Redox
Folien in diesem Satz (20)
-
- Oxidation: occurs when an atom, molecule or ion loses 1 or more electrons. The oxidation number of the element involved increases.
- Reduction: is when an atom or ion gains 1 or more electrons. The oxidation number of the element involved decreases.
- Oxidising agent: is a substance that oxidises another substance & itself reduced. The oxidation number of an element in the oxidising agent decreases.
- Reducing agent: is a substance that reduces another substance and itself is its oxidised. Its oxidation number increases.
- The Oxidation number: of an atom in a compound (or ion) is the charge that it would have if the compound or ion were ionic.

-
- The rules for working out oxidation numbers should be applied in the following order:
- Oxidation number of an element in its standard state is 0.
- A simple monatomic ion has an oxidation number equal to its charge.
- The sum of the oxidation number in a neutral formula is 0.
- The sum of the oxidation number in an ion adds up to the charge on that ion.
- The oxidation number of hydrogen is +1, except in metal hydride where it is -1.
- Oxidation number of oxygen is -2, except in peroxides (e.g hydrogen peroxide, H2O2 where it is -1) or when combined with fluorine, where it is +2.
-

- Bildunterschrift: Copper disproportion
- This is a reaction in which an element in a single species is simultaneously oxidised & reduced. In the following reaction, the copper has been oxidised and reduced.
- The Cu+ has been reduced to Cu as well as being oxidised to Cu2+.
-
Change in Oxidation number & reaction stiochemistry
- The increase in oxidation number of the element in the reducing agent must equal the decrease in oxidation number of the element in the oxidising agent.
- You must remember that the reducing agent should be oxidised and the oxidising agent should get reduced.
-
- https://www.youtube.com/watch?v=oAOq55MPJpM (Einbetten)
- Definition of standard electrode potential: is the e.m.f of a cell containing a metal, dipping into a 1 mol dm-3 solution of its ions and connected to a standard hydrogen electrode at 1 atm & 25 degree celsius.
- The values are always stated as reduction potentials, with electrons on the left.
- The standard electrode potential is also called the standard reduction potential. The data can be given as a reduction equation or an E note value.
- Cathode is where it undergoes reduction
- Anode is where it undergoes oxidation
- Al3+/Al----> Standard hydrogen electrode
- (anode) (cathode
- Standard hydrogen electrode ----> Cu2+/Cu (anode) (Cathode)
-

- This is the reference electrode in all electrochemical measurements. Its value at 298K is defined as O volts.
- It consists of hydrogen gas at 1 atm pressure being passed over a platinum electrode dipping into a solution of 1.) mol dm-3 of hydrogen ions at a stated temperature.
- A reference electrode is needed, as a potential can't be measured on its own-only a potential difference.
-
Half-equation of hydrogen electrode
-
Measurement of standard electrode potentials
- The voltage of the electrode or half-cell is measured relative to a standard, such as the standard hydrogen electrode. For zinc, the half equation is Zn2+ (aq) + 2e- ⇌ Zn(s)
- Thus, it is the potential of a zinc rod dipping into a 1.0 mol dm-3 solution of Zn2+ ions at 298K, relative to a standard hydrogen electrode.
- For chlorine, the half equation is Cl2 (g) + 2e- ⇌ 2Cl- (aq). Thus, it's the potential of a chlorine gas at 1 atm pressure, bubbled over a platinum electrode dipping into a 1.0 mol dm-3 solution of Cl- ions at 298K, relative to a standard hydrogen electrode.
- For the Fe3+/Fe2+ system, the half-equation is Fe3+(aq) + e- ⇌ Fe2+ (aq). Thus, it is the potential when a platinum electrode is placed into a solution of concentration of 1.0 mol dm-3 in both Fe3+ & Fe2+ ions at 298K, relative to a standard hydrogen electrode.
- Note that all soluble substances, whether they're on the left or the right of the half-equation, must be at a concentration of 1.0 mol dm-3, if the standard potential is being measured.
-
- A reaction is said to be feasible (thermodynamically spontaneous), if the values of the cell potential (E⦵cell) is positive. The extent of the reaction depends on the number of electrons involved & the numerical value of E⦵cell.
- As a rough guide, reactions with E⦵cell ≻ 0.3 Volts will be virtually complete.
- The total entropy change, △S total, is directly proportional to the value of E⦵cell
- Where n is the number of electrons exchanged & F is the Faraday constant = 96 500 C & T is the temperature in Kelvin.

-
Calculation of E⦵cell for a reaction & Feasibility
- If a question asks 'Will substance A oxidise substance B?', you need to look for the half-equations containing A & B. You will find A on the left & B on the right of their half-equations.
- There are 3 methods for calculating E⦵cell ( which are called E⦵reactions) & predicting feasibility
-

- Write the half-equation out with the most negative standard electrode on top.
- Draw an anticlockwise arrow to show the direction of the half-equation
- Reverse the top half-equation and combine the half-equation
- If this matches the equation you want, it's feasible.
- Write full equation of reaction
-
- The value of E⦵cell can be obtained by reversing the half-equation containing substance B & at the same time changing the sign of the E⦵ value. Then add it to the half-equation for substance A. This is the better method if the overall equation is also needed.
-
- Write down the E⦵cell value for the reaction you want to move to the right.
- Subtract the E⦵ value of the reaction you want to move to the left.
- If the answer is positive then it's feasible.
- This is base on the formula:
- -E⦵cell = E⦵(oxidising agent) - E⦵(reducing agent)
- -Where E⦵ refer to the standard reduction potential, i.e the half equation with the electrons on the left.
- Identify the oxidising agent. Remember the oxidising agent is reduced & so is on the left of a standard electrode (reduction) potential equation.
- Identify the reducing agent. The reducing agent is oxidised and so is on the right of a standard electrode (reduction) potential.
- Calculate E⦵cell= E⦵ of oxidising agent - E⦵ of reducing agent, where the E⦵ values are the standard reduction potential of the oxidising agent ( on the left in its half equation) & of the reducing agent on the right in its half-equation

- Bildunterschrift: A reaction will be feasible if the E⦵ (oxidising agent) is more positive than the E⦵ of the half equation with the reducing agent on the right. The bigger the positive value of E⦵. stronger the substance is as an oxidising agent
-
When predictions & experiments don't agree
- There could be several reasons for this:
- Kinetics reasons: the activation energy of a reaction that is thermodynamically spontaneous (E⦵ cell) may not take place if the activation energy is too high
- It's needs to be in non-standard conditions in order for it to work
-
Concentration effect: non-standard conditions
- Aqueous copper (ii) ions shouldn't be reduced to aqueous copper (i) ions by iodide ions:
- Cu2+ (aq) +e- ⇌ Cu+ (aq) E⦵= +0.15V
- I2 (aq) + 2e- ⇌ 2I- (aq) E ⦵ =+0.54V
- Copper (II) ions are the oxidising agent & iodide ions the reducing agent, so for reaction (equation 1):
- 1. 2Cu2+ (aq) + 2I- (aq) ⇌ 2Cu+ (aq) + I2 (aq) E ⦵ = +0.15V -(+0.34V)= -0.39V
- E ⦵ cell is negative, so the reaction isn't thermodynamically spontaneous under standard conditions. However, when aqueous copper (ii) & iodide ions are mixed, the iodide ions do reduce copper (ii) ions. The reason can be seen in the equation for the reaction that does happen (equation 2):
- 2. Cu2+ (aq) + 2I- (aq) → CuI (s) + ½I2 (aq)
- Copper (i) iodide is totally insoluble and so [Cu+(aq)] is close to zero. This drives the equilibrium for equation 1 over to the right. The conditions aren't standard, so that although E⦵cell is negative, Ecell for the non-standard conditions are positive.
-
Writing a balanced redox reaction
- Write the skeleton of the oxidation and reduction reaction. The skeleton reactions contain the formulas of the compounds oxidized and reduced, but the atoms and electrons have not yet been balanced.
- Balance all elements other than Hydrogen and Oxygen.
- Balance all the oxygen atoms by adding water molecules where needed.
- Balance the hydrogen atoms by adding H+ ions where needed.
- Balance the charge by adding electrons e-.
- If the number of electrons lost in the oxidation half-reaction is not equal to the number of electrons gained in the reduction half-reaction, multiply one or both of the half- reactions by a number that will make the number of electrons gained equal to the number of electrons lost.
- Add the 2 half-reactions as if they were mathematical equations. The electrons will always cancel. If the same formulas are found on opposite sides of the half-reactions, you can cancel them. If the same formulas are found on the same side of both half-reactions, combine them.
- Check to make sure that the atoms and the charges balance.
-
Estimating the concentrations of a solution of an oxidising agent
- The general method is to add a known volume of a solution of the oxidising agent from a pipette to an excess of acidified potassium iodide & then titrate the liberated iodine with standard sodium thiosulfate solution.
- Starch is added when the iodine has faded to a pale straw-colour & the sodium thiosulfate solution is then added drop by drop until the blue-black starch iodine colour disappear
- The equation for the titration reaction is:
- I2 + 2Na2S2O3 → 2NaI + Na2S4O6
- 2S2O3^2- (aq) → S4O6^2-(aq) + 2e-
- I2(aq) + 2e- → 2I-
- 2S2O3 (aq) + I2 → S4O6^2-(aq) + 2I- (aq)
-
- The concentration of Copper (ii) ions in a sample can be found using an iodine/thiosulfate titrations as part of a stepwise process.
- 1. Add excess potassium iodide solution to a known volume of the solution containing copper (ii) ions. Copper (i) Iodide (CuI) forms as a white precipitate & iodine is formed & remains in a solution.
- 2Cu2+ (aq) + 4I- (aq) → 2CuI(s) + I2.
- 2. Titrate the iodine solution with standardised sodium thiosulfate as before to find the concentration of iodine in the solution.
- 3. You can now work backwards to the concentration of copper (ii) ion in the original sample.
-
Estimating the concentration of reducing agents
- Almost all reducing agents reduce potassium manganate (VII) in acid solution. The colour of potassium manganate (VII) is so intense that there's no need to add an indicator.
- Transfer 25cm3 of the solution of the reducing agent from a pipette into a conical flask
- Acidify with approximately 25cm3 of dilute sulphuric acid
- Rinse a burette with water & then with some standard solution of potassium manganate (VII)
- Add the potassium manganate (VII) solution from a burette until a faint, permanent pink/purple colour is obtained
- Repeat until 2 consistent titres are obtained & find the average of their values
-
Titration of Potassium Manganate (VII) with iron (ii) ions
- In this reaction, iron (ii) ions are oxidised & manganate (VII) ions are reduced. The equation and the colour involved are:
- 1. Reduction: MnO4^-(aq) + 8H+ + 5e- → Mn2+ (aq) + 4H2O(l)
- 2. Oxidation : Fe2+(aq) → Fe3+(aq) + e-
- 3. Overall: MnO4^-(aq) + 8H+ + 5Fe2+ → Mn2+(aq) + 5Fe3+(aq) + 4H2O(l)
- (purple) (colourless) (colourless ) (colourless)
- Note that these colours apply only when the species are in dilute solutions-at higher concentrations, Fe2+(aq) is pale green, Fe3+(aq) is yellow & Mn2+(aq) is pale pink/purple
- A measured volume of iron (ii) solution is pipetted into a conical flask. This solution is acidified with a small amount of dilute sulphuric acid. Potassium Manganate (VII) solution is then added slowly from a burette.
- After swirling to encourage mixing, the solution in the ironical flask remains colourless until all of the iron (ii) ions have been oxidised to iron (iii) ions. Then, the addition of just 1 more drop of potassium manganate (VII) solution turns the solution pale pink.
- This colour change means that there's no need to use an addition reaction-the reaction is self-indicating.
Informationen
- Beschreibung
- A-Level Chemistry (Unit 5) Folienset am Redox, erstellt von Haneen Al-Baghdadi am 05/04/2016.
- Erstellt von
- Haneen Al-Baghdadi · Apr 2016
- Aktualisiert
- 16 Okt 2016
- Aufrufe
- 4
- Bewertung
