EtherChannel and Link Aggregation
21 resources created by 16 users
This EtherChannel and Link Aggregation page on GoConqr gathers community-made quizzes, mind maps, flashcards and notes on bundled links, protocols and configuration. It supports university students and professional candidates practicing EtherChannel questions, as well as teachers looking for study material. There are over 20 resources, including a few quizzes and mind maps, with material for university and professional study. Start with a resource that matches what you want to practice.
EtherChannel and Link Aggregation
- All Switching, VLANs and Spanning Tree resources
- Circuit and Packet Switching7
- Ethernet Switching Fundamentals36
- Hierarchical Network Design20
- Switch Configuration and Administration15
- VLANs25
- VLAN Trunking and VTP22
- Inter-VLAN Routing7
- Spanning Tree Protocol56
- LAN Security and Switch Hardening23
- First-Hop Redundancy Protocols11
- SPAN and RSPAN6
Top EtherChannel and Link Aggregation resources
-
39 questionsSB&W: Exam CH 3 & 4 When a range of ports is being configured for EtherChannel by the use of PAgP, which mode will form the bun...
-
21 questionsCCNA 3v5.03 Chapter 3 The trunk link between two 2960 switches has reached its capacity. How can this be addressed in the most ec...
-
26 cardsCCNA Comprehensive Fast Ethernet and Gigabit Ethernet can be bundled to form an EtherChannel A. True B. False
-
23 cardsE3_3 EtherChannel Link aggregation Is the ability to create one logical link using multiple physical links between two device...
-
63 cards1.5 Configure and verify EtherChannels What are the purpose of etherchannels?
-
36 cardsChapter 10: Aggregating Switch Links What is the throughput of FastEthernet, GigaEthernet and 10-GigaEthernet?
-
27 cardsEtherchannel and STP What is an etherchannel?
-
5 questionsCCNA – EtherChannel QUESTION NO: 286 Refer to the exhibit. A network administrator is configuring an EtherChannel between SW1 a...
Quizzes
-
39 questionsSB&W: Exam CH 3 & 4 When a range of ports is being configured for EtherChannel by the use of PAgP, which mode will form the bun...
-
21 questionsCCNA 3v5.03 Chapter 3 The trunk link between two 2960 switches has reached its capacity. How can this be addressed in the most ec...
-
5 questionsCCNA – EtherChannel QUESTION NO: 286 Refer to the exhibit. A network administrator is configuring an EtherChannel between SW1 a...
-
10 questionsSwitching 2 Rapid Spanning Tree Protocol is governed by the following standard:
-
4 questionsCCNA-1 Assuming the default switch configuration, which VLAN range can be added, modified, and removed on a Cisco ...
Mind maps
-
85 nodesCCNA 2 - Capitulo 6 ETHERCHANNEL
-
45 nodesCCNA 2 - Capitulo 6.1 ETHERCHANNEL
-
36 nodes6. EtherChannel EtherChannel Operation · Francisco Vaca Silva · Configure EtherChannel · Verify and troublesho...
-
3 nodesEtherChannel Layer 2 EtherChannel · Layer 3 EtherChannel
-
19 nodes2.1.e Implement and troubleshoot EtherChannel 2.1.e [iv] Etherchann... · 2.1.e [ii] Layer 2, l... · 2.1.e [i] LACP, PAgP,... · 2.1.e [iii] Load-bala... · Cisco switches suppor... · Same speed and duplex...
-
6 nodesEtherchannel PAGP · LACP · Static · IEEE 802.3ad
Flashcards
-
26 cardsCCNA Comprehensive Fast Ethernet and Gigabit Ethernet can be bundled to form an EtherChannel A. True B. False
-
23 cardsE3_3 EtherChannel Link aggregation Is the ability to create one logical link using multiple physical links between two device...
-
63 cards1.5 Configure and verify EtherChannels What are the purpose of etherchannels?
-
36 cardsChapter 10: Aggregating Switch Links What is the throughput of FastEthernet, GigaEthernet and 10-GigaEthernet?
-
27 cardsEtherchannel and STP What is an etherchannel?
-
6 cardsEtherChannel Everything here is regarding EtherChannel
Notes
-
EtherChannel Tutorial Notes:The Port Aggregation Protocol (PAgP) and Link Aggregation Control Protocol (LACP) facilitate the automatic creation of EtherChannels by exchanging packets between Ethernet interfaces. The Port Aggregation Protoc...
-
Etherchannel (CCNP) - maximum of 8 links - using LACP, we can make links in standby. so 8 links will be active and others will be in standby- LACP will have master slave selection- master will decide which ports will be active and which ...
-
Port channel PAgP: between cisco devicesmodes:1) On: no negotiation/force the channel2) Desirable: Sends PAgp initiation msgs3) Auto: Passively listens to PAgp msgsLACP(802.3ad)modes:1) on: 2) active: send LACP initiation msgs3) p...
Slides
More Switching, VLANs and Spanning Tree topics
About EtherChannel and Link Aggregation
GoConqr OriginalStart with the basics
The flashcard deck on EtherChannel introduces link aggregation as a way to create a logical link from multiple physical links. Start there if you want a short prompt about the idea before moving on to configuration questions. The deck also raises load sharing and the relationship with spanning tree.
Next, open EtherChannel Tutorial. Its notes introduce PAgP and LACP and describe how they use packets exchanged between Ethernet interfaces to help create EtherChannels automatically. Read the notes alongside the flashcards, then return to the cards and see which ideas you can explain without looking.
Move from maps to questions
The mind map on implementing and troubleshooting EtherChannel brings several ideas together, including LACP, PAgP, manual configuration, load balancing and misconfiguration guard. Use it to organize the terms you have seen in the notes. You can return to a branch when a question brings up a term you want to check.
Then try CCNA – EtherChannel. Its questions include a configuration scenario involving switches. Another listed quiz asks about the PAgP mode used when configuring a range of ports. After attempting a question, use the map and notes to review the relevant terms before trying again.
Explore the wider unit
This topic sits within a wider unit in Networks and telecommunications. Some resources on this page connect EtherChannel with switching and spanning tree, so they offer a way to see the topic in that broader setting. The listed switching quiz, for example, includes questions on spanning tree and Ethernet frame tags as well as EtherChannel.
For more question-based practice, use CCNA Comprehensive, whose flashcards ask about bundled Ethernet links, PAgP and link types. Choose a quiz or map and work through it at your own pace.
Frequently asked questions
Which resource should I start with?
The flashcard deck on EtherChannel is a useful starting point for the idea of combining physical links into a logical link. Follow it with EtherChannel Tutorial for notes on PAgP and LACP. When you are ready for a configuration scenario, try the CCNA – EtherChannel quiz.
What does the EtherChannel troubleshooting mind map cover?
The mind map on implementing and troubleshooting EtherChannel includes LACP, PAgP, manual configuration, load balancing and misconfiguration guard. You can use it alongside EtherChannel Tutorial to organize the terms from the notes, then return to it when a quiz question raises a term you want to review.
Are the listed resources free to use?
Yes. Every resource listed on this page is free to open, study and take without an account. The resources were made by GoConqr users. A free account also lets you save quiz scores and make your own quizzes, mind maps, flashcards and notes.