Performance 10

Performance 10

1. Power Saving Program

   • Decrease the Auxiliary Power
     • Full Load
     • Partial Load

2. Making BTG Operator a Key Player for Efficiency Improvement

   • Condenser pressure
   • Reheat temperature
   • Hot well temperature
   • Reheat spray flow
   • Exit Gas Temperature
   • Incomplete Combustion
   • Throttle pressure
   • Super heat temperature
   • Feed water temperature
   • Super heat spray flow
   • Station service power
   • Excess oxygen

3. Decrease the Loses

   • Mechanical
     • Leak Control
       • Internal Leak (Passing)
         • Category 1
           • Boiler (i.e., superheater header drains, reheat header drains, etc.)
           • Turbine cycle drains (i.e., stop valve above and below seat drains, turbine loop line drains, trap on extraction piping, etc.)
         • Category 2
           • High pressure feedwater heater drains, Low pressure feedwater heater drains, Boiler feedwater pump minimum flow recirculation valves, Attemperation valves, etc.
       • External Leak
         • Category 3
           • include all steam trap in the plant
         • Category 4
           • include all safety valves (steam or water)
   • Electrical
     • Monthly report for all photo cell
     • Controlling the electrical power of Offices Lighting, controlling the HVAC temperature in night and holidays
     • Check the losses through transformer by Losses Test

4. Controlling the Startup & Shutdown Time

   • Cold Startup
   • Worm Startup
   • Hot Startup
   • Very Hot Startup
   • Shutdown

5. Control Boiler BlowDown

   • Chemical Injection Optimization

6. Efficiency Measurements

   • Performance Test
   • Cycle Circulation Test