Quiz
test
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (20)
1in the picture how does the pulleys rotate?

- Asame direction
- Bopposite direction
2A method of transmitting motion from a shaft at right angles to another, by means of guide-pulleys. There are three of these pulleys, side by side, one for each leaf of the belt. Is this correct?

- ATrue
- BFalse
3it is known as :

- Aenglish bartons
- Bspanish bartons
- Citalian bartons
- Denglish pulleys
4which of these are in the correct definition

- AA method of engaging, disengaging, and reversing the upright shaft at the left.
- BSpeed-pulleys used for lathes and other mechanical tools
- CWhen the belt is traversed on the left-hand pulley, which is fast on the hollow shaft, b, carrying the bevel-gear, B, motion is communicated in one direction to the upright shaft
- DOne end of the rope being fixed, the other must move twice as fast as the weight.
5 Represents what are known as White’s pulleys, the diameters being made in proportion to the speed of the rope; that is, 2, 3, and 5 for one block, and 3, 4, and 8 for the other. Power as 1 to 9

- ATrue
- BFalse
6which is the correct definition?

- AComplex pulley used for lifting weights. In this the power must be equal to the weight to obtain equilibrium.
- BSimple pulley used for lifting weights. In this the power must be equal to the weight to obtain equilibrium.
- CSimple pulley used for lifting weights. In this the power must be diferent to the weight to obtain equilibrium.
7Are different arrangements of pulleys. The following rule applies to these pulleys:—In a system of pulleys where each pulley is embraced by a cord attached at one end to a fixed point and at the other to the center of the movable pulley, the effect of the whole will be = the number 2, multiplied by itself as many times as there are movable pulleys in the system. --------Which of these images have this definition
- A21

- B6

- C20

- D7

- A21
8which is the correct definition?

- AIs a combination of two fixed pulleys and three movable pulley.
- BIs a combination of two fixed pulleys and one movable pulley.
- CIs a combination of three fixed pulleys and one movable pulley.
9Is a modification of 11 the pulleys being of different shape.

- ATrue
- BFalse
10By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.

- ATrue
- BFalse
11In this the lower pulley is movable. One end of the rope being fixed, the other must move twice as fast as the weight, and a corresponding gain of power is consequently effected

- ATrue
- BFalse
12which is the definition of this image

- AResembles 1, with the addition of a movable tightening pulley, B. When this pulley is pressed against the band to take up the slack, the belt transmits motion from one of the larger pulleys to the other; but when it is not, the belt is so slack as not to transmit motion.
- BSpeed-pulleys used for lathes and other mechanical tools, for varying the speed according to the work operated upon.
- CA method of transmitting motion from a shaft at right angles to another whose axis is in the same plane. This is shown with a crossed belt. An open belt may be used, but the crossed one is preferable, as it gives more surface of contact.
13A contrivance for transmitting rotary motion to a movable pulley. The pulley at the bottom of the figure is the movable one; if this pulley were raised or depressed, the pulley would be slackened or tightened accordingly.

- ATrue
- BFalse
14Blocks and tackle. The power obtained by this contrivance is calculated as follows: Divide the weight by double the number of pulleys in the lower block; the quotient is the power required to balance the weight.

- ATrue
- BFalse
15its equal than 1 in the substitution of a crossed belt for the open one, but this case the direction of rotation of the pulleys is reversed. By arranging three pulleys, side by side, upon the shaft to be driven, the middle one fast and the other two loose upon it, and using both an open and a crossed belt, the direction of the said shaft is enabled to be reversed without stopping or reversing the driver.
- ATrue
- BFalse
1619, 20, 21 and 22. Are different arrangements of pulleys. The following rule applies to these pulleys:—In a system of pulleys where each pulley is embraced by a cord attached at one end to a fixed point and at the other to the center of the movable pulley, the effect of the whole will be = the number 2, multiplied by itself as many times as there are movable pulleys in the system

- ATrue
- BFalse
17Speed-pulleys used for lathes and other mechanical tools, for varying the speed according to the work operated upon.

- ATrue
- BFalse
18what you have to do to calculate the obtained power?
- ADivide the weight by double the number of pulleys in the lower block; the quotient is the power required to balance the weight.
- Bmultiply the weight by double the number of pulleys in the lower block; the product is the power required to balance the weight.
19 Another method of effecting the same result as 3, without guide-pulleys

- ATrue
- BFalse
2016 and 17. Are what are known as Spanish belts.
- ATrue
- BFalse
Information
- Description
- 3º de ESO Tecnología Quiz on test, created by Alvaro munoz on 06/11/2021.
- Author
- Alvaro munoz
- Language
- Español
- Views
- 25
- Tags
- Rating
- No ratings yet Rate this quiz
More on Gears, Pulleys and Belt Drives