Quiz
Robotics
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (43)
1What is the purpose of the Photo Resistor?
- Ato identity the pressure
- Bto identity the humidity
- Cto identity the vibration
- Dto identity the changes of light
2Total allowable error can be explained by
- Aaccuracy
- Btolerance
- Cabsolute error
- Drelative error
3Which formula can you use to convert voltage to temperature?
- ATemp in C=(V - 0.5) * 100
- BTemp in C = (V - 5000) / 10
- CTemp in C =(V - 500) * 10
- DNone of the given
4Which of the given devices are the internal state sensors?
- AAll of the given
- BPotentiometer
- COptical encoder
- DAccelerometer
5How to find the measure of how close the output of the instrument to the true value?
- AFind the Tolerance
- BFind the Absolute Accuracy
- CNone of the given
- DFind the Relative Error
6What is sensor fusion?
- ATo make observations to work in dynamics environment
- BNone of given
- CIncrease of reliability of information
- DCombination of multiple sensors to make better estimation
7What is the range of photo resistor?
- A500 Ohm to 50 kOhm
- B500 V to 50 kV
- C50 V to 500 kV
- D50 Ohm to 500 kOhm
8What is the output from the temperature sensor?
- APressure output of the motor
- B10 millivolts peer degree centigrade
- CTemperature in centigrade
- DRobot joint temperature
9Which of the following is a sensor that measures the movement of an object?
- AAction sensor
- BTouch sensor
- CPressure sensor
- DMotion sensor
10Which of the sensors given below is used to determine the device orientation?
- AAll of the given
- BMagnetic field sensor
- CAccelerometer
- DGravity sensor
11Internal state sensor ae used for measuring _______ of the effector
- APosition & Velocity
- BVelocity & Acceleration
- CPosition, Velocity & Acceleration
- DPosition
12Which of the following sensors determine the relationship of the robot and its environment and the objects handled by it
- AExternal State sensors
- BNone of the above
- CInternal state sensors
- DInternal State sensors and External State sensors
13When low value of light sensor will occur
- AThere is only high value
- BWhen it is light enough 100%
- CI do not know what is light sensor
- DWhen it is darkness
14Define is that statement True or False "Arduino cannot directly sense the voltage, so we set up the voltage divider"
- ATrue
- BFalse
15How does Kalman filter work?
- ANone of the given
- BIt uses a series of measurements observed over time, and produces estimates of unknown variables
- CIt uses single measurement observed over time, and produces estimates of unknown variables
- DIt uses a single measurement observed in one time, and produces estimates of unknown variables
16Which sensor is included inside the servo motor?
- ANone of the given
- BPotentiometer
- COptical encoder
- DLight sensor
17What is the name for information sent from robot sensors to robot controllers?
- Afeedback
- Btemperature
- Cpressure
- Dsignal
18Name two basic classes of sensory devices
- ADecoder state sensors/encode state sensors
- BNone of the given
- COut state sensor/in state sensor
- DInternal state sensors/external state sensors
19What is Internal Measurement Unit (IMU)
- ADevice that contains gyroscopes combined with accelerometers and compasses
- BAll of the given
- CDevice that measures a body’s specific force and angular rate
- DNone of the given
20Define is that statement True or False - "The accelerometer is relatively stable, but it is very sensitive to vibration and mechanical noise"
- ATrue
- BFalse
21Capturing the image can be done by
- Ainterpretation
- Bdescription
- Csensing
- Dpreprocessing
22Pattern recognition is conversion from
- AImage to Image
- BImage to Data
- CData to Image
- DData to Interpretation
23____________deals with the computation of features (e.g., size, shape) suitable for differentiating one type of object from another:
- Apreprocessing
- Brecognition
- Cinterpretation
- Ddescription
24___________ assigns meaning to an ensemble of recognized objects:
- Apreprocessing
- Brecognition
- Csegmentation
- Dinterpretation
25Image analysis is conversion from
- AImage to Image
- BImage to Data
- CData to Image
- DData to Interpretation
26Robot vision has to be
- AComputationally fast, Low-cost and Robust
- BComputationally fast, Processing and Robust
- CPerfect, Low cost and Robust
- DComputationally fast, Low cost and systematic
27Name two different methods which are commonly used for modelling the camera
- Athe pinhole method and the 2D planes model
- Bthe one planer method and the two planes model
- Cthe pinhole method and the two planes model
- Dthe picture method and the two planes model
28Manipulator trajectory planning has two main issues
- ASatisfies kinematics constraints and satisfies manipulator dynamics constraints
- BSatisfies path constraints and satisfies manipulator dynamics constraints
- CSatisfies motion constraints and satisfies manipulator dynamics constraints
- DSatisfies path constraints and satisfies manipulator kinematics constraints
29An image has 1 bit per pixel. What is the grey value
- A2 grey values
- B8 grey values
- C256 grey values
- D512 grey values
30___________is the process that identifies the objects
- ASegmentation
- BRecognition
- CPreprocessing
- DSensing
31The illumination technique that reduce complexity of the resulting image, can be classified into basic categories
- AHomogeneous-lighting, back-lighting, structure lighting and directional lighting
- BDiffuse-lighting, back-lighting, structure-lighting and directional-lighting
- CComposite-lighting, back-lighting, structure-lighting and directional-lighting
- DDiffuse-lighting, sun- lighting, structure-lighting and reflected-lighting
32Name the four positions for each arm motion in a joint-interpolated motion trajectory
- AInitial, set-down, lift-off and complete position
- BInitial, lift-off, set-down and final position
- CInitial, set-down, lift-off and final position
- DInitial, lift-off, set-down and set-down position
33Find the resulting Image, if the original Image is [2 3 0; 1 2 0; 2 -1 0] and the convolution mask is [0 1 0;1 -4 1; 0 1 0]
- A[-4 -8 0; 2 -5 2; 8 -8 -1]
- B[-4 -8 3; 2 -5 2; -8 8 -1]
- C[-4 -4 3; 2 -5 2; 8 8 -1]
- D[4 8 0; 2 -5 2; -8 8 1]
34Name two coordinate systems which involved in camera modeling
- ACartesian coordinate and space coordinate
- BCartesian coordinate and camera coordinate
- C3D coordinate and 2D coordinate
- DImage coordinate and camera coordinate
35Graphics is conversion from
- AImage to Image
- BImage to Data
- CData to Image
- DData to interpretation
36There are two common approaches are used to plan manipulator trajectories
- AJoint trajectories and Cartesian path trajectory
- BControl trajectory and Cartesian path trajectory
- CJoint trajectory and kinematical trajectory
- DJoint trajectory and Dynamic path trajectory
37What is knot points?
- AIt generates a sequence of time-based “Control set points” for the control of the manipulator from the initial location to its destination
- BIt "approximates" the desired path be a class of polynomial functions
- CAll of the above
- DNone of the above
38Image processing is conversion from
- AImage to Image
- BImage to Data
- CData to Image
- DData to Interpretation
39Which pin has a built-in LED?
- A13
- B12
- C11
- D10
40Where the memory in Arduino is located?
- AMicrocontroller
- BRAM
- CHDD
- DProcessor
41The names of two major types of joints
- APrismatic and rotary
- BSynovial Joints and Fibrous joints
42What is the correct polarity of LED connection?
- AIt has two leads: longer one is connected to anode (+), and another one to cathode (-)
- BIt has two leads: longer one is connected to cathode (+), and another one to anode (-)
- CIt has two leads: longer one is connected to anode (-), and another one to cathode (+)
- DIt has two leads: longer one is connected to cathode (-), and another one to anode (+)
43How to set the PIN to INPUT?
- ApinMode(pin, INPUT);
- BpinMode(pin, OUTPUT);
- CdigitalWrite(pin, LOW);
- DdigitalWrite(pin, HIGH);
Information
- Description
- Information Technology Quiz on Robotics, created by Madina Umirbekova on 21/05/2017.
- Author
- Madina Umirbekova
- Language
- English
- Views
- 4
- Tags
- Rating
- No ratings yet Rate this quiz