Quiz
IS 302 Business Data Communications Module 4
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (113)
1Wi-Fi is a term used by the _____ .
- Aa. IEEE
- Bb. both A and B
- Cc. neither A nor B
- Dd. Wi-Fi Alliance
2A group of devices on a desk that communicate wirelessly is called a _____ .
- Aa. PAN
- Bb. WAN
- Cc. LAN
- Dd. MAN
3Companies prefer the 5 Ghz band because there is _____ than in the 2.4 Ghz band.
- Aa. both A and B
- Bb. less absorptive attenuation
- Cc. neither A nor B
- Dd. more bandwidth
4Wireless network standards operate at _____ .
- Aa. the Internet layer
- Bb. neither A nor B
- Cc. both A and B
- Dd. the data link layer
5When two devices communicate using NFC, how close must they be?
- Aa. up to 5 feet
- Bb. up to 50 feet
- Cc. a few inches
- Dd. up to 10 feet
6An access point can transmit to more than one wireless client at a time with _____ .
- Aa. MIMO
- Bb. bonding
- Cc. CSMC/CA+ACK
- Dd. Multiuser MIMO
7Wi-Fi operates in the 2.4 Ghz and 5 Ghz _____ .
- Aa. channels
- Bb. spectrums
- Cc. service bands
- Dd. frequencies
8Wi-Fi normally uses a(n) _____ .
- Aa. dish antenna
- Bb. omnidirectional antenna
- Cc. neither A nor B
- Dd. both A and B
9The downside of unlicensed bands is potential _____ .
- Aa. interference from others
- Bb. loss of flexibility
- Cc. speed loss
- Dd. less-developed standards
10Bluetooth uses _____ operation.
- Aa. one-to-all
- Bb. point-to-multipoint
- Cc. all-to-all
- Dd. one-to-one
11Most wireless systems operate in the _____ range.
- Aa. MHz
- Bb. kHz
- Cc. hz
- Dd. GHz
12Frequency is measured in terms of _____ .
- Aa. microseconds
- Bb. microns
- Cc. nanometers
- Dd. hertz
13Nearly all public Wi-Fi hotspots encrypt your transmissions.
- ATrue
- BFalse
14Wi-Fi standards come from the _____ Working Group.
- Aa. 802.3
- Bb. 802.1
- Cc. 802.11
- Dd. 802.1X
15Compared to wired transmission, propagation problems in radio transmission are _____ .
- Aa. about as bad
- Bb. worse
- Cc. better
16The Wi-Fi Alliance calls 802.11i _____ .
- Aa. WPA2
- Bb. WPA
- Cc. WEP
- Dd. none of the above
17Which updated security standard does Wi-Fi 6 feature?
- Aa. RC4 Stream Cipher
- Bb. WEP
- Cc. WPA 3
- Dd. WPA 4
18Which of the following is not an advantage of Wi-Fi 6?
- Aa. Productivity
- Bb. Mobility
- Cc. Ease of use
- Dd. Creativity
19Which type of attacks does WPA3 protect devices against?
- Aa. Social Engineering
- Bb. Trojan-horse
- Cc. Brute-Force attack
- Dd. Mars Attack
20What Encryption is used in WPA 3?
- Aa. 64-bit encryption
- Bb. 192-bit encryption
- Cc. 256-bit encryption
- Dd. 128-bit encryption
21802.11i 802.1X initial authentication mode was created for _____ .
- Aa. residences with less than eight access points
- Bb. residences with a single access point
- Cc. corporations with multiple access points
- Dd. corporations with less than either access points
22To handle multiple conversations in 802.11 transmission, you normally use multiple _____ .
- Aa. channels
- Bb. frequencies
- Cc. service bands
- Dd. wires
23In a Wi-Fi LAN, wireless hosts generally send frames directly to one another.
- ATrue
- BFalse
24Wireless network standards are _____ standards
- Aa. OSI
- Bb. TCP/IP
- Cc. both A and B
25We use the terms Wi-Fi and ______ interchangeably in this book.
- Aa. 802.1
- Bb. 802.3
- Cc. 802.11
- Dd. 802.1X
26Wireless access points typically link wireless clients to _____ .
- Aa. wireless servers
- Bb. servers on the wired network
- Cc. both A and B
27Wireless radio transmission speed is usually measured in terms of _____ .
- Aa. wavelength
- Bb. frequency
- Cc. amplitude
- Dd. wetness
28Radio transmission is measured in terms of _____ .
- Aa. bytes per second
- Bb. wavelength
- Cc. frequency
- Dd. bits per second
29The other wireless device is far away in a known direction. It would be better to use _____ .
- Aa. an omnidirectional antenna
- Bb. a dish antenna
- Cc. neither A nor B
30A cellular telephone uses a(n) _____ .
- Aa. omnidirectional antenna
- Bb. dish antenna
- Cc. both A and B
- Dd. neither A nor B
31At 10 meters, a signal has a strength of 100 mW. About how strong will it be at 40 meters?
- Aa. about 0.5 mW
- Bb. about 5 mW
- Cc. about 25 mW
- Dd. about 6 mW
32What propagation problem is especially bad in moist air?
- Aa. absorptive attenuation
- Bb. electromagnetic interference
- Cc. multipath interference
- Dd. inverse square law attenuation
33What propagation problem becomes worse as there is a large and dense object between sender and receiver?
- Aa. multipath interference
- Bb. shadow zones or dead zones
- Cc. both A and B
- Dd. neither A nor B
34The most serious problem with wireless transmission in WLANs is _____ .
- Aa. inverse square law attenuation
- Bb. absorptive attenuation
- Cc. shadow zones
- Dd. multipath interference
35What propagation problem becomes worse as frequency increases?
- Aa. inverse square law attenuation
- Bb. electromagnetic interference
- Cc. both A and B
- Dd. neither A nor B
36The frequency spectrum extends _____ .
- Aa. into the gigahertz range
- Bb. into the visible light range
- Cc. into the ultraviolet range
- Dd. to infinity
37Signals in a transmission usually _____ .
- Aa. travel at a single frequency
- Bb. spread over a range of frequencies
- Cc. spread over the entire frequency distribution
- Dd. spread over the entire service band
38A channel extends from 55 MHz to 60 MHz. Its bandwidth is _____ .
- Aa. 60 MHz
- Bb. 55 MHz
- Cc. 65 MHz
- Dd. none of the above
39To transmit very rapidly in RADIO, you need _____ .
- Aa. single-frequency transmission
- Bb. single-mode transmission
- Cc. wide bandwidth
- Dd. narrow bandwidth
40Channels with wide bandwidths are called _____ .
- Aa. multimode
- Bb. full-duplex
- Cc. broadband
- Dd. parallel
41To transmit data very rapidly, you would want a ____ channel.
- Aa. narrowband
- Bb. broadband
- Cc. single-frequency band
- Dd. none of the above
42802.11 standards are being developed to work in the _____ .
- Aa. 2.4 GHz
- Bb. 5 GHz
- Cc. both A and B
- Dd. neither A nor B
43The 2.4 Ghz band supports _____ possible non-overlapping 20 MHz channel(s).
- Aa. 1
- Bb. 3
- Cc. 7
- Dd. 11
44The 5 GHz band usually supports about _____ non-overlapping 20 MHz channel(s).
- Aa. 1
- Bb. 3
- Cc. 7
- Dd. 12
45Spread spectrum transmission is used in WLANs because _____ .
- Aa. it is required by regulators
- Bb. it offers strong security
- Cc. both A and B
- Dd. neither A nor B
46Spread spectrum transmission is used in WLANs for _____ .
- Aa. higher transmission speed
- Bb. more reliable transmission
- Cc. greater security
- Dd. more efficient transmission
47WLANs normally use _____ .
- Aa. licensed bands
- Bb. unlicensed bands
- Cc. both A and B
- Dd. neither A nor B
48In unlicensed bands, _____ .
- Aa. you can use radios wherever you please
- Bb. you can prevent nearby businesses from setting up access points in the same channel
- Cc. both A and B
- Dd. neither A nor B
49A channel has more bandwidth than is necessary given data transmission speeds requirements in ______ transmission.
- Aa. normal radio
- Bb. reliable commercial
- Cc. spread spectrum
- Dd. licensed
50Which of the following uses OFDM?
- Aa. 802.11ac
- Bb. 802.11n
- Cc. both A and B
- Dd. neither A nor B
51Access points take _____ from wireless devices and send them on to devices on the wired LAN. They also do the converse.
- Aa. packets
- Bb. frames
- Cc. both A and B
- Dd. neither A nor B
52A wireless host sends a packet to a server on the company's wired Ethernet LAN via an access point. How many frames will be involved in this one-way transmission?
- Aa. 1
- Bb. 2
- Cc. 4
- Dd. There will be one frame for each switch along the way.
53A single access point and the set of hosts it serves is called a(n) _____ .
- Aa. BSS
- Bb. BSSID
- Cc. ESS
- Dd. none of the above
54_____ have SSIDs.
- Aa. Wireless clients
- Bb. Wireless access points
- Cc. both A and B
- Dd. neither A nor B
55To use an access point, you need to know its _____ .
- Aa. SSID
- Bb. BSSID
- Cc. ESSID
- Dd. Wi-Fi ID
56To connect to an access point, you must know its _____ .
- Aa. SSID
- Bb. EUI-48 address
- Cc. IP address
- Dd. Wi-Fi ID
57An extended service set (ESS) is a group of BSSs that _____ .
- Aa. are connected to the same distribution system
- Bb. have the same SSID
- Cc. both A and B
- Dd. neither A nor B
58In an extended service set, each access point _____ .
- Aa. must have the same SSID
- Bb. must have different SSIDs
- Cc. must have coordinated SSIDs
- Dd. none of the above
59Access points in the same ESS communicate via _____ .
- Aa. wireless transmission
- Bb. the distribution system
- Cc. a master access point
- Dd. routers
60The standard for roaming among access points is _____ .
- Aa. 802.11r
- Bb. 802.11s
- Cc. 802.11W
- Dd. the wireless handoff protocol
61What happens if two nearby access points use the same channel?
- Aa. They will interfere with each other.
- Bb. They will be bonded for joint operation automatically.
- Cc. They will be bonded for joint operation automatically if they are on the same ESS.
- Dd. They will be bonded for joint operation automatically if they have the same SSID.
62There is an access point that serves eight wireless hosts. On how many channels will these devices transmit and receive during the course of an hour or two?
- Aa. 1
- Bb. 2
- Cc. 8
- Dd. 9
63_____ is a technique for preventing two wireless stations from transmitting at the same time and therefore interfering with each other.
- Aa. Creating extended service sets
- Bb. Roaming
- Cc. The distribution system
- Dd. Media Access Control
64Media access control governs transmission by _____ .
- Aa. access points
- Bb. wireless hosts
- Cc. both A and B
- Dd. neither A nor B
65In CSMA/CD+ACK, when a wireless NIC wishes to transmit, it listens for traffic. If there is traffic, it waits. When the traffic stops, it may transmit immediately.
- Aa. always true
- Bb. sometimes true
- Cc. always false
66CSMA/CD+ACK is _____ .
- Aa. unreliable
- Bb. reliable
- Cc. semireliable
67In _____ , when a wireless host wishes to send, it first sends a message to the wireless access point asking for permission to send. When the access point sends back a response, the host sending the original message may transmit. All other hosts must wait.
- Aa. CSMA/CA+ASK
- Bb. CSMA/CA
- Cc. CSMA/CD
- Dd. RTS/CTS
68The 802.11 standard has two mechanisms for media access control. One of two mechanisms is mandatory it is _____ .
- Aa. MAC
- Bb. CSMA/CA+ACK
- Cc. RTS/CTS
- Dd. CSMA/CD
69CSMA/CA+ACK
- Aa. mandatory
- Bb. optional
- Cc. not important
- Dd. efficient
70Which of the following is more efficient and faster?
- Aa. CSMA/CA+ACK
- Bb. RTS/CTS
- Cc. Both are about equally efficient and fast.
71Which of the following is the newest Wi-Fi standard?
- Aa. 802.11ac
- Bb. 802.11g
- Cc. 802.11n
- Dd. 802.11b
72Today, Wi-Fi sales are dominated by _____ .
- Aa. 802.11a
- Bb. 802.11g
- Cc. 802.11n
- Dd. 802.11ac
73Wider channel bandwidth _____ .
- Aa. increases transmission speed
- Bb. allows more channels to be used in a service band
- Cc. both A and B
- Dd. neither A nor B
74Which of the following only operates in the 5 GHz band?
- Aa. 802.11b
- Bb. 802.11ac
- Cc. 802.11g
- Dd. 802.11n
75In 802.11g, channel bandwidth usually is _____ .
- Aa. 20 GHz
- Bb. 40 GHz
- Cc. 20 MHz
- Dd. 40 MHz
76In the 5 GHz band, how many channels can you have with 802.11ac with 80 GHz channels?
- Aa. 1
- Bb. 6
- Cc. 12
- Dd. 24
77MIMO _____ .
- Aa. bonds two or more channels for higher speed
- Bb. is used in all forms of 802.11
- Cc. uses a single spatial stream but multiple signals
- Dd. transmits multiple signals in the same channel
78MIMO _____ .
- Aa. increases throughput
- Bb. lowers propagation
- Cc. both A and B
- Dd. neither A nor B
79Beamforming can allow an access point to _____ .
- Aa. direct power to individual clients
- Bb. send signals to two different clients at the same time
- Cc. both A and B
- Dd. neither A nor B
80Radio has more reliable transmission than UTP.
- ATrue
- BFalse
81Attenuation with distance is faster with _____ .
- Aa. UTP
- Bb. radio transmission
- Cc. both A and B
- Dd. neither A nor B
82If the signal strength at 20 meters is 90 mW, the signal strength at 60 meters would be 10 mW.
- ATrue
- BFalse
83The most serious problem with wireless transmission is WLANs is _____ .
- Aa. inverse square law attenuation
- Bb. absorptive attenuation
- Cc. shadow zones
- Dd. multipath interference
84The terms channel and service band mean roughly the same thing.
- ATrue
- BFalse
85A channel extends from 55 MHz to 60 MHz. Its bandwidth is _____ .
- Aa. 60 MHz
- Bb. 55 MHz
- Cc. 65 MHz
- Dd. none of the above
86Networks that are fast are often called broadband whether or not they use radio channels.
- ATrue
- BFalse
87The frequency range from 500 megahertz to 10 gigahertz is called the _____ .
- Aa. frequency spectrum
- Bb. commercial mobile service band
- Cc. unlicensed band
- Dd. golden zone
88If a radio transmission is easily blocked by obstacles, then you need to maintain _____ .
- Aa. a clear line of sight
- Bb. spread spectrum transmission interference
- Cc. broadband transmission
- Dd. deep transmission
89In unlicensed bands, _____ .
- Aa. you can use radios wherever you please
- Bb. you can prevent nearby businesses from setting up access points in the same channel
- Cc. both A and B
- Dd. neither A nor B
90In 802.11, channel bandwidth usually is _____ .
- Aa. 20 GHz
- Bb. 40 GHz
- Cc. 20 MHz
- Dd. 40 MHz
91Which unlicensed band is defined the same way in most countries around the world?
- Aa. 2.4 GHz
- Bb. 5 GHz
- Cc. both A and B
- Dd. neither A nor B
92The 2.4 GHz band supports _____ nonoverlapping 20 MHz channel(s).
- Aa. 1
- Bb. 3
- Cc. 7
- Dd. 11
93The 5 GHz band supports about _____ nonoverlapping 20 MHz channel(s).
- Aa. 1
- Bb. 3
- Cc. 6
- Dd. 12
94Spread spectrum transmission is used in commercial WLANs for security reasons.
- ATrue
- BFalse
95When a WLAN is in use, the distribution system is the _____ .
- Aa. collection of access points
- Bb. Ethernet network
- Cc. radio transmitter in an access point
- Dd. radio transmitter in the access point controller
96Access points take frames from wireless devices and send these frames on to devices on the wired LAN.
- ATrue
- BFalse
97A wireless host sends a packet to a server on the company's wired Ethernet LAN via an access point. How many frames will be involved in this one-way transmission?
- Aa. 1
- Bb. 2
- Cc. 4
- Dd. There will be one frame for each switch along the way.
98When a host moves form one wireless access point to another in a WLAN, this is _____ .
- Aa. a handoff
- Bb. roaming
- Cc. both A and B
- Dd. neither A nor B
99In 802.11 WLANs, the terms handoff and roaming mean the same thing.
- ATrue
- BFalse
100An extended service set (ESS) is a group of BSSs that _____ .
- Aa. are connected to the same distribution system
- Bb. have the same SSID
- Cc. both A and B
- Dd. neither A nor B
101_____ is a technique for preventing two wireless stations from transmitting at the same time and therefore interfering with each other.
- Aa. creating extended service sets
- Bb. roaming
- Cc. the distribution system
- Dd. media access control
102An access point and a host it serves can transmit to each other simultaneously.
- ATrue
- BFalse
103When a wireless NIC wishes to transmit, it listens for traffic. If there is traffic, it waits. If there is no traffic, it may transmit.
- Aa. true
- Bb. sometimes true
- Cc. false
104When a wireless NIC using CSMA/CD receives a frame correctly , it immediately sends back a reply without listening for traffic.
- ATrue
- BFalse
105CSMA/CA+ACK is _____ .
- Aa. efficient
- Bb. inefficient
106CSMA/CA+ACK usually is _____ .
- Aa. required
- Bb. optional
107Which of the following brings gigabit speeds to clients?
- Aa. 802.11ac
- Bb. 802.11g
- Cc. 802.11n
- Dd. none of the above
108For wireless backup, which of the following is adequate?
- Aa. 802.11ac
- Bb. 802.11
- Cc. 802.11n
- Dd. all of the above
109For which of the following is 100 meters a typical service distance?
- Aa. 802.11g
- Bb. 802.11n
- Cc. both A and B
- Dd. neither A nor B
110In the 60 GHz service band, _____ .
- Aa. signals travel farther
- Bb. channel bandwidth can be very wide
- Cc. both A and B
- Dd. neither A nor B
111In 802.11 networks, the speed I receive on my portable devices is a(n) _____ .
- Aa. aggregate throughput
- Bb. individual throughput
- Cc. rated speed
- Dd. none of the above
112The 802.11 standard for mesh networking is _____ .
- Aa. 802.11m
- Bb. 802.11r
- Cc. 802.11ac
- Dd. none of the above
113Mesh networking in 802.11 is likely to use _____ .
- Aa. only wireless devices
- Bb. wireless devices and the site's wired LAN
- Cc. both A and B
Information
- Description
- Chapters 6 & 7
- Author
- Jamey Cendana
- Language
- English
- Views
- 4
- Tags
- Rating
- No ratings yet Rate this quiz