Quiz
Qwertyasdfghjk
This quiz has question types that open in the usual player.
Questions in this quiz (48)
1[blank_start]Straight fluted drill[blank_end] is the type of drill bit used for drilling soft metals.
- AStraight fluted drill
2[blank_start]Flat drill[blank_end] is the type of drill bit used for drilling in the absence of the twist drill.
- AFlat drill
3[blank_start]Drill shank[blank_end] is the adapting part of the drill bit.
- ADrill shank
4[blank_start]Oil tube drill[blank_end] is the so-called self-lubricating drill bit.
- AOil tube drill
5[blank_start]High carbon steel[blank_end] is the material of drill bit used for general drilling operation.
- AHigh carbon steel
6[blank_start]Drip[blank_end] is the tool used in removing the tapered shank of the drill bit from the sleeve.
- ADrip
7[blank_start]59-60[blank_end] is the angle of the drill bit point used in general drilling operation.
- A59-60
8[blank_start]Lip[blank_end] is the part of the drill bit that serves as the cutting edge.
- ALip
9[blank_start]Welding[blank_end] is the method of joining two pieces of metal by heating, wherein the edges of the metals melt with filler metal.
- AWelding
10[blank_start]3/32[blank_end] is the smallest diameter of an electrode.
- A3/32
11[blank_start]Adequate ventilation[blank_end] is the way of avoiding fumes in arc welding.
- AAdequate ventilation
12[blank_start]Electrode motion[blank_end] is used to secure fusion in arc welding.
- AElectrode motion
13[blank_start]3xdiameter of electrode[blank_end] is the width of the welding bead in arc welding.
- A3xdiameter of electrode
14[blank_start]Slags[blank_end] is on the top of the welding bead right after welding.
- ASlags
15[blank_start]2/3[blank_end] is the amount of heat liberated on the base metal when we use DCSP.
- A2/3
16[blank_start]Direct Current Reverse Polarity[blank_end] is the polarity in DC welding used when metal to be welded has a low melting point.
- ADirect Current Reverse Polarity
17[blank_start]DCRP[blank_end] is the polarity in DC welding used when a high rate of metal deposit is required.
- ADCRP
18[blank_start]2/3[blank_end] is the amount of heat liberated to the electrode when we use DCRP current.
- A2/3
19[blank_start]Bare electrode[blank_end] is called an electrode without coating.
- ABare electrode
20[blank_start]Dirty/old[blank_end] is the kind of metal welded with thick coated electrode.
- ADirty/old
21[blank_start]Column[blank_end] is the part of drill press which serves as the support of the drill press head.
- AColumn
22[blank_start]Tap[blank_end] is the multi-toothed cutting tool used in cutting internal threads.
- ATap
23[blank_start]Spot facing[blank_end] is a drill press operation that clears the top surface of an existing hole.
- ASpot facing
24[blank_start]Spindle adjusting lever[blank_end] is the part of the drill press used to adjust the spindle.
- ASpindle adjusting lever
25[blank_start]Work table[blank_end] serves as the support of the work on the drill press.
- AWork table
26[blank_start]Supply[blank_end] is anything that is consumable and cannot be reused for the same purpose.
- ASupply
27[blank_start]DCSP[blank_end] is the polarity circuit used when welding high melting point metal.
- ADCSP
28[blank_start]DCSP[blank_end] is the polarity circuit used when narrow bead of weld is desired.
- ADCSP
29[blank_start]Tin snip[blank_end] is a hand tool used for cutting thin sheet metal.
- ATin snip
30[blank_start]Gang drill press[blank_end] is a type of a drill press with several drill press heads.
- AGang drill press
31[blank_start]Three fluted drill[blank_end] is a type of drill bit used for drilling large sizes of holes.
- AThree fluted drill
32[blank_start]Flute[blank_end] is the groove on the drill that carries out the chips.
- AFlute
33[blank_start]Annealing[blank_end] is a heat-treatment process wherein the structure of the steel is softened.
- AAnnealing
34[blank_start]Margin/channel[blank_end] is part of a drill bit which is the narrow section between the flutes.
- AMargin/channel
35[blank_start]Shear cutter[blank_end] is equipment used for cutting sheet metal.
- AShear cutter
36[blank_start]Milling machine[blank_end] is equipment used for cutting flat surfaces through the use of a tool moving on a reciprocating motion.
- AMilling machine
37[blank_start]Brad nail[blank_end] is a form of nail used as a finishing nail.
- ABrad nail
38[blank_start]Claw hammer[blank_end] is a hand tool used for driving and withdrawing nails.
- AClaw hammer
39[blank_start]Cast iron[blank_end] becomes brittle when heat spread throughout the structure during welding.
- ACast iron
40[blank_start]Annealing[blank_end] is done on welded base metal to relieve stresses.
- AAnnealing
41[blank_start]Pre-heat the structure[blank_end] until it becomes cherry red is done in cast-iron welding for good results in welding.
- APre-heat the structure
42[blank_start]Main motor[blank_end] is part of a drill press that acts as a source of all mechanical power which drives the drill press mechanism.
- AMain motor
43[blank_start]Shaper machine[blank_end] is equipment used for cutting irregular shapes in which cutting saw is mounted in tandem.
- AShaper machine
44[blank_start]Sand paper[blank_end] is a supply used in smoothening the surfaces of wooden material.
- ASand paper
45[blank_start]Emery cloth[blank_end] is a supply used in smoothening the surfaces of a metallic material.
- AEmery cloth
46[blank_start]Slotted hole[blank_end] is the hole on the work surface that serves as the seat of the fillister head screw.
- ASlotted hole
47[blank_start]90[blank_end] is the visual angle of the electrode from the base metal during welding operation.
- A90
48[blank_start]Vise grip[blank_end] is a hand tool used for holding pieces of metal with a grip.
- AVise grip
Information
- Description
- Quiz on Workshop, created by Jervis Masangkay on 10/08/2016.
- Author
- Jervis Masangkay
- Language
- English
- Views
- 1
- Rating
- No ratings yet Rate this quiz