Help shape GoConqr. What should we add next?

Flashcards

4.2 Pressure and Density

Ella Davies MET English 43 cards

Cards in this deck (43)

  1. 1define barometric tendancyway and the rate of which pressure changes
  2. 2What happens when isobars are close togetheryou get strong winds
  3. 3what happens when isobars are far apartyou get calmer or no winds
  4. 4how can you tell if an area has low pressurethe isobars pressure decreases as you go intowards towards the centre
  5. 5how can you tell if the isoabrs are representing a high pressure areathe isobars increase in pressure iwards, towards the centre
  6. 6what weather is associated with high pressureanticyclones
    nice weather
  7. 7what weather is associated with low pressurepoor weather systems
  8. 8define a colan area between x2 high pressure systems and x2 low pressure systems
  9. 9what characteristics are associated with a col in summerthunderstorms
  10. 10what characteristics are associated with a col in winterfog
  11. 11what does FPS stand forFlat pressure systems
  12. 12is 500 hpa higher or lower in warm air than standard ISA temperatures?higher
  13. 13is 500 hpa higher or lower in cold air than standard ISA temperatures?lower
  14. 14what are Hypohypseslines on a 3D weather chart indicated areas of the same pressures at different heights
  15. 15define densitymass of air per unit volume
  16. 16what are the units of densityg/m3
  17. 17density does what with an increase in heightdecrease
  18. 18density does what with an increase in pressureincreases
  19. 19density does what with a increase in temperaturedecrease
  20. 20density does what what with a increase in humiditydecreases
  21. 21what has the biggest effect on densitypressure
  22. 22what type of density is optimal for flighthigh density
  23. 23what can low density causereduction in :
    engine performance
    lift
    fuel consumption
    accuracy of aircraft pressure instruments
  24. 24at what altitude is density the same26 000 ft
  25. 25where does half density occur20 000ft
  26. 26where do u find high density low or high groundlow
  27. 27where do u find high density high or low temperaturelow temp
  28. 28where do u find high density high or low humiditylow
  29. 29what can you say about density in relation to the diurnal variation against temperature graphdensity is inversely proportional to temperature
  30. 30what can you say about the density when there is a "high density Altitude"density is low
  31. 31what can you say about density when there is a "Low density Altitude"density is high
  32. 32define Relative densityambient air density compared to the density of the ISA MSL air
  33. 33what is the formula for density altitudeDA = PA + (120 x ISA Deviation)
  34. 34what is the pressure altitudetaken from the Standard pressure setting
  35. 35what is SPSStandard Pressure setting
  36. 36what is the SPS1013.25 HPA
  37. 37what is the name of the place where you go from using Altitude to FLTransition altitude
  38. 38what is the name of the place where you go from FL to AltitudeTransition Level
  39. 39where does the QNH measure frommean sea level using ISA lapse rate
  40. 40where does QFE measure fromelevation above sea level
  41. 41what is QFFmean sea level using ambient lapse rate
  42. 42what is QNEwhere u get told the altitude that the Altimeter will read at the aerodrome, and therefore can work out your actual height by taking this value away. usually used when you cannot set the subscale as low as it pressure at the aerodrome
  43. 43what is the density at MSL1.225 m/g3

Information

Description
MET Flashcards on 4.2 Pressure and Density, created by Ella Davies on 15/02/2018.
Created by
Ella Davies
Views
3
Rating

More on The Atmosphere and Standard Atmosphere

Feedback

What is it about?

What should we add next?