CCNA WIFU - STUDY QUIZ - Mostly foreign

1. 1Which two principles must be considered when deploying a wireless network through a
   wooded area? (Choose two.)

   1. Aabsorption
   2. Breflection
   3. Cdiffraction
   4. Dscattering
   5. Erefraction
2. 2When using the CLI command eping, configured for auto-anchor mobility wireless guest
   access, which type of packet is tested?

   1. Adata packets
   2. Bmobility unencrypted packets
   3. Cmobility encrypted packets
   4. DSNMP control packets
   5. ENTP control packets
3. 3What encryption standards describe WPA and WPA2?

   1. AWPA mandates AES with TKIP optional, WPA2 mandates TKIP
   2. BWPA mandates TKIP with AES optional, WPA2 mandates AES
   3. CWPA mandates CKIP, WPA2 mandates AES
   4. DWPA mandates CKIP with AES optimal, WPA2 mandates AES
4. 4Which two attributes must be configured to match in order for WLCs to operate in the same
   mobility group? (Choose two.)

   1. Amobility domain name
   2. Bvirtual IP address
   3. Cservice interface address
   4. Dhardware model
   5. Esoftware version
5. 5If Cisco WCS version 7.0 needs to have APs added, relocated, or removed on a respective
   map, which menu leads to the correct location to make that adjustment?

   1. ASecurity
   2. BMonitor
   3. CConfigure
   4. DServices
   5. EAdministration
   6. FTools
6. 6Which two algorithms are available in RRM(Radio resource management)? (Choose two.)

   1. Acoverage-hole detection
   2. Bdynamic channel assignment
   3. CRSSI normalizer
   4. Dtransmitting channel expander
   5. Erogue detection
7. 7An AP was reset while working on the correct association to a Cisco WCS version 7.0.
   Which item was cleared during the reset?

   1. Astatic IP address
   2. Bthe location ID of the AP
   3. CWLC primary, secondary, tertiary
   4. DAP name
   5. Ecertificate
   6. FNothing was cleared
8. 8You are configuring SNMPv1/v2c on a WLC. What should you do for improved security?

   1. ARemove the default SNMPv1 community.
   2. BRemove the default SNMPv1 and SNMPv2 communities.
   3. CRemove the default SNMPv2 community.
   4. DRemove the default SNMPv3 users.
9. 9The wireless network is using controller-based APs and version 7.0 MR1. The APs appear
   to be connected properly to the controllers. A wireless user near one of the APs reports
   that they are unable to connect to the network with their pre-shared key.
   Which option shows the GUI path where you can check the connection status of that
   client?

   1. AWLANs > WLAN_ID > Advanced
   2. BSecurity > Clients
   3. CSecurity > Advanced > Clients
   4. DMonitor > Clients
   5. EWireless > 802.11b/g/n > clients
10. 10How are application-specific devices differentiated from laptop computers in the way they
    support Cisco Compatible Extensions?

    1. AASDs are required to support only Cisco Compatible Extensions v1 and v2 features. Laptops must support all Cisco Compatible Extensions features.
    2. BASDs are required to support only Cisco Compatible Extensions v5 management features, while laptops are required to support optional features.
    3. CSeveral features that are required for laptops are not required for ASDs.
    4. DThere is no differentiation. ASDs and laptops must both support the same Cisco Compatible Extensions features.

11. 11When Cisco AnyConnect modules are installed on a PC, which module must be installed
    first?

    1. Atelemetry
    2. Bweb security
    3. CVPN
    4. DNAM
    5. EDART
    6. Fposture
12. 12On the Cisco Wireless LAN Controller GUI, what sub-menu option under the Command
    menu will transfer code and configuration files to the controller?

    1. ADownload File
    2. BUpload File
    3. CDownload Configuration
    4. DUpload Configuration
13. 13An engineer recently removed a WLC from a WCS, but the APs associated to the WLC are
    still showing on the WCS. What is a reason for this?

    1. AThe associated APs must be removed manually.
    2. BThe APs must be removed from the WCS map.
    3. CThe hold-down timer must expire before the APs will be removed.
    4. DThe APs must be audited.
14. 14A customer who recently implemented Mac OS X Yosemite finds that the laptops have
    been autonegotiating the authentication protocols when performing RADIUS authentication
    to Cisco Identity Services Engine. What must the administrator do to statically set the
    correct settings for the Mac clients?

    1. ACreate a new network profile with the desired settings, using either the Apple iPhone Configuration Utility or Profile Manager and upload to all Mac OS X machines.
    2. BSet the authentication configuration to use the desired settings under the System Preferences > Network > Advanced menu.
    3. CDelete the SSID and have the users go through the authentication process again, this time selecting the settings during authentication.
    4. DSelect the SSID and change the settings to the desired configuration under Control Panel > Network > Wireless Networks and export to other machines.
15. 15On which two OSI layers does the IEEE focus in 802 standardization? (Choose two.)

    1. Aphysical
    2. Bdata-link
    3. Cnetwork
    4. Dtransport
    5. Esession
    6. Fpresentation
    7. Gapplication
16. 16An engineer has been asked to disable all non-OFDM rates in the wireless environment. What
    three rates should be disabled to fulfill this requirement? (Choose three.)

    1. A2
    2. B5.5
    3. C6
    4. D9
    5. E11
    6. F12
    7. G18
17. 17Which two Cisco Unified Wireless Network capabilities use information that is provided by
    Radio Resource Management neighbor messages in version 7.0 MR1? (Choose two.)

    1. Aaggressive load balancing
    2. Bdynamic channel assignment
    3. Chybrid remote edge access point
    4. Dinter-controller mobility (that is, mobility groups)
    5. Erogue AP classification
18. 18A network engineer notices that two mesh APs are having problems communicating. After
    reviewing the current radio configurations, it is noted that one AP is transmitting at 3 mW
    while the other is transmitting at 60 mW. How many decibels would the 3-mW AP need its
    power increased to match the 60-mW AP?

    1. A8
    2. B12
    3. C13
    4. D20
    5. E57
19. 19What is the difference between the IEEE, the WiFi Alliance, and the FCC, ETSI, and
    TELEC?

    1. AThe IEEE and FCC are responsible for the standards that apply to wireless networks. The WiFi Alliance, ETSI, and TELEC are the governmental agencies that regulate compliance with local standards.
    2. BThe IEEE is responsible for Layer 1 and Layer 2 protocols. The WiFi Alliance is responsible for interoperability testing. The FCC, ETSI, and TELEC are responsible for radio frequency and transmission power-level regulations and standards in the U.S., Europe, and Japan.
    3. CThe IEEE is responsible for Layer 1 and Layer 2 protocols. The FCC, ETSI, and TELEC are responsible for interoperability testing and compliance. The WiFi Alliance is responsible for radio frequency and transmission power-level regulations and standards on a global basis.
    4. DThe IEEE and FCC are responsible for the Layer 3 protocol support and frequency and power-level regulations in the United States. ETSI and TELEC are responsible for frequency and power-level regulations in Europe and Japan. The WiFi Alliance is responsible to interoperability testing.
20. 20You need to set up an ad hoc connection to another client in a conference room to
    exchange files using Windows 7. Which two items do you need to create this connection?
    (Choose two.)

    1. ASSID name
    2. BRF channel
    3. C802.1X/EAP credentials
    4. Dpre-shared key
    5. ETelnet
    6. FIBSS name
    7. GSSH
21. 21A network engineer in the GUI of WCS version 7 wants to add an autonomous access
    point. Where can this command be found in the drop-down menu?

    1. AConfigure > Access Point > Add Autonomous APs
    2. BManage > Access Points > Add Autonomous APs
    3. CAdministration > Access Point > Add Autonomous APs
    4. DLocation > Access Point > Add Autonomous APs
22. 22At which point in the network topology must the trunk be configured to support multiple
    SSIDs for voice and data separation?

    

    1. AA
    2. BB
    3. CC
    4. DD

Description

CCNA WIRELESS Quiz on CCNA WIFU - STUDY QUIZ - Mostly foreign, created by I L on 18/06/2017.

Author

I L

Language

English

Views

5

Tags

wirelessccna

Rating

No ratings yet

Rate this quiz

Rate this quiz

More on Wireless LAN Controllers