - several ways of introducing genes into plants, Ti plasmid most common
    MAMMALS - vectors based on simiam virus 40
  52. 52What is meant by differential gene expression?Different sets of genes are active in different cell types during different stages of development
    - can isolate RNA and us cDNA to make a double stranded copy
  53. 53Explain the cDNA cloning methodTo clone mRNA we must make DNA copy
    - use reverse transcriptase to synthesis complimentary strand this requires
    *RNA template, DNA primer, dNTPS
    -Oligio(dt) primer pairs to poly(A)tail of mRNA
    -reverse transcriptase then uses this to produce a complimentary strand
    -ribonuclease H then used to partially degrade RNA strand, remaining parts act as primers, dNTPS added and then RNA pieces replaced by proof reading capacity.
  54. 54How is cDNA cloned?cDNA is blunted ended so linkers need to be added
    LINKERS - short synthetic double stranded oligionucleotides with restriction sites.
    - cDNA ligated with linkers digested with RE
    -cDNA inserted into λ vector and cloned
  55. 55Explain key features of yeast 2um plasmid.-REP1 and REP2 involved in replication
    -ORI site of replication
    -No selectable marker
    =can use auxotrophic yeast mutant with mutant leu2 gene
    =plasmid contains complimentary gene
    =only recombinant plasmid containing cells survive on minimal media
  56. 56Explain key features of YEP13 vector.Yeast episomal vector
    -shuttle vector used in both ecoli and yeast
    -can replicate as independent plasmid
    -can integrate into yeast genome
    -ampicillin resistance
    -tetracycline resistance
    -ORI site of replication
  57. 57Explain cloning using YEP13 in yeast.-Desired recombinant plasmid transformed into yeast
    -purify DNA from several clones
    -Transform recombinant plasmid into yeast
    -purify yeast by growing on minimal media
  58. 58Explain key features of Ti plasmid.Used in cloning of plants
    -tumour inducing plasmid, on infection T-DNA transferred into plant cells, genes expressed which cause cell division leading to tumour = oncogenes removed in vector replaced by selective markers
    -virulence region involved in infecting the plant
    -host specificity region involved in recognition of different plants.
  59. 59Explain cloning in animals.DROSOPHILIA MELANOGASTER
    -vectors based on p element
    = transposible elements
    =genes that can move from one chromosomal location to another
    *plasmids contain two p elements
    =microinjected into fly embryos
  60. 60Explain purpose of cloning in mammals.GENE KNOCKOUTS
    PHARMING
    GENE THERAPY
    -based on simian virus 40
  61. 61What are the two basic strategies used for identifying clones?DIRECT SELECTION - set p so only desired clone can survive (cannot be used with eukaryote gene)
    marker rescue varient - axotrophic mutant and complimentary gene
    CLONE IDENTIFICATION - shotgun cloning of all gene in cell, identification via individual analysis.
  62. 62What is a magic pointer? Explain how they are used in clone identification.POINT OUT REQUIRED GENE:
    - see if gene has been clones from another organism
    - ask for clone of gene and sign material transfer form
    -perform nucleic acid hydridisation
  63. 63Explain process of nucleic acid hybridisation.-Use heat to separate DNA strand of double helix
    -On cooling single strands will attempt to rehybridise = degree of hybridisation depends on extent of similarity
    - energy used to separate hybrid strands = this can be measure by stringency
    - stability o f nucleic acid hybrid depends on degree of hybridisation
    =HETEROLOGOUS PROBING
  64. 64How can library screening be used to identify clone?lllllllllllolo
  65. 65How can amino acid sequencing be used to identify clone?Sometimes you cannot use someone else's gene, however you can use corresponding protein
    -determine amino acid sequence of part of your protein
    - use genetic code to reverse translate amino acids to nucleotide
    -design oligio probe
    -radio label oligio and use to probe library
  66. 66Explain the synthesis of degenerate oligio.Use amino acid sequence
    -because of degeneracy the oligio has 16 possible sequences
    - synthesise all 16 variables
  67. 67How can antibodies be used to identify clone?In some cases is is possible to use antibodies for clone identification
    -raise polyclonal antibody by injected purified protein into rabbit
  68. 68What is polymerase chain reaction? What is it used for? And what does it require?Requires a minimum DNA sequence
    - used for exponential amplification, enables identification and isolation
    -depends on TAQ polymerase which works at high temperatures
    - primers
    -supply of dNTPS
  69. 69Explain process of PCRMIX - DNA, forward and reverse primers, TAQ polymerase and buffer
    HEAT 94c - to denature DNA
    COOL 55c - to allow primers to anneal
    HEAT 74c - to allow TAQ polymerase to synthesise long products
    =repeat cycles accumulate short fragments exponentially.
  70. 70List disadvantages of PCR*Risk of contamination
    *Primers need to be highly specific
    *No proof reading enzyme
    *Limits to size of DNA amplified
  71. 71What is a primer? How are they designed?A primer is a short strand of DNA/RNA that serves as a starting point for synthesis
    -17-22 bases in length
    - end in g/c as more bonds
    -short primers will hybridise at random due to change, longer primers more specific
  72. 72Explain cloning of PCR products.PCR products often have an extra 3As this prevents blunt end cloning
    - clone in vector with 3Ts
    -incorporate e at 5'end of PCR primers
    - amplified product cut with re to give sticky ends
    =cloned into normal plasmid vector
  73. 73Explain the method of southern hybridisation.Means of detecting position of gene on DNA molecule
    -digest DNA with restriction enzymes
    -separate by agarose gel electrophoresis
    - transfer to nylon membrane
    - immobilise DNA fragments on membrane
    - Denature DNA
    -hybridise with labelled probe
    -expose on x-ray film
    -auto radiography identifies gene of interest
  74. 74What are restriction fragment length polymorphisms (RFLPs)? What are they used for?*Changes in DNA sequence that change the length of restriction fragments due to
    -change in restriction site or insertion/deletion between sites
    USED TO DETECT
    -gene copy number
    -mutation
    -genetic diversity
    -population genetics
  75. 75How are RFLPs identified?-DNA digested with restriction enzyme
    - Separated via electrophoresis
    - Clone hybridisation probe attached to region containing gene
    -Agarose gel southern blotted and hybridised with probe
    = detects change in band pattern
  76. 76Explain DNA sequencing.Southern hybridisation using chain terminating nucleotides - ddntps
    =cannot synthesise phosphodiester bond
  77. 77What are the two approaches to genome sequencing?SHOTGUN APPROACH - break genome into random fragments, overlaps identified, used to build continuous genome
    CLONE CONTIG APPROACH - overlapping clones identified and map generated prior to sequencing
  78. 78Explain the shot gun approach.-DNA fragmented using ultrasound
    -Separated on agarose gel
    -Fragments 1.6-2kbp collected
    -Clone library created
    -End sequenced obtain
    -Overlapping sequences obtained
    -Gaps closed between contigs.
    =problem: additional repeats can mess up data
  79. 79Explain the clone contig. approach.More time consuming and expensive but better for larger genomes
    -use cloning vectors that can hold large fragments
    -individuals fragments separated via shotgun approach
    -genome built up step by step
  80. 80What can be done with available sequences?GENOME ANNOTATION
    IDENTIFYING OPEN READING FRAMES
    orphan - gene of unknown function
  81. 81List the regulatory regions that control gene expression.*Promoters
    *Enhancers
    *Supressors
    *Tissue, developmental, environmental motifs
  82. 82What is northern hybridisation used for? Explain the processTotal separation of RNA on electrophoresis gel
    -use denaturing buffer since RNA binds to itself
    -blotted onto nylon membrane
    -hybridised with radio labelled gene probe
    -auto radiography on x-ray film
    =position indicates size
    =vibrancy indicated amount
  83. 83What is quantitative real time PCR?Alternative to northern blotting based on exponential growth of DNA in PCR
    -mrna converted into cdna
    -amplifed but avoiding saturation
  84. 84How do you identify DNA-binding proteins?GEL RETARDATION
    -transcription factors are large
    =decreased mobility
    =moves more slowly
  85. 85How do you identify regulatory motifs?VIA DELETION ANAYLYSIS
    -located regulatory motifs and indicates function of motifs
    PROBLEMS
    - to analyse expression must reintroduce into organism, have to be able to identify modified gene
    =use reporter gene
  86. 86What is a reporter gene?Substitution of original gene with ones who's activity is easily detected
    GUS - blue
    LUX - light
    GFP - green fluorescent
  87. 87What is promoter deletion analysis? How is it done?Deletions made
    -removal of restriction fragments
    -Open at restriction site, remove nucleotides with BAMHI and religate
    -used to identify key nucleotides
  88. 88What is in vitro mutagenesis? Explain the process.Proteins can also be analysed to identify key amino acids using similar approaches to pda
    = generate mutation in coding sequence
    *restriction enzymes removes pieces of DNA
    *BAL32 used to removed nucleotides from internal site
    *oligionucleotide add nucleotide
  89. 89Explain the two techniques used to culture microorganisms.BATCH - culture in large vessels used to produce pure products from microorganisms, products purified via centrifugation
    CONTINUOUS - culture controls the inflow and outflow to maintain culture in homogenous growth condition. product purified from outflow
  90. 90Explain the expression of eukaryote gene in prokaryotes.There are major differences in genes and cells:
    -regulatory sequences
    - introns
    -post transitional processing
    =use prokaryotes promoter and signals to drive eukaryote gene
    = use cDNA to eliminate problem of introns
  91. 91What is a promoter? Give 3 examples.A promoter is a region of DNA that initiates transcription of a particular gene
    LAC PROMOTER - induced by IPTG
    TRP PROMOTER - induced by 3-b-indoleacyrylic acid, repressed by tryptophan
    λPi PROMOTER - temp sensitive
  92. 92Explain protein expression in yeast vs. animal cells.YEAST - range of useful promoters, hyperglycosylation problem of functionality, secretion of proteins not very efficient, some differences from mammals
    ANIMAL CELLS - grow on surfaces, slower growth, use expression vectors with strong promoters
  93. 93Give pharmaceutical uses of gene cloning.RECOMBINANT INSULIN - synthesised in E.Coli, clone a and b fragments in different vectors join via disufide bridge.
    RECOMBINANT VACCINES - using purified pathogen protein elicits immune response, this protein can be made by cloning vectors
  94. 94Give farming uses of gene cloning.TRANSGENIC ANIMALS - gene injection into somatic cells, nuclear transplant and implantation
    PHARMING - high value product produce clone
    PLANTS
  95. 95Why identify genetic diseases?Many infectious diseases are now controlled therefore genetic diseases are more prominent
    - allows therapies to be designed
    - permits screening programs
    - possible gene therapy
  96. 96How do you identify a diseased gene?Genetic mapping
    - linkage analysis
    -pedigree analysis
    E.g breast cancer gene
    -many woman analysed found similar sequences in all on long arm of chromosome 7
    BRCA1 gene
  97. 97What are the two methods of gene therapy?GERMLINE THERAPY - Introduction of the correct gene into a fertilised egg and reimplantation into the mother, gene is therefore expressed in all cells.
    SOMATIC THERAPY - manipulation of cells by transfection and reintroduction into the body
  98. 98Explain somatic gene therapy. Give example.*Bone marrow stem cells used to treat haemophilia
    *Treating cystic fibrosis
    - adenovirus vectors or liposomes inhaled into lungs and gene is taken into epithelial cells, this has to be repeated continuously for effectiveness, these methods only work for recessive disorders
  99. 99Explain gene therapy and cancer.Many cancers involve the expression of an oncogene
    - therefore inactivation can prevent cancer
    - expression of antisense version of oncogene
    *introduce gene in reverse orientation
    *produced antisense RNA
    *two strands hybridise
    *degraded by cell
  100. 100Explain insect pests and insecticides.Insect pests destroy crops = farmers uses insecticides
    BACILLUS THURINGENSIS - produces own endotoxin kills insect larvae, introduced via Ti vectors
    = INSECTS FIGHT BACK, resistance developed.
  101. 101Explain weeds and herbicides.Weeds compete with crops and reduce crop yield = farmers use herbicides. Such as glyphosate however this kills all plants.
    ROUND-UP READY CROPS - mutant crops that are resistance to glyphosate, transformed into crop plant
    = WEEDS FIGHT BACK, resistance in weeds
  102. 102Explain gene subtraction and fruit ripening.Antisense expression of polygalacturonase
    -reduced softening
    -delays ripening

Informações

Descrição
Biology (Semester one) (Cell and Molecular Biology) FlashCards sobre Genetic modification, criado por Yasmin Beer em 22-01-2018.
Criado por
Yasmin Beer
Visualizações
1
Avaliação

Fale Conosco

Sobre o que é sua mensagem?

O que você acha do novo visual?

Você gostou?