GoConqr has a new look! Let us know what you think.

Sign up free

Quiz

HCNA 2

Jorge Aguilar 65 questions

Take the quiz

This quiz has a time limit, so it opens in the usual player.

Questions in this quiz (65)

  1. 1NAPT allows for multiple internal addresses to be mapped to a single public address. How does NAT distinguish between the different private addresses when mapping to the same public address
    1. AThe source MAC address is used
    2. BThe destination MAC address is used
    3. CThe source port number is used
    4. DThe destination port number is used
  2. 2A web server in a private network is required to provide HTTP services to public users. The network administrator is required to configure NAT on RTA. Which configuration should be used
    1. A[RTA-Seriall/0/l]nat server protocol tcp global 202.10.10.1 www inside 192.168.1.1 8080
    2. BRTA-Serial0/0/l]nat server protocol tcp global 192.168. 1.1 www inside 202.10.10.1 8080
    3. C[RTA-Gigabitethernet0/ 0/ l]nat server protocol tcp global 202.10.10.1 www inside 192.168. 1.1 8080
    4. DRTA- Gigabitethernet0/0/l]nat server protocol tcp global 192.168.1.1 www inside 202.10.10.1 8080
  3. 3The network administrator needs to configure static NAT on RTA, in order to allow Host A to communicate with Host C. Which command is correct
    1. A[RTA-Seriall/0/l]nat outbound 200.1.1.10
    2. B[RTA-Seriall/0/l]nat static global 200.1.1.10 inside 192.168.1.0
    3. C[RTA-Seriall/0/l]nat static global 192.168.1.1 inside 200.1.1.10
    4. D[RTA- Seriall/0/l]nat static global 200.1.1.10 inside 192.168.1.1
  4. 4[RTA-GigabitEthernet0/0/ 0]nat outbound 2000 address-group 1

    Refer to the configuration output. What does the value "2000" refer to
    1. AIt represents the ACL number
    2. BIt represents the NAT number
    3. CIt represents the translated port number
    4. DIt represents the number of bytes that can be translated before the address is returned to the public address pool
  5. 5A configured internal host of a private network wishes to access the internet. What must be configured on the enterprise network' s edge router in order to achieve this
    1. ANAT EasyIP
    2. BDHCP
    3. CBGP
    4. DDefault route
  6. 6Which of the following statements are correct about NAT? (Choose t hree)
    1. ANAT is the abbreviation for "Network Address Translation"
    2. BNAT is used for translation between private and public network address
    3. CWhen hosts inside a private network access the outs ide network, NAT is not required
    4. DNAT provides an effective way to solve the problem of insufficient IP addresses
  7. 7Which of the following technologies can allow a host with IP address 10.0.0.1 to access t he internet
    1. AStatic route
    2. BDynamic route
    3. CRoute import
    4. DNAT
  8. 8Which of the following items can be translated by NAPT
    1. AMAC address + port number
    2. BIP address + port number
    3. COnly MAC address
    4. DOnly IP address
  9. 9Which of the following statements about a designated port working in RIPv2 multicast mode are true
    1. AThe port receives only RIPv2 multicast packets
    2. BThe port does not receive RIPv1 broadcast packets
    3. CThe port does not receive RIPv2 broadcast packets
    4. DThe port receives only RIPv1multicast packets
  10. 10Which of the following statements regarding the router ID in OSPF are incorrect
    1. AThe router IDs of OSPF routers in the same area must be the same, but can be different in different areas
    2. BThe router ID must be the IP address of an OSPF router interface
    3. CThe router ID must be configured manually
    4. DA router running OSPF must have a router ID for it to operate properly

Information

Description
HCNA - R&S Quiz on HCNA 2, created by Jorge Aguilar on 17/09/2018.
Language
English
Views
11
Rating
No ratings yet
Rate this quiz
Rate this quiz

Feedback

What is it about?

What do you think of the new look?

How do you like it?