Help shape GoConqr. What should we add next?

Quiz

Exam 2 Prep

Nathaniel Parkinson 30 questions

Take the quiz

This quiz has question types that open in the usual player.

Questions in this quiz (30)

  1. 1The [blank_start]phospholipid bilayer[blank_end] (Forms a [blank_start]flexible, self-repairing wall[blank_end] that allows for the movement of the other 2 parts and for the cell.), [blank_start]cholesterol[blank_end](controls the [blank_start]fluidity[blank_end] of the membrane), and [blank_start]Proteins[blank_end] associated with the membrane(receives signals and transports nutrients and waste). A [blank_start]selectively[blank_end] permeable membrane means that a membrane can choose what can come through, whereas a [blank_start]semi-[blank_end]permeable membrane will allow in whatever fits.
    1. Aphospholipid bilayer
    2. Bphospholipid layer
    3. Cprotein membrane
    4. Dcholesterol
    5. EProteins
    6. FDNA
    7. GLipids
    8. HSugars
    9. Ifluidity
    10. Jmovement
    11. Klipidity
    12. Lflexible, self-repairing wall
    13. Mmembrane
    14. Ncellular wall
    15. Oselectively
    16. Psemi-
  2. 2substances that can move through a membrane without protein assistance.
    [blank_start]Gasses[blank_end],
    [blank_start]Carotenoids[blank_end],
    [blank_start]Eicosanoids[blank_end],
    [blank_start]steroids[blank_end]
    [blank_start]Water[blank_end].

    substances that cannot move through a membrane without [blank_start]protein[blank_end] assistance. How do these substances move through membranes if your cell chooses to transport them?
    [blank_start]Proteins[blank_end],
    [blank_start]Carbohydrates[blank_end],
    [blank_start]Nucleic acids[blank_end],
    [blank_start]Ions[blank_end],
    [blank_start]Triglycerides[blank_end].

    A [blank_start]carrier protein[blank_end] helps get them through the membrane.
    1. AGasses
    2. BCarotenoids
    3. CEicosanoids
    4. Dsteroids
    5. EWater
    6. FProteins
    7. GCarbohydrates
    8. HNucleic acids
    9. IIons
    10. JTriglycerides
    11. Kcarrier protein
    12. Lprotein
  3. 3 [blank_start]Osmosis[blank_end] is the diffusion of water. Meaning water moves from a place of excess to a place of low concentration until the two are equal in concentration. This is passive.

    [blank_start]Tonicity[blank_end] is how much of a solute there is in something. [blank_start]Hypertonic[blank_end] has a higher concentration of solutes, [blank_start]Hypotonic[blank_end] has a lower concentration of solutes, and [blank_start]isotonic[blank_end] has the same concentration. Water heads towards the side with more solutes.

    [blank_start]Aquaporins[blank_end] are large channel proteins that form pores through cell membranes to allow water to come in or out of a cell, but also to exclude the movement of ions.

    [blank_start]Carrier[blank_end] proteins work by binding to a ligand and by changing its shape, move that ligand into or out of the cell.

    [blank_start]Channel[blank_end] protein transporters function by acting as a hole that allows a certain molecule in. An example is an aquaporin which only allows water.

    Factors that affect diffusion and osmosis are the [blank_start]Concentration of the solutes[blank_end] and the [blank_start]number of channels available[blank_end] to the water.
    1. AOsmosis
    2. BTonicity
    3. CHypertonic
    4. DHypotonic
    5. Eisotonic
    6. FAquaporins
    7. GCarrier
    8. HChannel
    9. IConcentration of the solutes
    10. Jnumber of channels available
  4. 4[blank_start]Primary/Direct[blank_end] Active Transport: This is a means of Transport that uses ATP/energy to force a substance against its gradient. The most commonly used primary active transport the Na+/K+ pump. This works by having 3 spots for Na+ inside its pump and two for K+. It puts 3 Na+ ions inside, splitting ATP, releasing a phosphate, the phosphate causes the pump to change shape, releasing the Na+ ions outside. Then, 2 K+ ions into the pump, changing the shape of the pump, releasing the phosphate. This then expels the K+ ions and causes the pump to revert to its original shape.

    [blank_start]Secondary/Indirect[blank_end] Active Transport: This uses a secondary form of energy -a concentration gradient - to move a substance against the concentration gradient. It is called indirect because it indirectly uses ATP. Glucose is pumped from low to high using a byproduct of the creation of ATP- Na+. The pump takes Glucose and a Na+ ion from outside and pumps them into the cell, by changing shape when the two interact with it.

    The two transport types work in tandem by the following:
    [blank_start]Direct[blank_end] Transport causes a voltage difference between the outside and inside of the cell when it pumps stuff. [blank_start]Indirect[blank_end] transport uses this voltage difference to pump stuff from the outside in.

    Factors that affect active transport rate:
    [blank_start]The rate of individual pumps[blank_end](affected by the [blank_start]affinity[blank_end] of the pump, the [blank_start]concentration[blank_end] of the substance, and the [blank_start]electrochemical[blank_end] driving force.) [blank_start]The number of pumps present[blank_end] in the membrane.
    1. APrimary/Direct
    2. BSecondary/Indirect
    3. CDirect
    4. DIndirect
    5. EThe rate of individual pumps
    6. FThe number of pumps present
    7. Gaffinity
    8. Hconcentration
    9. Ielectrochemical
  5. 5[blank_start]Exocytosis[blank_end]: The process used to move large molecules/debris out of cells. A movement is done through Vesicles. [blank_start]Endocytosis[blank_end]: The process used to move large things into the cell. Done through vesicles budding off the PMand moving into the interior of the cell.
    3 types of Endocytosis: [blank_start]Phagocytosis[blank_end] (cell eating), [blank_start]Pinocytosis[blank_end](cell drinking), [blank_start]receptor-mediated endocytosis[blank_end] (a receptor mediates it, used to choose what is allowed in.)

    A cell would use [blank_start]bulk transport[blank_end] when a molecule is too big to transport with transport proteins.

    Factors for a cell's choice of transport is:
    [blank_start]Size[blank_end] of substance, whether it is going from a [blank_start]high to low concentration or low to high[blank_end], whether or not it [blank_start]needs the energy to move.[blank_end]
    1. AExocytosis
    2. BEndocytosis
    3. CPhagocytosis
    4. DPinocytosis
    5. Ereceptor-mediated endocytosis
    6. Fbulk transport
    7. GSize
    8. Hhigh to low concentration or low to high
    9. Ineeds the energy to move.
  6. 6All of these methods are methods of [blank_start]Endocytosis[blank_end]:
    [blank_start]Phagocytosis[blank_end] (cell eating, engulfs large things into them. The PM buds off in a huge vesicle surrounding the "eaten" particle.), [blank_start]Pinocytosis[blank_end](cell drinking where liquid drops are trapped in the invaginations of the PM, pinched off to form small vesicles whose contents are later diffused into the cytoplasm), [blank_start]receptor-mediated endocytosis[blank_end] (a receptor mediates it, used to choose what is allowed in. A specific molecule must bind to this receptor in order for that molecule to be endocytosed into a vesicle.)

    Which transport for which situation:
    [blank_start]Passive[blank_end] Transport: When a small molecule like water needs to go from a high to low concentration.
    [blank_start]Active[blank_end] Transport: When a molecule needs to go from a low to a high concentration environment (from outside to inside), or when it is a medium-sized molecule.
    [blank_start]Bulk[blank_end] transport for when the substance is too big for transport proteins, or when attacking invading bacteria.
    1. AEndocytosis
    2. BPhagocytosis
    3. CPinocytosis
    4. Dreceptor-mediated endocytosis
    5. EPassive
    6. FActive
    7. GBulk
  7. 7Cells [blank_start]communicate[blank_end] because organisms are [blank_start]infinitely[blank_end] complex and require a [blank_start]lot[blank_end] of cooperation in order to function properly.

    Cellular Communication:
    1) [blank_start]Signal[blank_end]- A source cell generates a signal
    2) [blank_start]Reception[blank_end]- The target cell receives that signal
    3) [blank_start]Transduction[blank_end]- Causes a response to happen
    4) [blank_start]Response[blank_end]- Response to the signal from the source cell.
    5) [blank_start]Termination[blank_end]- Once the signal ceases, the response ceases.
    1. Ainfinitely
    2. Bnot that
    3. Ccommunicate
    4. Ddon't communicate
    5. Elot
    6. Flittle
    7. GSignal
    8. HReception
    9. ITransduction
    10. JResponse
    11. KTermination
  8. 8[blank_start]Small, and/or hydrophobic[blank_end] signaling molecules can pass
    unaided through a Plasma membrane.
    [blank_start]Large and/or hydrophilic[blank_end] signaling molecules cannot pass unaided through a
    membrane.
    [blank_start]Amino Acid[blank_end] messengers: Glutamine, aspartate, glycine, and gamma-aminobutyric acid. Hydrophilic.
    [blank_start]Amine[blank_end] messengers: These possess an amino group. Hydrophilic.
    [blank_start]Peptide/Protein[blank_end] Messengers: Large and hydrophilic.
    [blank_start]Steroid[blank_end] messengers: Hydrophobic.
    [blank_start]Eicosanoid[blank_end] Messengers: small, hydrophobic.
    [blank_start]Gasses[blank_end]: Small and hydrophobic.
    [blank_start]Hydrophobic[blank_end] ligands are formed when a specific message needs to get out, and they can get through without aid.
    [blank_start]Hydrophilic[blank_end] ligands are formed when a mass message gets out and it needs help from bulk transport.

    [blank_start]Direct[blank_end] communication- physical interaction between two cells. (Gap Junctions and Juxtacrine) Gap Junctions
    [blank_start]Paracrine[blank_end]: A short-distance messenger from a source cell to a neighboring cell (Autocrine, Synaptic
    Signals/Neural Transmission. Neural transmission.)
    [blank_start]Hormonal[blank_end] (endocrine): a chemical messenger that travels from source to target through the blood. Usually formed in endocrine glands (any messenger that travels through the blood). pituitary gland.

    1. ASmall, and/or hydrophobic
    2. BLarge and/or hydrophilic
    3. CAmino Acid
    4. DAmine
    5. EPeptide/Protein
    6. FSteroid
    7. GEicosanoid
    8. HGasses
    9. IHydrophobic
    10. JHydrophilic
    11. KDirect
    12. LParacrine
    13. MHormonal
  9. 9A [blank_start]chemical receptor[blank_end] is a chemical [blank_start]"lock"[blank_end] that will only work for a certain ligand(signal).

    [blank_start]Intracellular[blank_end] receptors: A [blank_start]intracellular receptor[blank_end] combines with either a cytoplasmic receptor or nuclear receptor, forming a hormone-receptor complex. The HR then goes inside the nucleus, binds to pieces of DNA called the Hormone Response element, which sits before specific genes that hormones target. These HREs then turn on or off transcription machinery for the central dogma of biology. (DNA-mRNA-Protein). Takes a while, but the effects last hours to years.
    [blank_start]Hydrophobic Cell-Surface Receptors[blank_end]: A receptor embedded in a membrane, with 3 structure types.

    Signaling molecules that bond with [blank_start]intracellular receptors[blank_end]:
    [blank_start]Steroids[blank_end], [blank_start]Eicosanoids[blank_end], and [blank_start]Gasses[blank_end]. Because they are all of them, hydrophobic and hydrophobic things tend to get along well with each other, and they would pass through a membrane.

    Parts of cell surface receptors:
    [blank_start]External Docking[blank_end] site for the signal molecule, [blank_start]Transmembrane[blank_end] section spanning the cell membrane, and a [blank_start]Tail region[blank_end] that extends into the cytoplasm.
    1. Achemical receptor
    2. B"lock"
    3. C"key"
    4. D"combination"
    5. E"seed"
    6. FIntracellular
    7. Gintracellular receptor
    8. HHydrophobic Cell-Surface Receptors
    9. Iintracellular receptors
    10. JSteroids
    11. KEicosanoids
    12. LGasses
    13. MExternal Docking
    14. NTransmembrane
    15. OTail region
  10. 10The three types of cell surface receptors
    [blank_start]Ion Channel Linked[blank_end] Receptors: These convert chemical signals into electrical signals such as in neurons and muscle cells.These open or close ion channels by changing their shape, in response to the specific ligand
    binding.
    [blank_start]G Protein Linked[blank_end] Receptors: This type of receptor has a special intercellular peripheral membrane protein associated with it called a GTP-binding protein: we call these G-proteins! When the ligand binds with these receptors they change their shape which "bumps" the internal G-Protein which triggers it to move (using GTP as its energy source).
    [blank_start]Enzyme-linked[blank_end] receptors: Function as enzymes or are directly linked to enzymes, usually are Transmembrane proteins with a binding site on the outside out the cell and an enzymatic site on the inside. There are several major groups of these, one being tyrosine kinases (kinase is an enzyme that phosphorylates something)

    These are the three things that dictate a cell's response to a signal:
    The [blank_start]concentration of signal[blank_end]- how much the signal comes in in a certain period of time. The [blank_start]number of a specific type of receptor[blank_end] [blank_start]on the cell's membrane[blank_end] - how many signals can come into the cell over a period of time.
    The [blank_start]affinity receptor for the ligand[blank_end] - better affinity, the more efficient the response.
    1. AIon Channel Linked
    2. BG Protein Linked
    3. CEnzyme-linked
    4. Dconcentration of signal
    5. Enumber of a specific type of receptor
    6. Fon the cell's membrane
    7. Gaffinity receptor for the ligand

Information

Description
N/A Old stuff Quiz on Exam 2 Prep, created by Nathaniel Parkinson on 22/02/2021.
Language
English
Views
1
Tags
old stuffn/a
Rating
No ratings yet
Rate this quiz
Rate this quiz

More on Cell Transport

Feedback

What is it about?

What should we add next?