¡GoConqr estrena diseño! Cuéntanos qué te parece.

Fichas

Materials Lecture 9+2

Luke Hansford Materials Uni Inglés 13 fichas

Materials Lecture 9+2

Fichas del conjunto (13)

  1. 1What are wind turbine blades made from?Glass and carbon fibre composites
  2. 2How much des air transport contribute to climate change?5% of all human indued greenhouse gases and 12% of all transport sources
  3. 3How many premature moralities are there in the UK per year due to combustion emissions?1800 due to airports and marine ports
  4. 4What targets are looking to be met in the aviation?50% reduction in fuel consumption and CO2 emissions per passenger kilometre compared to 2000
    Substantial progress in reducing environmental impact during manufacture, maintenance of aircrafts and components.
  5. 5What is the LCA?Life cycle assessment
  6. 6What is the purpose of the LCA?Assesses environmental impacts such as embodied energy and CO2 footprint associated with all the stages of a products life.
    CRADLE TO GRAVE
  7. 7Which steps is it likely to include?Raw material extraction
    Material Processing
    Transport
    Manufacture
    In service use
    Maintenance
    Recycling
  8. 8Why might carbon fibre composites be preferred for turbine blades over titanium if we are considering energy?Titanium requires mine extraction, chemical treatment and melting above 1668˚C which is a very high energy demand.
    If forming is required then large amounts of energy are needed to hot/cold roll forge etc...
  9. 9Why else may carbon fibre be preferred?High specific mechanical properties such as Youngs Modulus and Yield Strength
  10. 10Why is lower weight turbine blades an advantage?Lighter aircraft more efficient
    Allows use of lower engine casing weight reducing overall weight of engine.
  11. 11What is a large environmental issue with carbon fibres?They are not recyclable into high performance uses
  12. 12What happens to the fibres after incineration?Poor fibre alignment, short aspect ratio (length to diameter ratio)What happens to the fibres after incineration?
  13. 13What is the cycle of recycling carbon fibres?Incineration, dispersion in water, short recycled carbon fibre flow aligned, then put through a vacuumWhat is the cycle of recycling carbon fibres?

Información

Descripción
Uni Materials Fichas sobre Materials Lecture 9+2, creado por Luke Hansford el 10/04/2016.
Creado por
Luke Hansford · abr 2016
Actualizado
18 may 2016
Visitas
1
Valoración

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué te parece el nuevo diseño?

¿Te gusta?