Quiz
CCNA1 - v4 - Chapter 9 exam
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (14)
1In the graphic, Host A has reached 50% completion in sending a 1 KB Ethernet frame to Host D when Host B wishes to transmit its own frame to Host C. What must Host B do?
- AHost B can transmit immediately since it is connected on its own cable segment.
- BHost B must wait to receive a CSMA transmission from the hub, to signal its turn.
- CHost B must send a request signal to Host A by transmitting an interframe gap.
- DHost B must wait until it is certain that Host A has completed sending its frame.
2Ethernet operates at which layers of the OSI model? (Choose two.)
- AData link
- BTransport layer
- CApplication layer
- DPhysical layer
- ESession layer
3Which of the following describe interframe spacing? (Choose two.)
- Athe minimum interval, measured in bit-times, that any station must wait before sending another frame
- Bthe maximum interval, measured in bit-times, that any station must wait before sending another frame
- Cthe 96-bit payload padding inserted into a frame to achieve a legal frame size
- Dthe 96-bit frame padding transmitted between frames to achieve proper synchronization
- Ethe time allowed for slow stations to process a frame and prepare for the next frame
- Fthe maximum interval within which a station must send another frame to avoid being considered unreachable
4What three primary functions does data link layer encapsulation provide? (Choose three.)
- Aaddressing
- Berror detection
- Cframe delimiting
- Dport identification
- Epath determination
- FIP address resolution
5When a collision occurs in a network using CSMA/CD, how do hosts with data to transmit respond after the backoff period has expired?
- AThe hosts return to a listen-before-transmit mode.
- BThe hosts creating the collision have priority to send data.
- CThe hosts creating the collision retransmit the last 16 frames.
- DThe hosts extend their delay period to allow for rapid transmission.
6What are three functions of the upper data link sublayer in the OSI model? (Choose three.)
- Arecognizes streams of bits
- Bidentifies the network layer protocol
- Cmakes the connection with the upper layers
- Didentifies the source and destination applications
- Einsulates network layer protocols from changes in physical equipment
- Fdetermines the source of a transmission when multiple devices are transmitting
7What does the IEEE 802.2 standard represent in Ethernet technologies?
- AMAC sublayer
- BPhysical layer
- CLogical Link
- DControl sublayer
- ENetwork layer
8Why do hosts on an Ethernet segment that experience a collision use a random delay before attempting to transmit a frame?
- AA random delay is used to ensure a collision-free link.
- BA random delay value for each device is assigned by the manufacturer.
- CA standard delay value could not be agreed upon among networking device vendors.
- DA random delay helps prevent the stations from experiencing another collision during the transmission.
9Refer to the exhibit. Which option correctly identifies content that the frame data field may contain?

- Apreamble and stop frame
- Bnetwork layer packet
- Cphysical addressing
- DFCS and SoF
10Host A has an IP address of 172.16.225.93 and a mask of 255.255.248.0. Host A needs to communicate with a new host whose IP is 172.16.231.78. Host A performs the ANDing operation on the destination address. What two things will occur? (Choose two.)
- AHost A will change the destination IP to the IP of the nearest router and forward the packet.
- BHost A will broadcast an ARP request for the MAC of its default gateway.
- CA result of 172.16.225.0 will be obtained.
- DHost A will broadcast an ARP request for the MAC of the destination host.
- EA result of 172.16.224.0 will be obtained.
- FA result of 172.16.225.255 will be obtained.
11Which of the following is a drawback of the CSMA/CD access method?
- ACollisions can decrease network performance.
- BIt is more complex than non-deterministic protocols.
- CDeterministic media access protocols slow network performance.
- DCSMA/CD LAN technologies are only available at slower speeds than other LAN technologies.
12Ethernet operates at which layer of the TCP/IP network model?
- Aapplication
- Bphysical
- Ctransport
- Dinternet
- Edata link
- Fnetwork access
13What is the primary purpose of ARP?
- Atranslate URLs to IP addresses
- Bresolve IPv4 addresses to MAC addresses
- Cprovide dynamic IP configuration to network devices
- Dconvert internal private addresses to external public addresses
14Refer to the exhibit. The switch and workstation are administratively configured for full-duplex operation. Which statement accurately reflects the operation of this link?

- ANo collisions will occur on this link.
- BOnly one of the devices can transmit at a time.
- CThe switch will have priority for transmitting data.
- DThe devices will default back to half duplex if excessive collisions occur.
Information
- Description
- Quiz on CCNA1 - v4 - Chapter 9 exam, created by groche on 08/12/2014.
- Author
- groche
- Language
- English
- Views
- 5
- Rating
- No ratings yet Rate this quiz