Mind map
DHCP
Map content
DHCP
Introducing DHCPv4
- DHCPv4 assigns IPv4 addresses and other network configuration information dynamically.
- DHCPv4 assigns IPv4 addresses and other network configuration information dynamically.
DHCPv4 Operation
- Lease Origination
- DHCP Discover (DHCPDISCOVER)
- DHCP Offer (DHCPOFFER)
- DHCP Request (DHCPREQUEST)
- DHCP Acknowledgment (DHCPACK)
- Lease Renewal
- DHCP Request (DHCPREQUEST)
- DHCP Acknowledgment (DHCPACK)
- Lease Origination
DHCPv4 Message Format
- Operation (OP) Code
- Hardware Type
- Hardware Address Length
- Hops
- Transaction Identifier
- Seconds
- Flags
- Client IP Address
- Your IP Address
- Server IP Address
- Gateway IP Address
- Client Hardware Address
- Server Name
- Boot Filename
- DHCP Options
Configuring a Basic DHCPv4 Server
- Step 1. Excluding IPv4 Addresses
- Step 2. Configuring a DHCPv4 Pool
- Step 3. Configuring Specific Tasks
DHCPv4 Relay
- In a complex hierarchical network, enterprise servers are usually located in a server farm. These servers may provide DHCP, DNS, TFTP, and FTP services for the network.
Troubleshooting Tasks DHCPv4
- Troubleshooting Task 1: Resolve IPv4 Address Conflicts
- Troubleshooting Task 2: Verify Physical Connectivity
- Troubleshooting Task 3: Test Connectivity using a Static IP Address
- Troubleshooting Task 4: Verify Switch Port Configuration
- Troubleshooting Task 5: Test DHCPv4 Operation on the Same Subnet or VLAN
Stateless Address Autoconfiguration (SLAAC)
Configuring a Router as a Stateful DHCPv6 Server
- Step 1. Enable IPv6 Routing
- Step 2. Configure a DHCPv6 Pool
- Step 3. Configure Pool Parameters
- Step 4. Interface Commands
Troubleshooting Tasks DHCPv6
- Troubleshooting Task 1: Resolve Conflicts
- Troubleshooting Task 2: Verify Allocation Method
- Troubleshooting Task 3: Test with a Static IPv6 Address
- Troubleshooting Task 4: Verify Switch Port Configuration
- Troubleshooting Task 5: Test DHCPv6 Operation on the Same Subnet or VLAN
Verify Router DHCPv6 Configuration
- Stateful DHCPv6
- Stateless DHCPv6
Debugging DHCPv6
- When the router is configured as a stateless or stateful DHCPv6 server, the debug ipv6 dhcp detail command is useful to verify the receipt and transmission of DHCPv6 messages.
Images and files in the map
Information
- Description
- Mind Map on DHCP, created by JAVIER ARCE TIBADUISA on 11/11/2019.
- Created by
- JAVIER ARCE TIBADUISA
- Views
- 2
- Rating
More on DHCP and address allocation