Quiz
1 Transmission
Erstelle ein kostenloses Konto, um dieses Quiz zu beenden
Speichere deinen Fortschritt und sieh dir dein Endergebnis an.
oder mit deiner E-Mail registrieren
Schon ein Konto? Anmelden
Fragen in diesem Quiz (40)
1_____________is the (insertion and withdrawal) times modular plugs can withstand between terminations or replacement.
- AFunctionality
- BMating cycles
- CCoupling
2One of the purposes of a standard is to ensure a minimal level of acceptable ______________.
- Aperformance
- Bprocess
- Cmethod
3While codes and safety standards address the safety of persons and property in the installation or use of a system, codes ________ ensure system functionality.
- Ado
- Bdo not
- Cshall
4The predominant coaxial cables recognized for cabling subsystems 1 are
- ASeries 6, Series 11
- BRG 59, RG 6
5_______________ is the movement of information by electromagnetic energy in the form of electrical or optical signals from one point to another through a transport medium.
- ABandwidth
- BFrequency
- CTransmission
6Twisted pair cable is called ___________where coaxial cable is called _____________.
- Aunbalanced, balanced
- Bbalance, unbalanced
7All electrical activity produces electric and magnetic fields.
- ARichtig
- BFalsch
8The transmission of analog data can be converted from analog format to digital with a ____________.
- ACodec
- BModem
9________________ represents the information carrying capacity of a system.
- ABandwidth
- BFrequency
- CTransmission
10______________ is a property of conductor that allows storage of electric charges when potential differences
(voltages) exist between the conductors.- AInductance
- BCapacitance
- CResistance
11In ac circuits, the total opposition to current flow is called ___________, which is measured in ohms.
- ACapacitance
- BInductance
- CImpedance
12_______________ is defined in the number of cycles a signal is repeated in a given time period.
- AFrequency
- BVoltage
- CCurrent
13The measure of a signal loss resulting from the insertion of a component, link, or channel between a transmitter and receiver is
- AReturn loss
- BCross-talk
- CAttenuation
14_______________ is a property of an electromagnetic field built around a conductor that opposes any changes in current flow in a circuit, both ac and varying dc.
- AInductance
- BImpedance
- CCapacitance
15The transmission of digital data can be accomplished on a direct digital basis over a digital circuit, or it can be converted to a analog signal with a ________________ .
- Acodec
- Bmodem
16This is the property of a conductor to resist the flow of electricity through it.
- AResistance
- BInductance
- CImpedance
17The unwanted transfer of a signals electromagnetic energy from one or more circuits to other circuits is called______________.
- AAttenuation
- BCrosstalk
- CInductance
18Test equipment uses Nominal Velocity of Propagation (NVP) to determine the length of a cable.
- ARichtig
- BFalsch
19______________ quantifies the bandwidth of a cabling system in a frequency range.
( size of the highway )- Amegahertz
- Bmegabit
- Cdecibel
20_____________ refers to the amount of information that can be transported over the media.
( vehicles on the highway )- Amegahertz
- Bmegabit
- Cdecibel
21Electromagnetic interference (EMI) conditions can be remedied by... select all the are correct.
- Ashielded cabling
- Bincreasing physical separation
- Cplacing unshielded cable in conduit
22The POTS signal range is transmitted between______________, which is regarded as the minimum range for human speech to be audible and recognizable.
- A300 and 3400 Hz
- B300 and 3400 MHz
- C300 and 3400 kHz
23System gain and attenuation are typically stated as ______ gain or _______ loss.
- Abandwidth
- Bfrequency
- Cdecibel
24________________ is the ratio of the power of the outgoing signal to the power of the reflected signal and is expressed in decibels.
- Areturn loss
- Binsertion loss
- Ccross talk
25Because of the different twist rates in a multi-pair cable, the physical length of untwisted pairs is not equal.
- ARichtig
- BFalsch
26What is the frequency of TIA category 6, ISO category 6/Class E.
- A100 MHz
- B250 MHz
- C500 MHz
27What are the common modular connectors used in ICT: select all that are correct
- A4P4C
- B6P6C
- C8P8C
28Delay skew is the difference in the propagation delay between the slowest and fastest pairs within the same cable sheath.
- ARichtig
- BFalsch
29110 termination blocks come in increments of________________
- A50, 100, 300, and 900
- B50, 100, 600, and 900
- C50, 150, 300, and 900
30Bix termination blocks assemblies come in increments of ____________
- A50, 100, 300, 900
- B50, 150, 300, 600
- C50, 250, 300, 900
31Series 6 and Series 11 have a coated foil shield over the dielectric to shield against_________frequencies, while the braided shield over the coated foil is to shield against ____________frequencies.
- Alow, high
- Bhigh, low
32In optical fiber, the purpose of the ________ is to confine the light within the _________ by creating a reflective boundary.
- Acladding and core
- Bcore and acrylate coating
- Ccore and cladding
33_____________ is the most common for backbone and horizontal runs within building and campus environments.
- Amulti-mode
- Bsingle-mode
34A code can be defined as " a rule or set of rules intended to ensure safety during the installation and use of materials, components, fixtures, systems, premises and related subjects."
- ARichtig
- BFalsch
35Who normally enforces the codes and legal regulations for the jurisdiction?
- AOSHA
- BAHJ
- CFire marshall
36Increasing either the length of the optical fiber cable or the wavelength of the light source decreases the bandwidth and the information carrying capacity of the transmission path.
- ARichtig
- BFalsch
37_____________ is the widening or spreading out of the modes in a light pulse as it progresses along the optical fiber.
- ABandwidth
- BDispersion
- CRefraction
38Modal dispersion results from the different optical path lengths in a multi-mode fiber.
- ARichtig
- BFalsch
39This type of optical fiber is : primarily used outdoors, has shorter jacket length to the fiber length, allows jacket to expand and contract with temperature changes, may contain water blocking material...
- ATight buffered
- BSimplex
- CLoose tube
40Humans can hear frequencies that range from _______to_________.
- A20 Hz to 2000 Hz
- B20 Hz to 20,000 Hz
- C20 MHz to 20,000 MHz
Informationen
- Beschreibung
- Evaluation Quiz am 1 Transmission, erstellt von Jeanie Fitzgerald am 03/11/2017.
- Autor
- Jeanie Fitzgerald
- Sprache
- English
- Aufrufe
- 11
- Schlagwörter
- Bewertung
- Noch keine Bewertungen Bewerte dieses Quiz