Ag Mechanics study course for final

1. 1Power tools can be classified by ___.

   1. AA. power source
   2. BB. size or portability
   3. CC. the type of work for which they are built to perform
   4. DD. All of the above
2. 2______ power tools are constructed with relatively heavy bases intended to stabilize the machine during operation.

   1. AA. Staitionary
   2. BB. Portable
   3. CC. Battery-operated
   4. DD. Pneumatic
3. 3true or false? Gasoline or diesel engines are commonly used to power tools and equipment when electricity is not readily available at a job site.

   1. Atrue
   2. Bfalse
4. 4true or false? Two-conductor power cords may be used with double-insulated tools

   1. Atrue
   2. Bfalse
5. 5true or false? Tool kickback may occur when a cutting tool encounters a nail, screw, staple, or naturally occurring knot.

   1. Atrue
   2. Bfalse
6. 6Electrical outlets that are located in damp locations or near sources of water are protected by a _____.

   1. AA. gullet
   2. BB.ground fault
   3. CC. swarf
   4. DD. kickback
7. 7what type of drill bit is this?

   

   1. AA. forstner
   2. BB.step drill
   3. CC. Auger
   4. DD. masonry
8. 8what kind of drill bit is this?

   

   1. AA. auger
   2. BB. High speed steel (hss) twist
   3. CC. masonry
   4. DD.countersink
9. 9what kind of drill bit is this?

   

   1. AA. HSS twist
   2. BB. Auger
   3. CC. step drill
   4. DD. spade or paddle
10. 10what kind of drill bit is this?

    

    1. AA. step drill
    2. BB. forstner
    3. CC. Masonry
    4. DD. HSS twist

11. 11what kind of drill bit is this?

    

    1. AA. Hole saw
    2. BB. forstner
    3. CC. tile and glass
    4. DD. countersink
12. 12what kind of drill bit is this?

    

    1. AA. step drill
    2. BB. forstner
    3. CC. Auger
    4. DD. HSS twist
13. 13what kind of drill bit is this?

    

    1. AA. step drill
    2. BB. masonry
    3. CC. countersink
    4. DD. hole saw
14. 14what kind of drill bit is this?

    

    1. AA. masonry
    2. BB. Hole saw
    3. CC. Auger
    4. DD. tile and glass
15. 15what kind of drill bit is this?

    

    1. AA. tile and glass
    2. BB. hole saw
    3. CC. HSS twist
    4. DD. masonry
16. 16______ is the shavings created and displaced by the drill as a result of drilling into the material.

    1. AA. Gullet
    2. BB. Abrasive
    3. CC. Swarf
    4. DD. Kickback
17. 17______ are handheld tools intended primarily for bring holes in wood, metals, and other common contruction materials.

    1. AA. Circular saws
    2. BB. Portable power drills
    3. CC. Abrasives
    4. DD. Flutes
18. 18Drill bits are secured in the drill using a(n) _______ or bit-holding device.

    1. AA. Clamp
    2. BB.Chuck
    3. CC.Swarf
    4. DD. heavy Wood
19. 19true or false? The drill bit material does not need to be stronger or harder than the work material as long as the bit type is correct.

    1. Atrue
    2. Bfalse
20. 20true or false? the size of a drill bit determines the diameter of the hole that it can create.

    1. Atrue
    2. Bfalse
21. 21what type of drill is this?

    

    1. AA. pneumatic impact wrench
    2. BB. Hammer drill
    3. CC. cordless impact drivers
22. 22what type of drill is this?

    

    1. AA. pneumatic impact wrench
    2. BB. cordless impact drivers
    3. CC. hammer drill
23. 23what type of drill is this?

    

    1. AA. hammer drill
    2. BB. cordless impact drivers
    3. CC. pneumatic impact wrench
24. 24Hammer drills are for drilling holes in ______.

    1. AA. wood
    2. BB.metal
    3. CC. concrete, masonry, rock
    4. DD. copper
25. 25true or false? Impact sockets may be used with standard socket wrench sets, but standard sockets are not engineered to withstand the hammering effect of an impact driver.

    1. Atrue
    2. Bfalse
26. 26Using a drill press ____ is the safest and most stable method to hold materials while drilling.

    1. AA. column
    2. BB.clamp
    3. CC. table
27. 27Uses a horizontally mounted bottle jack that pushes against a lever to lift the saddle arm and platform vertically

    1. AA. Bottle jack
    2. BB.Cribbing
    3. CC. Floor jack
    4. DD. hydraulic press
    5. EE. Jack stand
    6. FF. pipe bender
28. 28Piece of equipment moved into place to support a heavy load

    1. AA. bottle jack
    2. BB. cribbing
    3. CC. floor jack
    4. DD. hydraulic press
    5. EE.jack stand
    6. FF. pipe bender
29. 29Staitionary tool that uses rollers and a mandrel

    1. AA. bottle jack
    2. BB. cribbing
    3. CC. floor jack
    4. DD. hydraulic press
    5. EE. jack stand
    6. FF. pipe bender
30. 30Method if stacking timbers in a crisscross pattern to form a structure used to support heavy equipment

    1. AA. bottle jack
    2. BB. cribbing
    3. CC. floor jack
    4. DD. hydraulic press
    5. EE. jack stand
    6. FF. pipe bender
31. 31Sturdily framed machine that uses a hydraulic cylinder to apply pressure to objects for a variety of purposes

    1. AA. bottle jack
    2. BB. cribbing
    3. CC. floor jack
    4. DD. hydraulic press
    5. EE. jack stand
    6. FF. pipe bender
32. 32Vertical cylinder with a piston or ram that is driven upward by the application of hydraulic force

    1. AA. bottle jack
    2. BB. cribbing
    3. CC. floor jack
    4. DD. hydraulic press
    5. EE. jack stand
    6. FF. pipe bender
33. 33true or false? A sidewinder circular saw uses a gearbox to transfer motor motion to the blade

    1. Atrue
    2. Bfalse
34. 34Crosscutting blades _____.

    1. AA. have more teeth than blades used for ripping
    2. BB. have shallower gullets than blades used for ripping
    3. CC. are used to cut across the grain of lumber
    4. DD. All of the above
35. 35The space between saw teeth that allows that allows for waste removal is known as a ___.

    1. AA. gullet
    2. BB. kerf
    3. CC.swarf
    4. DD. blade set
36. 36cirsular saw blade teeth can be tipped with sharp inserts made from _____ to extend the useful life of a blade

    1. AA. carbide
    2. BB. tungsten
    3. CC. titanium
    4. DD. Portable circular saws
37. 37true or false? table saws are stationary versions of circular saws . They offer cuts with greater precision and have the ability to use special saw blades for dado and rabbet cuts

    1. Atrue
    2. Bfalse
38. 38____ are the most common saws on the job site used for cross cutting lumber.

    1. AA. table saws
    2. BB. band saws
    3. CC. Miter saws
    4. DD. Portable circular saws
39. 39A ______ uses a continous belt-like metal blade that is driven around at least two pulleys to cut material. It may be vertical or horizontal.

    1. AA. table saw
    2. BB. band saw
    3. CC. miter saw
    4. DD. portable circular saw
40. 40This type of saw is commonly used during demolition and other situations where a less precise cut is acceptable. It works by moving a blade in a fast back-and-forth motion.

    1. AA. reciprocating saw
    2. BB. band saw
    3. CC. miter saw
    4. DD. portable circular saw
41. 41true or false? reciprocating saws can only be used to cut metal

    1. Atrue
    2. Bfalse
42. 42_____ are moderately powered handheld saws that use a reciprocating blade action

    1. AA. jig saws
    2. BB. Band saws
    3. CC. Miter saws
    4. DD. Circular saws
43. 43____ are machines that use high-speed rotation and abrasive to smooth and shape metal.

    1. AA. reciprocating saws
    2. BB. Grinders
    3. CC. miter saws
    4. DD. Portable circular saws
44. 44true or false? there is no sand used in sandpaper

    1. Atrue
    2. Bfalse
45. 45the most important factor in selecting an abrasive type is its ____

    1. AA. smoothness
    2. BB. easyness
    3. CC. hardness
    4. DD. roughness

Description

Ag Mechanics Quiz on Ag Mechanics study course for final, created by Andrea Lee on 08/12/2018.

Author

Andrea Lee

Language

English

Views

12

Tags

ag mechanics

Rating

No ratings yet

Rate this quiz

Rate this quiz

More on Power and Electrical Tools