Quiz
Senior Design Chapter 6: Selecting Manufacturing Processes
Questions in this quiz (30)
1Manufacting processes that relate to surface treatments such as polishin, painting, heat treating and joining are...
- Aprimary
- Bsecondary
- Ctertiary
- Dinitial
2Manufacturing processes that are used to add or to remove geometric features from the basic form are called...
- Aprimary
- Bsecondary
- Ctertiary
- Dinitial
3All of the following are examples of bulk deformation except...
- Aforging
- Brolling
- Cbar drawing
- Dshearing
4Changing the shape or form of the bulk from materials is caused by compressive or tensile yielding is called...
- Acasting
- Bmachining
- Cdeformation
- Dassembly
5The process in which molten metal is poured into a cast to solidify is called...
- Apolymer processing
- Bcasting
- Cmachining
- Dfinishing
6The process of plasticity compressing material between two halves of die set by hydraulic pressue or the stroke of a hammer is called...
- Acasting
- Bassembly
- Cdeforming
- Dforging
7The process of solidifing molten metal in a ceramic cast made with wax patterns is called...
- Ainvestment casting
- Bdie casting
- Csand casting
- Dpolymter casting
8Which of the following polymer molding methods is used to produce hollow parts with thin walls?
- Ablow casting
- Binjection
- Ccompression
- Dtransfer
9Charge of thermoset or elastometric is formed between heated mold halves under pressure while polymer cure is called...
- Aextrusion
- Binjection molding
- Ccompression molding
- Ddie casting
10Manufacturing very complex shapes including internal and external undercuts is possible using...
- Aextrusion
- Binjection molding
- Ccompression molding
- Dtransfer molding
11Cutting or seporating sheet metal along a straight line is called...
- Ashearing
- Bblanking
- Cdrawing
- Dbending
12Forming plastic indentations to form ribs, beads, or lettering on surface of metal is called...
- Apunching
- Bblanking
- Cshearing
- Dembosing
13Plastic deformation of sheet metal using matched punch and die set is...
- Apunching
- Bblanking
- Cbending
- Dshearing
14Which of the following processes is used to produce products such as soda cans, catridge casings, and pots and pans?
- Adrawing
- Bembosing
- Cblanking
- Dpunching
15Which of the following processes is used to size sheets for subsequent operations...
- Adrawing
- Bshearing
- Cbending
- Dpunching
16Removing material from the workpiece by using a sharp cutting tool that shears away chips of material to create desired form or features is called...
- Amachining
- Bcasting
- Cpolymer processing
- Danodizing
17Which of the following is often used as a secondary process to true up critical dimensions or surfaces or to smooth the surface finish?
- Adeformation
- Bcasting
- Cpolymer process
- Dmachining
18Removal of material from flat surface by using a rotatng cutting tool is called...
- Aplanning
- Bsawing
- Cmilling
- Dgrinding
19Removing material using a translating cutter as a workpiece fieds is called...
- Aplanning
- Bsawing
- Cmilling
- Dgrinding
20Removing material from a translating workpiece and a stationary cutter is called...
- Aplanning
- Bshaping
- Cgrinding
- Dmilling
21Increasing the diameter of an existing hole with a cutting tool by rotating the workpiece is called
- Adrilling
- Bboring
- Creaming
- Dfacing
22The removal of material from a surface using an abrasive spinning wheel is called...
- Aturning
- Bgrinding
- Cshaping
- Dfacing
23Which machining process produces a smoother surface?
- Adrilling
- Bboring
- Cturning
- Dmilling
24Handling actions, during assembly, include all of the following except...
- Amoving
- Borienting
- Cplacing
- Dshipping
25Manufacturing costs include all of the following except...
- Amaterials
- Bshipping
- Cprocessing
- Dtooling
26Structural steel shapes result from rolling...
- Ablooms
- Bslabs
- Csheets
- Dbillets
27Bar and rod shapes result from rolling...
- Abillets
- Bblooms
- Cslabs
- Dsheet
28Processing costs per part is proportional to...
- Atooling costs
- Bmaterial costs
- Ccycle time
- Drecycle time
29Tooling costs per part is reduced by...
- Aincreasing the cycle time
- Bincreasing the run quantity
- Cdecreasing the material wastes
30Manufacturing costs shuold be minimized by reducing...
- Amaterial costs
- Btooling costs
- Cprocessing costs
- Dtotal costs
Information
- Description
- Senior Design Chapter 6: Selecting Manufacturing Processes
- Author
- nep2112
- Language
- English
- Views
- 160
- Tags
- Rating
- No ratings yet Rate this quiz