Quiz
Chapter 9: IP Routing
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (20)
11. What command was used to generate the following output?
Codes: L - local, C - connected, S - static,
[output cut]
10.0.0.0/8 is variably subnetted, 6 subnets, 4 masks
C 10.0.0.0/8 is directly connected, FastEthernet0/3
L 10.0.0.1/32 is directly connected, FastEthernet0/3
C 10.10.0.0/16 is directly connected, FastEthernet0/2
L 10.10.0.1/32 is directly connected, FastEthernet0/2
C 10.10.10.0/24 is directly connected, FastEthernet0/1
L 10.10.10.1/32 is directly connected, FastEthernet0/1
S* 0.0.0.0/0 is directly connected, FastEthernet0/0- Ashow ip route
- Bshow table ip
- Cshow routers route
- Dshow interfaces
2You are viewing the routing table and you see an entry 10.1.1.1/32. What legend code would you expect to see next to this route?
- AC
- BL
- CS
- DD
3Which of the following statements are true regarding the command ip route 172.16.4.0 255.255.255.0 192.168.4.2 ? (Choose two.)
- AThe command is used to establish a static route.
- BThe default administrative distance is used.
- CThe command is used to configure the default route.
- DThe subnet mask for the source address is 255.255.255.0.
- EThe command is used to establish a stub network.
4What destination addresses will be used by HostA to send data to the HTTPS server as shown in the following network? (Choose two.)
- AThe IP address of the switch
- BThe MAC address of the remote switch
- CThe IP address of the HTTPS server
- DThe MAC address of the HTTPS server
- EThe IP address of RouterA's Fa0/0 interface
- FThe MAC address of RouterA's Fa0/0 interface
5Using the output shown, what protocol was used to learn the MAC address for 172.16.10.1?
Interface: 172.16.10.2 --- 0x3
Internet Address Physical Address Type
172.16.10.1 00-15-05-06-31-b0 dynamic- AICMP
- BARP
- CTCP
- DUDP
6Which of the following is called an advanced distance-vector routing protocol?
- AOSPF
- BEIGRP
- CBGP
- DRIP
7When a packet is routed across a network, the_________________ in the packet changes at every hop while the__________ does not.
- AMAC address, IP address
- BIP address, MAC address
- CPort number, IP address
- DIP address, port number
8Which statements are true regarding classless routing protocols? (Choose two.)
- AThe use of discontiguous networks is not allowed.
- BThe use of variable length subnet masks is permitted.
- CRIPv1 is a classless routing protocol.
- DIGRP supports classless routing within the same autonomous system.
- ERIPv2 supports classless routing.
9Which two of the following are true regarding the distance-vector and link-state routing protocols? (Choose two.)
- ALink state sends its complete routing table out of all active interfaces at periodic time intervals.
- BDistance vector sends its complete routing table out of all active interfaces at periodic time intervals.
- CLink state sends updates containing the state of its own links to all routers in the internetwork.
- DDistance vector sends updates containing the state of its own links to all routers in the internetwork.
10When a router looks up the destination in the routing table for every single packet, it is called_____________.
- Adynamic switching
- Bfast switching
- Cprocess switching
- DCisco Express Forwarding
11What type(s) of route is the following? (Choose all that apply.)
S* 0.0.0.0/0 [1/0] via 172.16.10.5- ADefault
- BSubnetted
- CStatic
- DLocal
12A network administrator views the output from the show ip route command. A network that is advertised by both RIP and EIGRP appears in the routing table flagged as an EIGRP route. Why is the RIP route to this network not used in the routing table?
- AEIGRP has a faster update timer.
- BEIGRP has a lower administrative distance.
- CRIP has a higher metric value for that route.
- DThe EIGRP route has fewer hops
- EThe RIP path has a routing loop.
13Which of the following is not an advantage of static routing?
- ALess overhead on the router CPU
- BNo bandwidth usage between routers
- CAdds security
- DRecovers automatically from lost routes
14What metric does RIPv2 use to find the best path to a remote network?
- AHop count
- BMTU
- CCumulative interface delay
- DLoad
- EPath bandwidth value
15The Corporate router receives an IP packet with a source IP address of 192.168.214.20 and a destination address of 192.168.22.3. Looking at the output from the Corp router, what will the router do with this packet?
Corp#sh ip route
[output cut]
R 192.168.215.0 [120/2] via 192.168.20.2, 00:00:23, Serial0/0
R 192.168.115.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0
R 192.168.30.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0
C 192.168.20.0 is directly connected, Serial0/0
C 192.168.214.0 is directly connected, FastEthernet0/0- AThe packet will be discarded.
- BThe packet will be routed out of the S0/0 interface.
- CThe router will broadcast looking for the destination.
- Dhe packet will be routed out of the Fa0/0 interface.
16If your routing table has a static, an RIP, and an EIGRP route to the same network, which route will be used to route packets by default?
- AAny available route
- BRIP route
- CStatic route
- DEIGRP route
- EThey will all load-balance.
17Which of the following is an EGP?
- ARIPv2
- BEIGRP
- CBGP
- DRIP
18Which of the following is an advantage of static routing?
- ALess overhead on the router CPU
- BNo bandwidth usage between routers
- CAdds security
- DRecovers automatically from lost routes
19What command produced the following output?
- Ashow ip route
- Bshow interfaces
- Cshow ip interface brief
- Dshow ip arp
20What does the 150 at the end of the following command mean?
Router(config)#ip route 172.16.3.0 255.255.255.0 192.168.2.4 150- AMetric
- BAdministrative distance
- CHop count
- DCost
Information
- Description
- Certificação Tecnológica CCNA Todd Quiz on Chapter 9: IP Routing, created by Kessi Silva on 03/09/2017.
- Author
- Kessi Silva
- Language
- English
- Views
- 1
- Tags
- Rating
- No ratings yet Rate this quiz