GoConqr has a new look! Let us know what you think.

Notes

LOAD AND ANGLE FACTORS WHEN SLINGING

peter.roberts English 1 page 1,333 views

THE SWL OR SAFE WORKING LOAD OF A SLING IS THE MAXIMUM LOAD THAT CAN BE LIFTED BY THAT SLING MAKING A STRAIGHT LIFT.SO…

Content of the notes (1)

Page 1

THE SWL OR SAFE WORKING LOAD OF A SLING IS THE MAXIMUM LOAD THAT CAN BE LIFTED BY THAT SLING MAKING A STRAIGHT LIFT.

SO... THE LOAD FACTOR FOR A STRAIGHT LIFT = 1

THE SWL OR SAFE WORKING LOAD OF A SLING IS THE MAXIMUM LOAD THAT CAN BE LIFTED BY THAT SLING MAKING A STRAIGHT LIFT.SO…

IF THE LIFT IS NOT A STRAIGHT LIFT AND MULTIPLE SLINGS ARE USED OR, THE LOAD IS REEEVED, THE SLINGING GEAR ARE SUBJECTED TO A CHANGE IN THEIR CAPACITY TO LIFT

IN ORDER TO COMPENSATE FOR THESE CHANGES WE HAVE TO CHANGE THE SWL OF THE GEAR.

WE DO THIS BY MULTIPLYING THE SWL OF THE SLINGING GEAR BY THE LOAD FACTOR APPROPRIATE TO THE SLING SETUP

IF THE LIFT IS NOT A STRAIGHT LIFT AND MULTIPLE SLINGS ARE USED OR, THE LOAD IS REEEVED, THE SLINGING GEAR ARE SUBJECTED TO…

CONSIDER THE RECTANGULAR LOAD ABOVE.

If a blue sling synthetic sling was used with a WLL of 8T then that lift capacity would be halved and become 4T because of the square reeve load factor of .5

SWL = (WLL/Angle Factor)

Basket hitches simply cradle the load without a reeve (eor loop) around the load.

The Load Factor for a basket hitched round load is 2 as long as there is a no angle in the sling.

For a rectangular load it is 1 as long as there is no angle in the sling.

Basket hitches simply cradle the load without a reeve (eor loop) around the load. The Load Factor for a basket hitched…

ANGLES PLACE STRESS ON THE SLINGING GEAR.

The greater the angle the greater the stress. The way we counter or mitigate these stresses is by using ANGLE FACTOR figures in our calculations.

There are a number of possible scenarios and an according figure which can be used to ensure that the load is slung safely and within the capacity of the lifting gear.

ANGLES PLACE STRESS ON THE SLINGING GEAR. The greater the angle the greater the stress. The way we counter or mitigate…

Both of the above loads are basket slung and display a load angle.

Imagine that the rectangular load is slung with a 2T green synthetic sling.

Let's say that we measured the angle of the sling to be 30 degrees. The load must now not exceed .97 x 2T.

So capacity of that sling setup (basket hitch) slung with a load angle of 30 degrees is 1.94T

Both of the above loads are basket slung and display a load angle.Imagine that the rectangular load is slung with a 2T…

Both of the above loads are basket slung and display a load angle.Imagine that the rectangular load is slung with a 2T…

NOTE THE ANGLE FACTORS FOR A RANGE OF ANGLES WHEN DIRECTLY SLINGING A LOAD

NOTE THE ANGLE FACTORS TO BE USED WHEN USING AN ENDLESS LOOP TYPE SLING

Single sling

Load factors

basket hitches

angle factor

angle factor 2

Information

Description
Note on LOAD AND ANGLE FACTORS WHEN SLINGING , created by peter.roberts on 08/11/2014.
Created by
peter.roberts
Views
1,333
Rating

Feedback

What is it about?

What do you think of the new look?

How do you like it?