Quiz
Final Exam for Stained Glass
Crie uma conta grátis para terminar este quiz
Salve seu progresso e veja sua nota final.
Já tem uma conta? Inicie sessão
Perguntas do quiz (26)
1This tool is used to create a score line in the glass, so the glass will break along that line.
- AGlass Runner
- BGlass cutter
- CGlass Knife
2When scoring the glass, I should start and stop my cutter a lot, and I can start my cut in the center of the glass.
- AVerdadeiro
- BFalso
3This type of pliers are good for what?
- ATo break small pieces of glass for Mosaic
- BTo break curved or small pieces of glass from a scored line on glass
- CTo hold stained glass pieces while soldering to keep hands from burning
4What is the name of this tool?
- AGrozing pliers
- BWheeled Nippers
- CRunning Pliers
5True or false? This tool is very inexpensive, and should be thrown in the bin, or not turned back in at all.
- AVerdadeiro
- BFalso
6What is this?
- ASolder Iron Stand
- BFlux Stand
- CPatina stand
7When do you apply this to your tiffany stained glass?
- AThis is patina, you apply it when you are soldering your pieces together
- BThis is patina, you apply it as the absolutely last step in your process
- CThis is patina, you choose either copper or black, and apply to the solder lines after you wash off the flux from soldering.
8Glass cutting oil is very important to have on your glass cutter because...
- Athe wheels in the glass cutters need oil to keep glass clear from the axel and lubricate so they roll smooth
- Bthe oil creates a line for the glass to break
- Cthe teacher tells me to do it, but I have no idea why
9How do you apply this to your glass?
- ASpray on your glass, and let set for 5-10 minutes before wiping off
- BDrip on seams, and scrub with patina buddy
- CTake a few drops and buff glass and seams, then use clean clothes to continue buffing until shiny
10What do you see in this picture?
- AFoil Wrap
- BCopper wire
- CCooper paper
- DCopper foil
11These are not scissors...what is it?
- APattern cutter
- BFoil pattern sheer
- CThree blade scissors
12I'm ready to copy my pattern, what do I do?
- AMake a copy with a copy machine and cut out the pieces with scissors
- BMake a copy with carbon paper, tape down the original, trace with black pen and cut one out pieces with scissors
- CTape down a new paper, tape down the carbon paper black side down, tape down original copy, and trace with colored pencil, and cut out copy with pattern sheers
13What is this? What is it for?
- AThis is flux, used to cool the iron when soldering glass together
- BThis is flux, it is used to clean the surfaces of the copper so the solder can fuse with the foil
- CThis is flux, it is used for creating a black line along the solder line
14What is this?
- AA one hundred and ten watt soldering iron
- BAn eighty watt soldering iron
15What is in this picture?
- ABlack Patina
- BBlack granite
- CBlack grout
- DChocolate
16What is this?
- AFib
- BFid
- CFoiler
- DCopper foil
17What tool would I use when I'm braking off a long straight score on a piece of glass?
- AGrozing Pliers
- BRunning Pliers
- CWheeled Nippers
- DGlass Cutter
- AGrozing Pliers
18Why is it important that you burnish the copper foil until smooth?
- ATo make the solder shiny
- B Because you have to activate the glue on the tape, and that's the only way it will stick
- CSo the flux and other liquid can not get under the copper foil and weaken the solder line
- DBecause Mrs. Ross said to
19When choosing to cut my patterns on a piece of glass, I will always plan my designs on my glass, so I am able to cut the smoother side.
- AVerdadeiro
- BFalso
20When I am finished with my grout mixture, I should rinse the rest of it down the drain.
- AVerdadeiro
- BFalso
21Chose the correct order of operations.
- ACopy pattern, cut pattern with foil sheers, cut glass patterns, grind pieces to fit, wash pieces, copper foil and burnish smooth, tack and solder seams, wash clean, patina finish, buff shiny with finishing compound
- BCopy pattern, tack and solder seams, cut pattern with foil sheers, wash clean, cut glass patterns,copper foil and burnish smooth, grind pieces to fit, wash pieces, patina finish, buff shiny with finishing compound
- CTack and solder seams, copper foil and burnish smooth, cut pattern with foil sheers, wash pieces, copy pattern, wash clean, patina finish, cut glass patterns, grind pieces to fit, buff shiny with finishing compound
22One way to put emphasis on a detail in your mosaic is to make all the glass the same exact size.
- AVerdadeiro
- BFalso
23If I want to emphasize the water in my mosaic I could... (check all that might apply)
- ACut solid blue glass in the a uniform shape
- BCut blue glass glass in a wavy shape for texture
- CUse multiple colors of blue to show movement
- DPlace one piece of a solid blue glass where the water is
24Which options do we have for a patina finish? Choose all that apply.
- AWhite Patina
- BBlack patina
- CGold Patina
- DBlue Patina
- ENo patina-Silver solder finish
- FSilver Patina
- GSolder Patina
- HCopper Patina
25What does 60/40 Solder mean?
- A60/40 solder is the cost of solder
- BIt's 60% tin and 40% lead.
- C60% lead, 40% tin
- D60% Copper, 40% lead
26Did you fill out the course evaluation?
- AYes
- BNo
Informações
- Descrição
- This is a comprehensive exam, to measure the learning of students who took the stained glass class at Totino Grace high school
- Autor
- BossRoss
- Idioma
- English
- Visualizações
- 260
- Etiquetas
- Avaliação
- Ainda sem avaliações Avalie este quiz