Flashcards
Chapter 5: Looking Inside Materials
Cards in this deck (102)
- 15.1: MATERIALS UNDER THE MICROSCOPE.
- 2What did Lord Rayleigh do?He performed a simple experiment that enabled him to estimate the thickness of an oil layer floating on water.
- 3What is the case if the oil spreads out as far as possible?The thickness of the layer will be equal to the length of the oil molecule.
- 4What is the largest source of uncertainty?The diameter of the oil drop.
- 5Where does this uncertainty come from?The difficulty of measuring the diameter of an oil drop more precisely than about +-0.5mm.
- 6What can a similar method be used to do?It can be used to estimate the size of an atom in a solid by calculating the volume it occupies.
- 7What can we estimate if we know the mass of a gold atom and the density of gold?We can estimate the diameter of a single gold atom.
- 8What are the steps1) Density = Mass/ Volume
2) Sub the density of gold in as the mass because it's kgm^-3 and the volume is 1 m^3
3) Number of atoms in 1m^3 of gold = Total mass of gold/ Mass of 1 gold atom.
4) That number of atoms have a volume of 1m^3
5) So volume of 1 atom = 1 /Number of atoms
6) Making assumption that gold atoms are cubes to simplify arithmetic, the length of one side of the cube is the square root of the volume of one atom. - 9What does an AFM do?An AFM moves a needle over a sample to detect the contours of the surface.
- 10On what scale can an AFM detect changes?On an atomic scale.
- 115.2: MODELLING MATERIAL BEHAVIOUR.
- 12What do AFMs and STMs tell us?They tell us about the arrangement of atoms on the surface of a material.
- 13What may be different about the atoms within the material however?The atoms within the material may be arranged differently.
- 14Give an example of a technique that can tell us more about the arrangement of atoms beneath the surface of a material.X-ray diffraction crystallography.
- 15What are metals? What does this mean?Crystalline; the individual particles are arranged in a regular pattern.
(See diagram) - 16What are some pure metals?Malleable and ductile.
- 17What can we explain this behaviour with?The idea of dislocations
- 18What are dislocations?Dislocations are missing atoms (vacancies) in the otherwise orderly arrangement.
- 19What makes metals ductile? Why?The movement of dislocations; a dislocation moving through layers of atoms allows layers to move one atom at a time. This greatly reduces the energy needed to deform the metal.
- 20What type of deformation occurs due to the movement of dislocations?Plastic deformation.
- 21What would be the case without mobile dislocations?Metals such as gold could not be hammered into shape.
- 22Do ceramic materials also have dislocations within their structure? What is the difference to metals?Ceramic materials also have dislocations within their structures but the dislocations are not mobile, so they do not move through the material.
- 23What mechanical property does this cause?It means that ceramic materials are therefore brittle.
- 24What is the general difference in ductility between metal alloys and pure metals?Metal alloys tend to be less ductile than pure metals.
- 25How can metal alloys be formed?They can be formed by the addition of other metallic elements that usually have different sized atoms.
- 26What can these different sized atoms do?These can pin down the dislocations in the metal structure, making slippages between the layers of atoms more difficult.
- 27How are the atoms in gold arranged?In a regular array; a crystal lattice.
- 28What must be done to shape the metal?One layer must be made to slide over another.
- 29What happens in the movement of layers in perfect crystals?To slip, a layer of atoms must move as a whole. (See diagram)
- 30What happens in the movement of layers of crystals with dislocations?Atoms can move one by one, so as one atom moves the whole dislocation moves until the dislocation reaches the edge of the crystal. (see diagram)
- 31Why is the first model the wrong model?Making all the atoms slip together requires considerable energy; this model predicts metals to be much stronger than they actually are.
- 32Why is the model with dislocations the better model?Because one atom slipping at a time requires much less energy; the dislocation model predicts the strength of metals much better.
- 33What does the proportion of alloy atoms in a lattice do?It changes the properties of the alloy.
- 34What happens in the model with a pure crystal with a dislocation?The dislocation is free to move and slips occur easily.
- 35What happens in the model of an alloy with a dislocation?The different sized alloy atom pins the dislocation, and the slip is more difficult. (see diagram).
- 36When do solids form?Solids form when liquids cool.
- 37What 2 things may the internal structure of the resulting solid be?- Crystalline, like metals
-or Amorphous (disordered), like glass. - 38What does rapid cooling tend to do?Rapid cooling tends to trap particles in an amorphous state, resembling the disordered arrangement in a liquid.
(See diagram) - 39What can slow, controlled cooling of a liquid lead to?It can lead to a single, pure crystal.
- 40What are many solids?Many solids are neither purely crystalline nor completely amorphous; they are polycrystalline.
- 41What does a polycrystalline material consist of?It consists of a number of grains all oriented differently relative to one another, but with an ordered, regular structure within each individual grain.
(see diagram) - 42What happens as liquid cools?As liquid cools, crystals start to form at different points within it.
- 43What does each crystal do? What is the result of this?Each crystal grows out into the remaining liquid until it runs into its neighbours; the result is a patchwork of 'grains'.
- 44What is the interface where these grains meet known as?The grain boundary.
- 45What is the strength of materials affected by?It is affected by tiny cracks and flaws in the structure of materials.
- 46What can the stress concentration around such cracks be?The stress concentration around such cracks can be much greater than the applied stress.
- 47What can this lead to?This can lead to cracks working through a specimen until it fractures.
- 48What happens on an atomic level?At the tip of a crack, 2 neighbouring atoms are pulled apart. The next 2 atoms are pulled apart, and the next 2, and so on... The crack propagates through the material.
- 49What do cracks do under stress?Cracks propagate through materials under stress.
- 50What 2 things happen when a material is bent?- The upper surface is stretched
- The lower surface is compressed. - 51Why does a material with no cracks not break or become much weaker?The contours of equal tensile stress mean that the largest stress is near the surface of the material (see diagram).
- 52What happens to a material with cracks?The crack deflects tensile stress and stress is concentrated below the crack. Because there is a very small area at the tip of the crack, stress is very large here. At the tip of a crack, the bond between 2 neighbouring atoms is highly stressed. The bond breaks, so the next bond is stressed and so on...
(See diagram) - 53What is a mechanical property of many metals?Many metals are tough.
- 54What is toughness a measure of?Toughness is a measure of the energy needed to extend cracks through a material.
- 55How does the energy needed to extend a crack in a tough metal compare to the energy needed for a brittle substance?It takes more energy to extend a crack in a tough metal than in a brittle substance.
- 56Why is this?This is because metals are ductile- When a stress is applied to the crack, the metal deforms plastically in the region of the crack- which makes the crack broader, reducing the stress around the crack.
(See diagram) - 57What is it important to remember?It is important to remember that strength and toughness are not the same thing.
- 58When is a material strong?A material is strong if it has a large breaking stress.
- 59When is a material tough?A material is tough if it will not break by shattering- toughness is the ability of a material to absorb energy and plastically deform without fracturing.
- 60What is breaking strength?The breaking strength is the greatest stress, especially in tension, that a material is capable of withstanding without rupture.
- 615.3: MICROSCOPIC STRUCTURES AND MACROSCOPIC PROPERTIES.
- 62What does 'microscopic' mean?Microscopic means 'not visible to the unaided eye'.
- 63On the other hand, what does macroscopic imply?Macroscopic implies something you can see or a property that is detectable without using sophisticated equipment.
- 64What do ceramics undergo?They undergo brittle fracture.
- 65How have we explained macroscopic properties like brittleness and toughness?By considering the microscopic structure of the materials.
- 66What do many of these properties depend on?Many of these properties depend upon the bonds between atoms in the materials.
- 67What are the 3 types of bonds between atoms?- Covalent
- Ionic
- Metallic. - 68What are bonds in ceramics and ionic compounds also?The bonds in ceramics and ionic compounds are directional.
- 69What does this mean? What does this make the materials?This means that the atoms are locked in place and cannot slip, making the materials hard and brittle.
- 70What structures do ceramics have?Ceramics have rigid, covalent structures.
- 71Give 2 examples of ceramics.-Silica
-Diamond - 72How do atoms form covalent bonds?Atoms share electrons with neighbouring atoms to form covalent bonds.
- 73What are covalent bonds?Covalent bonds are directional- they lock atoms in place. They are also strong.
- 74What are 3 properties of silica? Why does silica have these properties?Silica is stiff because the bonds are strong.
Silica is also hard and brittle because the atoms cannot slip. - 75What type of bonds to metals have?Metals have non-directional bonds in metallic structures.
- 76What are the atoms in metals?Ionised.
- 77What do the free electrons in metals do?The free electrons in metals move between the ions.
- 78What does the negative charge of these electrons do? What can still happen however?The negative charge of the electrons 'glues' the ions together but the ions can still easily change places.
- 79What are 3 properties of metals? Why do they have these properties?Metals are stiff, because the bonds are strong. Metals are also ductile and tough because the ions can slip.
- 80How do metals behave for small strains? What constitutes small strains?Metals behave elastically for small strains, that is, strains of around 0.1%
- 81Why do they behave like this up to this point?The metal extends because the spacing between the positive ions increase because stretching a metal pulls bonds apart. When the tensile force is removed, the metal returns to its original length.
- 82What are polymers such as polythene?Long-chained molecules that can extend elastically up to about 1% strains.
- 83Why is polythene very 'floppy'?Polythene is very 'floppy' because it is free to rotate about its bonds.
- 84What are these bonds? What does this mean? What macroscopic properties does this give polythene?These bonds are strong, so although they can rotate they are difficult to break; this gives polythene the macroscopic properties of strength and flexibility.
- 85What is polythene?Polythene is a long, flexible chain molecule that folds up.
- 86What can stretching do?Stretching can rotate some bonds, making the folded chain longer.
- 87Are all polymers flexible? Why?Not all polymers are flexible; they can be stiff if the rotation or unfolding of the chains of molecules is difficult.
- 88What does adding cross-linkages do? What can not happen at cross-linkages?Adding cross-linkages- where polymer chains are tied together at regular intervals along the chains, produces a stiffer material. Cross-linkages are points at which the molecule chains cannot rotate.
- 89What is natural rubber?Natural rubber is a runny white liquid of limited uses.
- 90What was invented in 1839?The process of vulcanisation of rubber
- 91What happens in this process?In this process, natural rubber is heated with sulfur. The sulfur atoms form cross-links with the polymer chains.
- 92What happens if you add more sulfur?The more sulfur you add, the more cross-links form and the stiffer the rubber.
- 93What does controlling the microscopic structure of the material allow?Controlling the microscopic structure of the material allows control of its macroscopic properties.
- 94What does the technique of vulcanisation mean?The technique of vulcanisation means that rubber can be chemically adapted for uses including tyres and shock absorbers.
- 95What does the microscopic structure of unstretched, vulcanised rubber look like?In unstretched, vulcanised rubber, the chains meander randomly between sulfur cross-links (see diagram).
- 96What does the microscopic structure of stretched, vulcanised rubber look like?In stretched, vulcanised rubber, the chain bonds rotate and chains follow straighter paths between cross-links. (see diagram)
- 97What happens when this stretched rubber is released?When released, the chains fold up again and the rubber contracts.
- 98What is the elastic extensibility of rubber?> 100%.
- 99What is polythene?Polythene is semicrystalline.
- 100What is the microscopic structure of unstretched polythene?There is a crystalline region where the chains line up, and an amorphous regions where the chains of molecules fold randomly (see diagram).
- 101What is the microscopic structure of plastically stretched polythene? What also happens to the macroscopic structure?When polythene is stretched plastically, a thin crystalline strip is 'pulled out' of the wider region, meaning there is a new crystalline region. More of the material has lined up molecule chains, meaning more of it is crystalline.
Necking also occurs. (see diagram). - 102What is the plastic extensibility of polythene?> 100%.
Information
- Description
- AS - Level Physics (AS) Flashcards on Chapter 5: Looking Inside Materials, created by Matt Clancy on 13/04/2016.
- Created by
- Matt Clancy
- Views
- 1
- Rating