Mind map
Imaging
Map content
Imaging
X-rays
- Continuous spectrum
- Characteristic peaks
- Bombarding electrons can knock an electron out of an inner shell (if it has sufficient energy). Electrons from higher states drop down to fill the vacancy, emitting x-ray photons with precise energies determined by the electron energy levels = characteristic x-rays
- Depends on anode material
- Depends on accelerating voltage
- Characteristic peaks
- Interactions
- Compton Effect
- Scattered photon changes direction with a longer wavelength (lower energy), as most of the incident photon energy is transferred to an electron
- 10 keV -1 MeV
- Photoelectric Effect
- All photon energy is transferred to the electron
- < 10 keV
- Pair production
- All photon energy is transformed into mass energy and kinetic energy of an electron and positron
- > 1 MeV
- Compton Effect
- Production of X-rays
- 1. Electrons produced by heating of the cathode (-)
- 2. Accelerated towards the anode by a potential difference of 10-100 keV
- 3. Electrons interact with atoms in the anode to produce X-rays
- 4. Evacuated tube (no air molecules to interact with X-rays)
- 5. Electrons are accelerated due to electric field of nuclei in the anode
- 6. Electrons are decelerated around the nucleus, producing Bremsstrahlung ("braking") radiation
- Close to nucleus = high braking = high energy Far from nucleus = low braking = low energy
- Range of photon energies
- Close to nucleus = high braking = high energy Far from nucleus = low braking = low energy
- Keeping the Anode cool
- Bevelled edge
- Tungsten = good thermal conductor, high melting point
- Continuous spectrum
Single Photon Emission CT
- Uses injected radioisotopes
Positron Emission Tomography (PET)
- Positron emitters used to label molecules which are to be introduced into the body
MAXIMUM Contrast
- Low X-ray energy
- Reduces Compton scattering
- Greater difference between attenuation coefficients
- Higher probability of photons being absorbed
- C = I1 - I2 / I1
- I/Io = e-^(ux)
- Low X-ray energy
Attenuation
- High attenuation coefficient = More absorption and scattering
- Bone = high attenuation Water = low attenuation
MAXIMUM Resolution
- Bevelled edge on anode
- Minimise area of bevelled edge to reduce penumbra, achieving crisper shadows
- Grid
- Filters Compton scattered X-rays before reaching the film
- Bevelled edge on anode
MINIMUM Dose
- Aluminium Absorber
- Reduces useless low energy photons
- Increase distance to X-ray source
- Collimator
- Produces in-phase X-rays by focusing beam
- Aluminium Absorber
Computed Tomography (CT)
- Deduces a cross-sectional attenuation map, by comparing intensities along a line
Angiography
- Assisted attenuation coeffcients
- Iodine-rich compound increases attenuation of blood
- Barium meal to the digestive system
- Assisted attenuation coeffcients
Information
- Description
- Mind Map on Imaging, created by Micaela Sood on 01/11/2013.
- Created by
- Micaela Sood
- Views
- 18
- Rating