Simulado

Question 1

In an open account case, the customer contact details are captured. The customer can
 provide several addresses which are stored in the page group Addresses. One of the addresses is the primary address used for correspondence with customer. To easily identify the primary address, you add a PrimaryAddress page property in the case type.
 How do you link PrimaryAddress to the relevant entry in Addresses without duplicating data on the clipboard?

Accepted Answer

Configure .PrimaryAddress as a reference property

Answer

Configure .primaryAddress to refer to a data page

Answer

Configure a data transform to set the primary address

Answer

Configure .PrimaryAddress to point to a keyed data page

Question 2

Which configuration allows you to control which user roles can add attachments to a case?

Accepted Answer

Configure a privilege on the attachment category

Answer

Enable attachment level security on the attachment category

Answer

Configure a when rule on the attachment category

Answer

Update the access control setting for adding attachments in the access manager

Question 3

An application has the following application rulesets.

Expenses:01-01 TGB:01-01 TGBCatalog:01-01

A rule with an Apply to class of TGB-Expenses-Work-Reimbursement references a rule PopulateLineItems. The six instances of this rule in the rule cache are as shown below.

Apply to	Ruleset:Version	Availability
TGB-Expenses-Work	Expenses:01-01-05	Withdrawn
TGB-Expenses-Work	Expenses:01-01-03	Available
TGB-Expenses-Work	TGBCatalog:01-01-05	Not Available
TGB-Expenses-Work	TGBCatalog:01-01-03	Blocked
TGB-Expenses	Expenses:01-01-03	Final
TGB-Expenses	TGBCatalog:01-01-05	Available

What rule is chosen by rule resolution?

Accepted Answer

TGB-Expenses-Work PopulateLineItems(TGBCatalog:01-01-03)

Answer

TGB-Expenses-Work PopulateLineItems(TGBCatalog:01-01-05)

Answer

TGB-Expenses-Work PopulateLineItems(Expenses:01-01-05)

Answer

TGB-Expenses PopulateLineItems(TGBCatalog:01-01-05)

Answer

TGB-Expenses PopulateLineItems(Expenses:01-01-03)

Answer

TGB-Expenses-Work PopulateLineItems(Expenses:01-01-03)

Question 4

Multiple teams need to update same application version during a development cycle. Which two actions do you perform so that the teams do not affect each other?

Accepted Answer

Create a new application for each team built on the base application.

Accepted Answer

Create branches in each team’s application.

Answer

Create a new ruleset version of the base application.

Answer

Create a separate production ruleset for each team.

Question 5

A requirement states that the Users role cannot open a purchase request during the Audit stage of the case life cycle. How do you identify the case stage to satisfy the requirement?

Accepted Answer

Configure an Access When record.

Answer

Configure a Privilege record.

Answer

Configure a when record.

Answer

Configure an Access Deny record.

Question 6

You are planning to export your application which includes an unlocked ruleset for delegated rules. What two actions do you perform before you create the archive file?

Accepted Answer

Configure the product rule to include custom and production rulesets for the applications.

Accepted Answer

Configure the product rule to include unlocked ruleset versions.

Answer

Skim the ruleset for delegated rules.

Answer

Unlock all the rulesets in your application.

Question 7

During the development of your application you create operators for testing purposes. You are preparing to migrate the application to another environment. You do not want to include the operators in the archive file. Which two options exclude the operators?

Accepted Answer

In the operators’ step in the Application Packaging Wizard, clear the check boxes next to operator records in the Product Rule, clear the Include associated data items check box.

Accepted Answer

Before you run the Application Packaging Wizard, save the operators to an organization ruleset. Select the Exclude non-versioned rules check box in the Product rule.

Answer

In the operators’ step in the Application Packaging Wizard, clear the check boxes next to operator records in the Product Rule, clear the Include associated data types check box.

Answer

Before you run the Application Packaging Wizard, remove the associated ruleset from the operators’ records.

Question 8

An agent runs every 180 seconds for testing purposes. You have been asked to update the agent so that it runs every Friday at 12.00 A.M. How do you configure this requirement?

Accepted Answer

Change the periodic pattern to Recurring. Open the Parameters dialog and update the schedule.

Answer

Keep the periodic pattern. In the Parameters dialog, update the schedule.

Answer

Keep the recurring pattern and update the Interval value.

Answer

Change the recurring pattern to Periodic and enter the Interval value.

Question 9

An application includes 3 case types. Members of the App:Users access role are not allowed to run reports for one of the case types. Which two options satisfy the requirement?

Accepted Answer

Create an Access Deny record and set the Run reports action to No Access

Accepted Answer

Use the Access Manager and set the Run Reports action for the case type to No Access.

Answer

Apply an Access When record to test for the case type to the Run Reports action in the Access Manager.

Answer

Apply an Access When record to test for the user role to Run Reports action in the
Access Manager.

Question 10

A requirement states that when an assignment is in review, its work status is set to Open- Review. Which two steps do you perform to implement this requirement?

Accepted Answer

Apply the Open-Review status to the appropriate assignments

Accepted Answer

Create a Filed Value rule for the Open-Review status.

Answer

Add a data transform to the process to apply Open-Review status before reaching the
appropriate assignment.

Answer

Add Open-Review as an allowed status on the case type rule.

Question 11

An application retrieves data from an external system of record. The data is used for display purpose only. Select the configuration option for the data page that ensures that the data is always current.

Accepted Answer

Configure the property as Page property and select the Refer to a data page option to point to a data page.

Answer

Configure the property as Page property and select the Manual data option. Use a data transform to populate the page.

Answer

Configure the property as a Single Value property. Use the Automatic reference to class instance option to link to the data.

Answer

Configure the property as Page property and select the Copy data from a data page option to copy the data from the data page.

Question 12

Which specification can you implement using Dynamic Class Referencing (DCF)?

Accepted Answer

Specialize a flow to route assignments to a different workbasket.

Answer

Circumstance a flow to route assignments to a different workbasket.

Answer

Reuse a flow in implementation layer in framework layer.

Answer

Restrict the use of a flow action to specific users.

Question 13

The following example shows the ruleset list for the logged in operator. What is stored in Admin@MyCo ruleset?
      Rulesets
     Admin@MyCo
     Purchasing:01-01
     PurchasingInt:01-01
     MyCo:01-01
     MyCoInt:01-01
     And so on

Accepted Answer

Rules checked out by the operator.

Answer

Preferences for the operator.

Answer

Rules delegated to the operator.

Answer

Rules recently opened by the operator.

Question 14

The primary purpose of the production ruleset is to allow rules to be

Accepted Answer

Updated in a production environment

Answer

Migrated to a production environment

Answer

Tested in a production environment

Answer

Reused in multiple production environments

Question 15

In your purchasing application is a decision table with discount codes. You want to delegate the decision table. In which ruleset do you have the decision table to allow delegation?

Accepted Answer

Production

Answer

Application

Answer

Organization

Answer

Integration

Question 16

An application contains a rule with an Apply to class of TGB-HRApps-Work-Expenses. When updating the application, you want to change the Apply to class of the rule to TGB.
 How do you prevent the application from using the rule in TGB-HRApps-Work-Expenses?

Accepted Answer

Set the availability of rule in TGB-HRApps-Work-Expenses to “Withdrawn”

Answer

Set the availability of the rule in TGB to “Final”

Answer

Set the availability of rule in TGB-HRApps-Work-Expenses to “Blocked”

Answer

Set the availability of rule in TGB-HRApps-Work-Expenses to “Not Available”

Question 17

You have a requirement to populate a list of allowed values sourced from database table. The list of allowed values varies based on the context in which the list is used. Which implementation maximizes reusability?

Accepted Answer

Create a data page sourced with a report definition. Use parameters to specify a filter condition to
retrieve specific results based on context.

Answer

Create a data page sourced with connector. Specializes the data page by class based on
 context.

Answer

Create a data page and report definition for each context. Use parameters to filter the
result of response data transform.

Answer

Create a data page and report definition. Circumstance the report definition based on
the context.

Question 18

A user is processing a case and receives an error message that the system could not find an appropriate rule to use. Select two possible reasons rule resolution failed to find a rule to execute.

Accepted Answer

The availability of the rule chosen by rule resolution is set to “Blocked”

Accepted Answer

The user does not have appropriate privilege to access the rule chosen by rule
resolution.

Answer

The rule chosen by rule resolution is in a ruleset that is not in the application’s ruleset list.

Answer

The context of the rule chosen by rule resolution does not match the context of the
referencing rule.

Question 19

A company sends a standard confirmation email once a case is created. In which layer of enterprise class structure would you apply the email correspondence?

Accepted Answer

Enterprise

Answer

Division

Answer

Implementation

Answer

Unit

Question 20

You want operators in two separate units to be able to perform work routed to either unit. Which configuration supports the requirement?

Accepted Answer

On each operator’s record, associate the operator with the same work group.

Answer

On each operator’s record, associate the operator with both units.

Answer

On the work group record, associate the operators with the work group.

Answer

On each unit record, associate both operators with each unit.

Question 21

A health plan application includes a process for surgical procedure requests. Currently there is an evaluation sub process in which the physician reviews the diagnosis and reviews the diagnosis and enters the recommended procedure and its urgency. The request then advances to a medical director who analyses the feedback and approves the appropriate procedure. The healthcare organization has created a new requirement which states that three physicians can perform the evaluation independently. Only two evaluations are necessary to advance the case to medical director.
 How do you configure the procedure so that the request can continue to be processed if only two of the three physicians approve the order?

Accepted Answer

Use a Some join condition.

Answer

Use a validate rule.

Answer

Use an Any join condition.

Answer

Use a decision table.

Question 22

A health plan application includes a process for surgical procedure requests. Currently there is an evaluation sub process in which the physician reviews the diagnosis and reviews the diagnosis and enters the recommended procedure and its urgency. The request then advances to a medical director who analyses the feedback and approves the appropriate procedure. The healthcare organization has created a new requirement which states that three physicians can perform the evaluation independently. Only two evaluations are necessary to advance the case to medical director.
  In order to allow the three physicians to perform the orders in parallel, how would you configure the process?

Accepted Answer

Add a Split For Each shape, add a list of physicians, and call the evaluation process.

Answer

Add a cascading approval shape that is called by the evaluation subprocess.

Answer

Add a Split-Join shape, add a list of physicians and call the surgical procedure request
process.

Answer

Add a Split Join shape, add a list of physicians, and call the evaluation process.

Question 23

A purchase order case is instantiated as a child case of a Purchase Request case. Select the locking options that allow multiple users to edit the Purchase Order case at the same time.

Accepted Answer

Enable optimistic locking on the Purchase Request case type.

Answer

Enable optimistic locking on the Purchase Order case type.

Answer

Enable default locking on the Purchase Request case type.

Answer

Enable default locking on the Purchase Order case type.

Question 24

Consider the following partial requirement to configure Get Next Work functionality in Pega 7.
All workbaskets with which a user is associated must be checked first. Then all eligible assignments from all workbaskets must be consolidated into a single list before being filtered and sorted.
Which two options in Operator Id record must you select to configure this requirement?

Accepted Answer

Get from workbaskets first.

Accepted Answer

Merge workbaskets.

Answer

Operator is available to receive work.

Answer

Use all workbasket assignments in the user work group.

Question 25

You are creating a report that lists all open Personal Injury cases for an Auto Claim case. What three options do you use to configure the join for this report?

Accepted Answer

Specify a join for Personal Injury class.

Accepted Answer

Create the report in Auto Claim class.

Accepted Answer

Specify the join type to only include matching rows.

Answer

Specify the join type to include all rows in the Personal Injury class.

Answer

Specify a join for the Auto Claim class.

Answer

Create the report in the class group.

Question 26

An application contains two Work- derived classes that all belong to the class group. MyCo- HR-SelfService-Work
 MyCo-HR-SelfService-Work-TimeOff MyCo-HR-SelfService-Work-Expense
If report is created in MyCo-HR-SelfService-Work, what instances will the report return?

Accepted Answer

Instances of MyCo-HR-SelfService-Work-TimeOff and MyCo-HR-SelfService-Work-Expense

Answer

Instances of all Work- derived classes.

Answer

Instances of MyCo-HR-SelfService-Work-TimeOff and MyCo-HR-SelfService-Work-Expense unless they are stored in different database tables.

Answer

Instances of MyCo-HR-SelfService-Work

Question 27

You need to update the navigation menu in a portal. Which tool do you use to identify the rule that contains the menu?

Accepted Answer

Live UI

Answer

The Run Rule dialog.

Answer

The System Management Application(SMA)

Answer

The Tracer

Question 28

A given user interaction takes 5 seconds. You need to investigate why it is taking so long. Which tool do you use to start the investigation?

Accepted Answer

Performance Analyzer (PAL)

Answer

Performance Profiler

Answer

Database Trace

Answer

Pega Log Analyzer (PLA)

Question 29

A duplicate case search contains two weighted conditions in which property value in the current case is compared to the same property value in the existing case. After processing multiple cases that have two matching data values, duplicate case search does not identify duplicate cases.
 What two approaches do you take to diagnose the cause?

Accepted Answer

Verify that total weights of the matching conditions match or exceed threshold.

Accepted Answer

For each weighted condition, verify that you have prefixed the keyword Primary to the
values in the current case.

Answer

For each weighted condition, verify that you have prefixed the keyword Primary to the values in existing case.

Answer

Verify that the case type is instantiated as a temporary case.

Question 30

An organization uses a common process to address account inquiries from customers. Each division maintains its own workbasket for processing account inquiries. Select the configuration that standardises the process while ensuring that users in each division only see assignments appropriate to their division?

Accepted Answer

Use a skill based router to route assignments to users in the appropriate division.

Answer

Use a load balancer router to route assignments to the appropriate division.

Answer

Pass the workbasket name as a property reference using values on a data page.

Answer

Circumstance the flow based on Operator’s division to route assignments.

Question 31

A flow calls a pre-processing data transform to initiate values. There are several flow actions available for the assignment. You want to ensure that values are only initiated once for each flow action. How do you implement a solution?

Accepted Answer

Add logic to data transform to check if values were already initialized.

Answer

Configure data transform as post processing instead of pre-processing.

Answer

Do nothing as pre-processing data transform is called only once per assignment.

Answer

Make sure the flow action does not have the highest likely hood since it will always be invoked.

Question 32

Which two configuration options can you use in a screen flow to ensure that a user performs steps sequentially and not skip ahead?

Accepted Answer

Select the Enable navigation link and Only allow navigation back to this step for each step in the screen flow.

Accepted Answer

Select the PerformScreenFlow harness on start shape in the screen flow.

Answer

Select Save on last step and clear the Only allow navigation back to this step for each step in the screen flow.

Answer

Select the Enable navigation link and Save on last step options for each step in the screen flow.

Question 33

When configuring a screen flow, a single harness is used to define the navigation style. Where is the harness specified?

Accepted Answer

On the start shape of the flow rule.

Answer

On the first assignment shape of the flow rule.

Answer

In the Design properties of the flow rule.

Answer

One the first flow action connector of the flow rule.

Question 34

Consider this business use case: Responses to customer service requests are required within 24 hours of receipt. Due to seasonal fluctuations, response times may be adjusted at the discretion of managers. You a create a Service Level Agreement (SLA) to monitor response times. Which solution allows adjusting the response times on demand?

Accepted Answer

Delegate SLA to the business managers so they can configure seasonal adjustments.

Answer

Define the response times using property values that are circumstanced to account for seasonal adjustments.

Answer

Create multiple circumstances of the SLA to account for seasonal adjustments.

Answer

Plan a release cycle for updating SLA for each of the expected seasonal adjustments.

Question 35

Which two artifacts must you prepare to delegate a rule?

Accepted Answer

An unlocked ruleset that is added to the production ruleset list of the application rule.

Accepted Answer

An Access Group that has access to the ruleset used to organize delegated rules.

Answer

An Access Role that has access to ruleset used to organize delegated rule.

Answer

A locked ruleset that is added to the production ruleset list of the application rule.

Question 36

An insurance application contains a top-level case type named Auto Claim and a Damage Appraisal child case. The company has determined that only one user may open and work on a case at a time. However, users working on Damage Appraisal should not lock out users working on parent case Auto Claim case.

Accepted Answer

Select Do not lock the parent case when child case is open on Damage Appraisal case type.

Accepted Answer

Select Default locking on Auto Claim case type.

Answer

Select Do not lock the parent case when child case is open on Auto Claim case type.

Answer

Select Optimistic locking on Damage Appraisal.

Question 37

In a flow, an integrator shape calls a connector that writes data to a system of record. The system of record is currently not available. How do you simulate the service call invoked from the integrator shape?

Accepted Answer

Create a simulation activity for the connector.

Answer

Leave the flow in draft mode and simulate the integration values in a data transform.

Answer

Simulate the data page using a data transform.

Answer

Configure global resource settings for the connector.

Question 38

You have a requirement to update account information in an external database. Account information is stored in a single table. What are the two necessary steps to read and write data to the database table?

Accepted Answer

Configure activities to read and write data using Obj- methods.

Accepted Answer

Run the External Database Table Class mapping wizard.

Answer

Configure a data page to use SQL connector rules.

Answer

Create a local storage to hold the data.

Question 39

You want to display an error message to the user of the data page fails to retrieve data. The data page is sourced by a REST connector. How do you detect the error?

Accepted Answer

Use a when condition in the response data transform configured for the connector.

Answer

Use a transition condition in the activity invoking the connector.

Answer

Apply the standard pxErrorHandlingTemplate data transform in the response data transform.

Answer

Use the error handler flow in the connector.

Question 40

Which of the following is true about Global Resource Settings?

Accepted Answer

Global Resource Settings allow you to update environmental variables without unlocking rulesets.

Answer

Global Resource Settings allow you to simulate data in an environment for testing purposes.

Answer

Global Resource Settings allow you to execute connectors in parallel to improve performance.

Answer

Global Resource Settings allow you to automate the application migration process.

Question 41

You want to improve the user experience for an application for users on mobile devices. Which three configuration options improve the user’s ability to select and update controls?

Accepted Answer

Use standard Pega controls rather than custom controls.

Accepted Answer

Size clickable items no smaller than 44 x 44 pixels.

Accepted Answer

Configure the display of Date Time field to use a native control.

Answer

Place controls in fixed layout to avoid screen wrapping.

Answer

Use links instead of a menu for navigation.

Question 42

A client wants to replace Pega 7 logo in the Case manager and Case worker portals. Instead of using the company logo, the client wants to use logos for each of the company’s operating subsidiaries – a user in the ABC subsidiary sees logo for ABC, and a user in XYZ subsidiary sees the XYZ logo. How do you add the logos to the application?

Accepted Answer

Upload each logo to a unique binary file record.

Answer

Reference each logo in a skin.

Answer

Upload each logo to a unique section.

Answer

Upload each logo to the portal record.

Question 43

In an application, how do you ensure that the text formatting for menu items matches the text formatting for button labels?

Accepted Answer

Create a mixin for the text formatting and apply the mixin to formats for menus and buttons in the skin.

Answer

Create a format for the text formatting and apply the format to each control.

Answer

Define a style for text formatting and apply the style to the Perform harness.

Answer

Create a skin for the text formatting and inherit the skin in the application skin.

Question 44

You want to allow users to use an application on a mobile device, even if the device is not connected to network. Which configuration option supports this requirement?

Accepted Answer

Configure properties to copy data from data pages.

Answer

Configure UI elements to use native controls on mobile devices.

Answer

Source drop down lists and repeating layouts using data pages.

Answer

Simulate external data sources when application is offline.

Question 45

Consider the following partial requirement to configure Get Next Work functionality in Pega 7.
All workbaskets with which a user is associated must be checked first. Then all eligible assignments from all workbaskets must be consolidated into a single list before being filtered and sorted.
Which two options in Operator Id record must you select to configure this requirement?

Accepted Answer

Use all workbasket assignments in user’s workgroup.

Accepted Answer

Merge workbaskets.

Answer

Operator is available to receive work.

Answer

Get from workbaskets first.

Question 46

You have a requirement to associate users in different units to the same workbasket. How do you implement this requirement?

Accepted Answer

Associate the users to a common Work group. Then associate a workbasket to the common work group.

Answer

Associate the users to a common unit. Then associate a workbasket to the common unit.

Answer

Associate the users to a common workbasket. Then associate a workbasket to the common workbasket.

Answer

Associate the users to a common Work group. Then associate a work group to the appropriate units.

Question 47

Users create insurance coverage request cases to authorize insurance payments. Users enter information that includes the name of the patient, the date of the procedure and the type of the procedure. After entering the information, the user submits the request for a review of the patient’s insurance policy. Because multiple users enter requests, duplicate requests can occur. A request is considered a duplicate if the patient name, procedure type, and procedure date match an existing request. You have been given two requirements: • Ensure that users can identify duplicate requests. • If a case is duplicate, it is not written to database, Otherwise, write the case to the database. Which two options configure the application so that users can identify duplicate requests?

Accepted Answer

Configure weighted condition.

Accepted Answer

Add a duplicate search step to the case lifecycle design.

Answer

Configure a validate rule to validate matching cases.

Answer

Configure a duplicate search decision table and add it to Decision shape.

Question 48

Users create insurance coverage request cases to authorize insurance payments. Users enter information that includes the name of the patient, the date of the procedure and the type of the procedure. After entering the information, the user submits the request for a review of the patient’s insurance policy. Because multiple users enter requests, duplicate requests can occur. A request is considered a duplicate if the patient name, procedure type, and procedure date match an existing request. You have been given two requirements: • Ensure that users can identify duplicate requests. • If a case is duplicate, it is not written to database, Otherwise, write the case to the database. Which two options satisfy the requirement that only nonduplicate requests are written to the database?

Accepted Answer

Add a Persist Case to the case lifecycle design.

Accepted Answer

Configure the case type to instantiate temporary cases.

Answer

Add a Persist Case flow action to case lifecycle design.

Answer

Configure a create case step to instantiate temporary case.

Question 49

Depending upon the purchase request amount, approvals cascade from the user to a loan officer, then to director and finally to a vice president. The loan officer is the user’s manager. The Director is the loan officer’s manager. The vice president is the director’s manager. Which two approaches can you use the configure the cascading approval?

Accepted Answer

Approval based on Reporting structure and when conditions, using each operator’s Reporting To manager to determine the approver(s).

Accepted Answer

Approval based on Authority Matrix, with a Decision Table rule to determine the approver(s).

Answer

Approval based on Authority Matrix, with a Decision Tree rule to determine the approver(s).

Answer

Approval based on Reporting structure, using the Workbasket manager(s) to determine the approver(s).

Question 50

An application contains a case type named Time Off. HR requests a report that returns the ID and name of any employee for whom an open Time Off case does not exist. The ID and Name properties are defined for the class Data-Employee-, and an ID property is also defined for the Time Off class. The ID property in Time Off class points to records in Data-Employee-. Select the approach you use to create this report.

Accepted Answer

Create reports in both classes, and set the TimeOff report as a sub report of the Employee report.

Answer

Create a report in Time Off class, with a class join to the Employee class.

Answer

Create reports in both classes, and set the Employee report as a sub report of the TimeOff report.

Answer

Create a report in Employee class, with a class join to Time Off class.

Question 51

You need a report that presents Operator ID information for every open Time off case. The report will present information from MyCo-HR-SelfService-Work-TimeOff and Data-Admin-Operator-ID classes. Which two options satisfy the requirement?

Accepted Answer

Configure a class join on the report definition to join operator information to each case.

Accepted Answer

Use an association rule to join operator information to each case.

Answer

Specify both classes in Pages & Classes tab of Report Definition rule.

Answer

Add the Operator ID to the Report Definition as a parameter.

Question 52

Which configuration option do you use to delegate a rule?

Accepted Answer

Save a copy of the rule to production ruleset and restrict the access to the ruleset to a specific access group.

Answer

Save a copy of the rule to production ruleset, then set the availability of the original rule to Not Available

Answer

Save a copy of the rule in an application ruleset, restrict the access to the ruleset to a specific access group.

Answer

Save a copy of the rule to production ruleset, then set the availability of the original rule to Withdrawn

Question 53

In the first step in a case type, the user compares data on a form to data on a customer account. If the data matches, the case is resolved. If the data does not match, the user advances the case to update the account. Management only want the record that update an account. What two configuration options do you use to implement this requirement?

Accepted Answer

Apply a when condition to the first step to persist only cases requiring updates.

Accepted Answer

Configure the starting flow to instantiate the case type as a temporary case.

Answer

Configure the first step to instantiate the case type as a temporary case.

Answer

Add a Persist Case shape after the first step.

Question 54

You are configuring a screen flow. Steps three through five must be completed in order. How do you configure the screen flow to meet this requirement?

Accepted Answer

Select the Enable navigation link and Only allow navigating back to this step for both steps four and five.

Answer

Select the Enable navigation link option for the both steps, and Only allow navigating back to this step option for step five.

Answer

Select the Enable navigation link for step four and Only allow navigating back to this step for step five.

Answer

Select the Enable navigation link option for the both steps, and Only allow navigating back to this step for step four.

Question 55

A claims management application sends notification based on the type of damage. Each notification includes a privacy statement, which varies by country. Which implementation satisfies this requirement?

Accepted Answer

Create a multivariate circumstance rule, a circumstance definition, and a circumstance template.

Answer

Create a single property circumstanced rule.

Answer

Create a multivariate circumstanced rule and a when rule.

Answer

Create a single property circumstanced rule and a when rule.

Question 56

You are configuring a duplicate case search logic in a case type. How do you ensure that resolved cases are not evaluated as potential duplicates?

Accepted Answer

Add a must match condition where the work status of potential duplicates does not contain “Resolved”.

Answer

Add a must match condition where the work status of current case does not contain “Resolved”.

Answer

Add a weighted condition that evaluates the work status of current and existing cases where work status equals “Resolved” and has a weight of “0”.

Answer

Add a weighted condition where the work status of potential duplicates does not contain “Resolved”

Question 57

Consider the following user story: As a loan officer, I want to be able to automatically accept the next available application for review so I can complete the next highest priority case. How do you implement this user story?

Accepted Answer

Use a ToWorkbasket router and Pega’s Get Next Work Functionality.

Answer

Use a ToDecisionTree router and the GetNextWorkCriteria decision tree.

Answer

Use a ToLeveledGroup router and Pega’s Get Next Work Functionality.

Answer

Use a ToWorklist router and the GetNextWorkCriteria decision tree.

Question 58

Which two options do you consider when creating a pre-processing data transform?

Accepted Answer

The effect if the flow action is reloaded.

Accepted Answer

The potential reuse of the flow action.

Answer

The security setting for the flow action.

Answer

The timing of the commit for flow action.

Question 59

For which reason do you use a screen flow?

Accepted Answer

To organize separate tasks into a logical sequence of steps so you can control the order in which a single user can complete the tasks.

Answer

To organize separate tasks into a logical sequence of steps so you can control how, when, and by whom each task is completed.

Answer

To enhance the flow rule that routes to multiple users so that there is clear representation of which user on what step.

Answer

To simplify the user interface so that a single screen can show all unresolved assignments for an open case.

Question 60

Users are spending excess time researching duplicate cases to determine whether to process or resolve the cases. Which two options allow you to reduce the number of potential duplicate cases?

Accepted Answer

Increase the weighting threshold.

Accepted Answer

Decrease the weights of weighting conditions.

Answer

Decrease the weighting threshold.

Answer

Increase the weights of weighting conditions.

Question 61

Which two design configurations limit the need for horizontal scrolling when an application used on a mobile device?

Accepted Answer

Set the importance for columns in repeating dynamic layouts.

Accepted Answer

Set the width for layouts in percentages.

Answer

Limit text fields to a width of 200 pixels.

Answer

Use grid layouts rather than repeating dynamic layouts to display tabular data.

Question 62

A client wants to replace Pega 7 logo in the Case manager and Case worker portals. Instead of using the company logo, the client wants to use logos for each of the company’s operating subsidiaries – a user in the ABC subsidiary sees logo for ABC, and a user in XYZ subsidiary sees the XYZ logo. How do you replace the Pega logo with the appropriate logo for each subsidiary?

Accepted Answer

Create a portal header for each division.

Answer

Create a harness for each division.

Answer

Create a skin for each division.

Answer

Create a portal record for each division.

Question 63

A client requests that you add a footer to the Case Manager portal. How do you satisfy this request?

Accepted Answer

Change the section layout on the harness referred on the portal record.

Answer

Configure a navigation record to describe the new portal format.

Answer

Update the Portal type on the portal record.

Answer

Update the portal format in the skin applied to the portal

Question 64

An organization creates two applications with separate branding. You create a skin for the portal branding. Select two options that provide consistent branding for the portal while maintaining the branding for each application.