Test
Set A
Este test tiene tipos de pregunta que se abren en el reproductor de siempre.
Preguntas del test (83)
1Which of the following statements describe a valid test objective?
- ATo prove that there are no unfixed defects in the system under tes
- BTo prove that there will be no failures after the implementation of the system into production
- CTo reduce the risk level of the test object and to build confidence in the quality level
- DTo verify that there are no untested combinations of inputs
2Which of the following options shows an example of test activities that contribute to success?
- AHaving testers involved during various software development lifecycle (SDLC) activities will
help to detect defects in work products - BTesters try not to disturb the developers while coding, so that the developers write better
code - CTesters collaborating with end users help to improve the quality of defect reports during
component integration and system testing - DCertified testers will design much better test cases than non-certified testers
- AHaving testers involved during various software development lifecycle (SDLC) activities will
3You have been assigned as a tester to a team producing a new system incrementally. You have
noticed that no changes have been made to the existing regression test cases for several iterations
and no new regression defects were identified. Your manager is happy, but you are not. Which
testing principle explains your skepticism?- ATests wear out
- BAbsence-of-errors fallacy
- CDefects cluster together
- DExhaustive testing is impossible
4You work in a team that develops a mobile application for food ordering. In the current iteration the
team decided to implement the payment functionality.
Which of the following activities is a part of test analysis?- AEstimating that testing the integration with the payment service will take 8 person-days
- BDeciding that the team should test if it is possible to properly share payment between many users
- CUsing boundary value analysis (BVA) to derive the test data for the test cases that check
the correct payment processing for the minimum allowed amount to be paid - DAnalyzing the discrepancy between the actual result and expected result after executing a
test case that checks the process of payment with a credit card, and reporting a defect
5Which of the following factors (i-v) have SIGNIFICANT influence on the test process?
i. The SDLC
ii. The number of defects detected in previous projects
iii. The identified product risks
iv. New regulatory requirements forcing
v. The number of certified testers in the organization- Ai, ii have significant influence; iii, iv, v have not
- Bi, iii, iv have significant influence; ii, v have not
- Cii, iv, v have significant influence; i, iii have not
- Diii, v have significant influence; i, ii, iv have not
6Which TWO of the following tasks belong MAINLY to a testing role?
- AConfigure test environments
- BMaintain the product backlog
- CDesign solutions to new requirements
- DCreate the test plan
- EReport on achieved coverage
7Which of the following skills (i-v) are the MOST important skills of a tester?
i. Having domain knowledge
ii. Creating a product vision
iii. Being a good team player
iv. Planning and organizing the work of the team
v. Critical thinking- Aii and iv are important; i, iii and v are not
- Bi, iii and v are important; ii and iv are not
- Ci, ii and v are important; iii and iv are not
- Diii and iv are important; i, ii and v are not
8How is the whole team approach present in the interactions between testers and business
representatives?- ABusiness representatives decide on test automation approaches
- BTesters help business representatives to define test strategy
- CBusiness representatives are not part of the whole team approach
- DTesters help business representatives to create suitable acceptance tests
9Consider the following rule: “for every SDLC activity there is a corresponding test activity”. In which
SDLC models does this rule hold?- AOnly in sequential SDLC models
- BOnly in iterative SDLC models
- COnly in iterative and incremental SDLC models
- DIn sequential, incremental, and iterative SDLC models
10Which of the following statements BEST describes the acceptance test-driven development (ATDD)
approach?- AIn ATDD, acceptance criteria are typically created based on the given/when/then format
- BIn ATDD, test cases are mainly created at component testing and are code-oriented
- CIn ATDD, tests are created, based on acceptance criteria to drive the development of the
related software - Din ATDD, tests are based on the desired behavior of the software, which makes it easier for
team members to understand them
11Which of the following is NOT an example of the shift left approach?
- AReviewing the user requirements before they are formally accepted by the stakeholders
- BWriting a component test before the corresponding code is written
- CExecuting a performance efficiency test for a component during component testing
- DWriting a test script before setting up the configuration management process
12Which of the arguments below would you use to convince your manager to organize retrospectives
at the end of each release cycle?- ARetrospectives are very popular these days and clients would appreciate it if we added them
to our processes - BOrganizing retrospectives will save the organization money because end user
representatives do not provide immediate feedback about the product - CProcess weaknesses identified during the retrospective can be analyzed and serve as a to
do list for the organization’s continuous process improvement program - DRetrospectives embrace five values including courage and respect, which are crucial to
maintain continuous improvement in the organization
- ARetrospectives are very popular these days and clients would appreciate it if we added them
13Which types of failures (1-4) fit which test levels (A-D) BEST?
1. Failures in system behavior as it deviates from the user’s business needs
2. Failures in communication between components
3. Failures in logic in a module
4. Failures in not correctly implemented business rules
A. Component testing
B. Component integration testing
C. System testing
D. Acceptance testing- A1D, 2B, 3A, 4C
- B1D, 2B, 3C, 4A
- C1B, 2A, 3D, 4C
- D1C, 2B, 3A, 4D
14image
- AOnly 4, 7, 8, 9
- BOnly 5, 7
- COnly 4, 6, 8, 9
- DOnly 5, 6
15Which of the following is NOT a benefit of static testing?
- AHaving less expensive defect management due to the ease of detecting defects later in the
SDLC - BFixing defects found during static testing is generally much less expensive than fixing defects
found during dynamic testing - CFinding coding defects that might not have been found by only performing dynamic testing
- DDetecting gaps and inconsistencies in requirements
- AHaving less expensive defect management due to the ease of detecting defects later in the
16Which of the following is a benefit of early and frequent feedback?
- AIt improves the test process for future projects
- BIt forces customers to prioritize their requirements based on agreed risks
- CIt is the only way to measure the quality of changes
- DIt helps avoid requirements misunderstandings
17q
- AInformal review
- BWalkthrough
- CTechnical review
- DInspection
18Which of these statements is NOT a factor that contributes to successful reviews?
- AParticipants should dedicate adequate time for the review
- BSplitting large work products into small parts to make the required effort less intense
- CParticipants should avoid behaviors that might indicate boredom, exasperation, or hostility to
other participants - DFailures found should be acknowledged, appreciated, and handled objectively
19Which of the following is a characteristic of experience-based test techniques?
- ATest cases are created based on detailed design information
- BItems tested within the interface code section are used to measure coverage
- CThe techniques heavily rely on the tester’s knowledge of the software and the business
domain - DThe test cases are used to identify deviations from the requirements
20You are testing a simplified apartment search form which has only two search criteria:
• floor (with three possible options: ground floor; first floor; second or higher floor)
• garden type (with three possible options: no garden; small garden; large garden)
Only apartments on the ground floor may have gardens. The form has a built-in validation
mechanism that will not allow you to use the search criteria which violate this rule.
Each test has two input values: floor and garden type. You want to apply equivalence partitioning
(EP) to cover each floor and each garden type in your tests.
What is the minimal number of test cases to achieve 100% EP coverage?- A3
- B4
- C5
- D6
21q
- A50%
- B60%
- C33.3%
- D100%
22Based ONLY on the feature description of the Customer Relationship Management system, which
of the above rules describes an impossible situation?
- AR4
- BR2
- CR6
- DR8
23Q
- A4
- B2
- C7
- D3
24Your test suite achieved 100% statement coverage. What is the consequence of this fact?
- AEach instruction in the code that contains a defect has been executed at least once
- BAny test suite containing more test cases than your test suite will also achieve 100%
statement coverage - CEach path in the code has been executed at least once
- DEvery combination of input values has been tested at least once
25Which of the following is NOT true for white-box testing?
- ADuring white-box testing the entire software implementation is considered
- BWhite-box coverage metrics can help identify additional tests to increase code coverage
- CWhite-box test techniques can be used in static testing
- DWhite-box testing can help identify gaps in requirements implementation
26Which of the following BEST describes the concept behind error guessing?
- AError guessing involves using your knowledge and experience of defects found in the past
and typical errors made by developers - BError guessing involves using your personal experience of development and the errors you
made as a developer - CError guessing requires you to imagine that you are the user of the test object and to guess
errors the user could make interacting with it - DError guessing requires you to rapidly duplicate the development task to identify the sort of
errors a developer might make
- AError guessing involves using your knowledge and experience of defects found in the past
27In your project there has been a delay in the release of a brand-new application and test execution
started late, but you have very detailed domain knowledge and good analytical skills. The full list of
requirements has not yet been shared with the team, but management is asking for some test results
to be presented.
Which test technique fits BEST in this situation?- AChecklist-based testing
- BError guessing
- CExploratory testing
- DBranch testing
28Which of the following BEST describes the way acceptance criteria can be documented?
- APerforming retrospectives to determine the actual needs of the stakeholders regarding a
given user story - BUsing the given/when/then format to describe an example test condition related to a given
user story - CUsing verbal communication to reduce the risk of misunderstanding the acceptance criteria
by others - DDocumenting risks related to a given user story in a test plan to facilitate the risk-based
testing of a given user story
- APerforming retrospectives to determine the actual needs of the stakeholders regarding a
29Consider the following user story:
As an Editor
I want to review content before it is published
so that I can assure the grammar is correct
and its acceptance criteria:
• The user can log in to the content management system with "Editor" role
• The editor can view existing content pages
• The editor can edit the page content
• The editor can add markup comments
• The editor can save changes
• The editor can reassign to the "content owner" role to make updates
Which of the following is the BEST example of an ATDD test for this user story?- Atest if the editor can save the document after deleting the page content
- Btest if the content owner can log in and make updates to the content
- Ctest if the editor can schedule the edited content for publication
- Dtest if the editor can reassign to another editor to make updates
30How do testers add value to iteration and release planning?
- ATesters determine the priority of the user stories to be developed
- BTesters focus only on the functional aspects of the system to be tested
- CTesters participate in the detailed risk identification and risk assessment of user stories
- DTesters guarantee the release of high-quality software through early test design during the
release planning
31Which TWO of the following options are the exit criteria for testing a system?
- ATest environment readiness
- BThe ability to log in to the test object by the tester
- CEstimated defect density is reached
- DRequirements are translated into given/when/then format
- ERegression tests are automated
32Your team uses the three-point estimation technique to estimate the test effort for a new high-risk
feature. The following estimates were made:
• most optimistic estimation: 2 person-hours
• most likely estimation: 11 person-hours
• most pessimistic estimation: 14 person-hours
What is the final estimate?- A9 person-hours
- B14 person-hours
- C11 person-hours
- D10 person-hours
33q
- ATC 003
- BTC 005
- CTC 002
- DTC 001
34Consider the following test categories (1-4) and agile testing quadrants (A-D):
1. Usability testing
2. Component testing
3. Functional testing
4. Reliability testing
A. Agile testing quadrant Q1: technology facing, supporting the development team
B. Agile testing quadrant Q2: business facing, supporting the development team
C. Agile testing quadrant Q3: business facing, critique the product
D. Agile testing quadrant Q4: technology facing, critique the product
How do the following test categories map onto the agile testing quadrants?- A1C, 2A, 3B, 4D
- B1D, 2A, 3C, 4B
- C1C, 2B, 3D, 4A
- D1D, 2B, 3C, 4A
35During a risk analysis the following risk was identified and assessed:
• Risk: Response time is too long to generate a report
• Risk likelihood: medium; risk impact: high
• Response to risk:
o an independent test team performs performance testing during system testing
o a selected sample of end users performs alpha and beta acceptance testing before the release
What measure is proposed to be taken in response to this analyzed risk?- ARisk acceptance
- BContingency plan
- CRisk mitigation
- DRisk transfer
36Which tool can be used by an agile team to show the amount of work that has been completed and
the amount of total work remaining for a given iteration?- AAcceptance criteria
- BDefect report
- CTest completion report
- DBurndown chart
37You need to update one of the automated test scripts to be in line with a new requirement. Which
process indicates that you create a new version of the test script in the test repository?- ATraceability management
- BMaintenance testing
- CConfiguration management
- DRequirements engineering
38You received the following defect report from the developers stating that the anomaly described in
this test report is not reproducible.
Application hangs up
2022-May-03 – John Doe – Rejected
The application hangs up after entering “Test input: $ä” in the Name field on the new user creation
screen. Tried to log off, log in with test_admin01 account, same issue. Tried with other test admin
accounts, same issue. No error message received; log (see attached) contains fatal error notification.
Based on the test case TC-1305, the application should accept the provided input and create the
user. Please fix with high priority, this feature is related to REQ-0012, which is a critical new business
requirement.
What critical information is MISSING from this test report that would have been useful for the
developers?- AExpected result and actual result
- BReferences and defect status
- CTest environment and test item
- DPriority and severity
39Which test activity does a data preparation tool support?
- ATest monitoring and control
- BTest analysis and design
- CTest implementation and execution
- DTest completion
40Which item correctly identifies a potential risk of performing test automation?
- AIt may introduce unknown regressions in production
- BSufficient efforts to maintain testware may not be properly allocated
- CTesting tools and associated testware may not be sufficiently relied upon
- DIt may reduce the time allocated for manual testing
41You were given a task to analyze and fix causes of failures in a new system to be released.
Which activity are you performing?- ADebugging
- BSoftware testing
- CRequirement elicitation
- DDefect management
42In many software organizations the test department is called the Quality Assurance (QA) department.
Is this sentence correct or not and why?- AIt is correct. Testing and QA mean exactly the same thing
- BIt is correct. These names can be used interchangeably because both testing and QA focus
their activities on the same quality issues - CIt is not correct. Testing is something more; testing includes all activities with regard to quality.
QA focuses on quality-related processes - DIt is not correct. QA is focused on quality-related processes while testing concentrates on
demonstrating that a component or system is fit for purpose and to detect defects
43A phone ringing in a neighboring cubicle distracts a programmer causing him to improperly program
the logic that checks the upper boundary of an input variable. Later, during system testing, a tester
notices that this input field accepts invalid input values.
Which of the following correctly describes an incorrectly coded upper bound?- AThe root cause
- BA failure
- CAn error
- DA defect
44Which test activity produces this testware as an output?
- ATest planning
- Btest monitoring and control
- CTest analysis
- Dtest design
45Which of the following is the BEST example of how traceability supports testing?
- APerforming the impact analysis of a change will give information about the completion of the tests
- BAnalyzing the traceability between test cases and test results will give information about the estimated level of residual risk
- CPerforming the impact analysis of a change will help selecting the right test cases for
regression testing - DAnalyzing the traceability between the test basis, the test objects and the test cases will help in selecting test data to achieve the assumed coverage of the test object
46Which of the following BEST explains a benefit of independence of testing?
- AThe use of an independent test team allows project management to assign responsibility for the quality of the final deliverable to the test team
- BIf a test team external to the organization can be afforded, then there are distinct benefits in terms of this external team not being so easily swayed by the delivery concerns of project management and the need to meet strict delivery deadlines
- CAn independent test team can work separately from the developers, need not be distracted with project requirement changes, and can restrict communication with the developers to defect reporting through the defect management system
- DWhen specifications contain ambiguities and inconsistencies, assumptions are made on their interpretation, and an independent tester can be useful in questioning those assumptions and the interpretation made by the developer
47You are working as a tester in the team that follows the V-model. How does the choice of this
software development lifecycle (SDLC) model impact the timing of testing?- ADynamic testing cannot be performed early in the SDLC
- BStatic testing cannot be performed early in the SDLC
- CTest planning cannot be performed early in the SDLC
- DAcceptance testing can be performed early in the SDLC
48Which of the following are advantages of DevOps?
i. Faster product release and faster time to market
ii. Increases the need for repetitive manual testing
iii. Constant availability of executable software
iv. Reduction in the number of regression tests associated with code refactoring
v. Setting up the test automation framework is inexpensive since everything is
automated- Ai, ii, iv are advantages; iii, v are not
- Biii, v are advantages; i, ii, iv are not
- Ci, iii are advantages; ii, iv, v are not
- Dii, iv, v are advantages; i, iii are not
49You work as a tester in a project on a mobile application for food ordering for one of your clients.
The client sent you a list of requirements. One of them, with high priority, says
“The order must be processed in less than 10 seconds in 95% of the cases”.
You created a set of test cases in which a number of random orders were made, the processing time
measured, and the test results were checked against the requirements.
What test type did you perform?- AFunctional, because the test cases cover the user’s business requirement for the system
- BNon-functional, because the measure the system’s performance
- CFunctional, because the test cases interact with the user interface
- DStructural, because we need to know the internal structure of the program to measure the order processing time
50Your organization’s test strategy suggests that once a system is going to be retired, data migration
shall be tested. As part of what test type is this testing MOST likely to be performed?- AMaintenance testing
- BRegression testing
- CComponent testing
- DIntegration testing
51The following is a list of the work products produced in the SDLC.
i. Business requirements
ii. Schedule
iii. Test budget
iv. Third-party executable code
v. User stories and their acceptance criteria
Which of them can be reviewed?- Ai and iv can be reviewed; ii, iii and v cannot
- Bi, ii, iii and iv can be reviewed; v cannot
- Ci, ii, iii, and v can be reviewed; iv cannot
- Diii, iv, v can be reviewed; i and ii cannot
52Decide which of the following statements (i-v) are true for dynamic testing and which are true for
static testing.
i. Abnormal external behaviors are easier to identify with this testing
ii. Discrepancies from a coding standard are easier to find with this testing
iii. It identifies failures caused by defects when the software is run
iv. Its test objective is to identify defects as early as possible
v. Missing coverage for critical security requirements is easier to find and fix- Ai, iv, v are true for static testing; ii, iii are true for dynamic testing
- Bi, iii, iv are true for static testing; ii, v are true for dynamic testing
- Cii, iii are true for static testing; i, iv, v are true for dynamic testing
- Dii, iv, v are true for static testing; i, iii, iv are true for dynamic testing
53Which of the following statements about formal reviews is TRUE?
- ASome reviews do not require more than one role
- BThe review process has several activities
- CDocumentation to be reviewed is not distributed before the review meeting, with the exception of the work product for specific review types
- DDefects found during the review are not reported since they are not found by dynamic testing
54What task may management take on during a formal review?
- ATaking overall responsibility for the review
- BDeciding what is to be reviewed
- CEnsuring the effective running of review meetings, and mediating, if necessary
- DRecording review information such as review decisions
55A wine storage system uses a control device that measures the wine cell temperature T (measured
in °C, rounded to the nearest degree) and alarms the user if it deviates from the optimal value of
12, according to the following rules:
• if T = 12, the system says, “optimal temperature”
• if T < 12, the system says, “temperature is too low!”
• if T > 12, the system says, “temperature is too high!”
You want to use the 3-point boundary value analysis (BVA) to verify the behavior of the control
device. A test input is a temperature in °C provided by the device.
What is the MINIMAL set of test inputs that achieves 100% of the desired coverage?- A11, 12, 13
- B10, 12, 14
- C10, 11, 12, 13, 14
- D10, 11, 13, 14
56Which of the following statements about branch testing is CORRECT?
- AIf a program includes only unconditional branches, then 100% branch coverage can be
achieved without executing any test cases - BIf the test cases exercise all unconditional branches in the code, then 100% branch coverage is achieved
- CIf 100% statement coverage is achieved, then 100% branch coverage is also achieved
- DIf 100% branch coverage is achieved, then all decision outcomes in each decision statement in the code are exercised
- AIf a program includes only unconditional branches, then 100% branch coverage can be
57You are testing a mobile application that allows customers to access and manage their bank
accounts. You are running a test suite that involves evaluating each screen, and each field on each
screen, against a general list of user interface best practices derived from a popular book on the
topic that maximizes attractiveness, ease-of-use, and accessibility for such applications.
Which of the following options BEST categorizes the test technique you are using?- ABlack-box
- BExploratory
- CChecklist-based
- DError guessing
58Which of the following BEST describe the collaborative approach to user story writing?
- AUser stories are created by testers and developers and then accepted by business
representatives - BUser stories are created by business representatives, developers, and testers together
- CUser stories are created by business representatives and verified by developers and testers
- DUser stories are created in a way that they are independent, negotiable, valuable,
estimable, small, and testable
- AUser stories are created by testers and developers and then accepted by business
59Consider the following part of a test plan.
Testing will be performed using component testing and component integration testing. The
regulations require to demonstrate that 100% branch coverage is achieved for each component
classified as critical.
Which part of the test plan does this part belong to?- ACommunication
- BRisk register
- CContext of testing
- DTest approach
60Which of the following is the BEST example of the next step?
- AThe product owner has to step in and make a final decision
- BAccept 13 as the final test estimate as this has most of the votes
- CNo further action is needed. Consensus has been reached
- DRemove the new feature from the current release because consensus has not been
reached
61Which of the following is NOT true regarding the test pyramid?
- AThe test pyramid emphasizes having a larger number of tests at the lower test levels
- BThe closer to the top of the pyramid, the more formal your test automation should be
- CUsually, component testing and component integration testing are automated using API-based tools
- DFor system testing and acceptance testing, the automated tests are typically created using GUI-based tools
62During risk analysis the team considered the following risk: “The system allows too high a discount
for a customer”. The team estimated the risk impact to be very high.
What can one say about the risk likelihood?- AIt is also very high. High risk impact always implies high risk likelihood
- BIt is very low. High risk impact always implies low risk likelihood
- COne cannot say anything about risk likelihood. Risk impact and risk likelihood are
independent. - DRisk likelihood is not important with such a high-risk impact. One does not need to define it.
63The following list contains risks that have been identified for a new software product to be developed:
i. Management moves two experienced testers to another project
ii. The system does not comply with functional safety standards
iii. System response time exceeds user requirements
iv. Stakeholders have inaccurate expectations
v. Disabled people have problems when using the system
Which of them are project risks?- Ai, iv are project risks; ii, iii, v are not project risks
- Biv, v are project risks; i, ii, iii are not project risks
- Ci, iii are project risks; ii, iv, v are not project risks
- Dii, v are project risks; i, iii, iv are not project risks
64Which of the following is an example of how product risk analysis influences thoroughness and scope
of testing?- AThe test manager monitors and reports the level of all known risks on a daily basis so the stakeholders can make an informed decision on the release date
- BOne of the identified risks was "Lack of support of open-source databases", so the team decided to integrate the system with an open-source database
- CDuring the quantitative risk analysis, the team estimated the total level of all identified risks and reported it as the total residual risk before testing
- DRisk assessment revealed a very high level of performance risks, so it was decided to perform detailed performance efficiency testing early in the SDLC
65Which TWO of the following options are common metrics used for reporting on the quality level of
the test object?- ANumber of defects found during system testing
- BTotal effort on test design divided by the number of designed test cases
- CNumber of executed test procedures
- DNumber of defects found divided by the size of a work product
- ETime needed to repair a defect
66Which of the following pieces of information contained in a test progress report is the LEAST useful
for business representatives- AImpediments to testing
- BBranch coverage achieved
- CTest progress
- DNew risks within the test cycle
67Failure is [blank_start]_________[blank_end]
A. Incorrect program behavior due to a fault in the program
B. Bug found before product Release
C. Bug found after product Release
D. Bug found during Design phase- Aa
- Bb
- Cc
- Dd
68Which of the following can be the root cause of a bug in a software product?
(I) The project had incomplete procedures for configuration management.
(II) The time schedule to develop a certain component was cut.
(III) the specification was unclear
(IV) Use of the code standard was not followed up
(V) The testers were not certified- A(I) and (II) are correct
- B(I) through (IV) are correct
- C(III) through (V) are correct
- D(I), (II) and (IV) are correct
69Which of the following is NOT a reasonable test objective?
- ATo find faults in the software
- BTo give confidence in the software
- CTo find performance problems
- DTo prove that the software has no faults
70Which of the following is true
- ATesting is the same as quality assurance
- BTesting is a part of quality assurance
- CTesting is not a part of quality assurance
- DTesting is the same as debugging
71Which of the following sentences describes one of these basic principles?
- AComplete testing of software is attainable if you have enough resources and test tools
- BWith automated testing, you can make statements with more confidence about the quality of a product than with manual testing
- CFor a software system, it is not possible, under normal conditions, to test all input and
output combinations - DA goal of testing is to show that the software is defect-free.
72A test team consistently finds between 90% and 95% of the defects present in the
system under test.
While the test manager understands that this is a good defect-detection
percentage for her test team and industry, senior management and executives remain
disappointed in the test group, saying that the test team misses too many bugs.
Given that the users are generally happy with the system and that the failures which have occurred
have generally been low impact, which of the following testing principles is most likely to
help the test manager explain to these managers and executives why some defects are
likely to be missed?- AExhaustive testing is impossible
- BAbsence-of-errors fallacy
- CDefect clustering
- DPesticide paradox
73Which activity in the fundamental test process includes evaluation of the testability
of the requirements and system?- ATest design.
- BTest implementation.
- CTest analysis
- DTest control.
74Consider the following list of test process activities:
I. Analysis
II. Test completion
III. Execution
IV. Planning
V. Implementation
Which of the following places these in their logical sequence?- AIV, I, V, II, and III
- BIV, I, V, III, and II
- CI, II, III, IV, and V
- DI, IV, V, III, and II
75Which of the following is most important to promote and maintain good relationships
between testers and developers?- AUnderstanding what managers value about testing
- BPromoting better quality software whenever possible
- CExplaining test results in a neutral fashion
- DIdentifying potential customer workarounds for bugs
76Match the following work products with their corresponding Test process group
(i) Test summary reports
(ii) Change requests
(iii) Test suites
(iv) Defect reports
(w) Test execution
(x) Test implementation
(y) Test monitoring and control
(z) Test completion- Ai-z, ii-z , iii-w, iv-w
- Bi-x, ii-w, iii-z, iv-y
- Ci-y, ii-z, iii-x, iv-w
- Di-w, ii-x , iii-y, iv-z
77Which of the following is true of the V model?
- Aa
- Bb
- Cc
- Dd
78Which of the following combinations correctly describe a valid approach to component testing?
- Aa
- Bb
- Cc
- Dd
79Consider the following statements about regression tests.
- AA
- BB
- CC
- DD
80Which of these is a functional test?
- AA
- BB
- CC
- DD
81Consider the following statements about maintenance testing.
- AA
- BB
- CC
- DD
82 To test a function, the programmer has to write a _________, which calls the
function to be tested and passes it test data.- AStub
- BProxy
- CDriver
- DNone
83 The _______should include operational tests of the new environment as well as of the changed software
- Asystem testing
- Bintegration testing
- Ccomponent testing
- Dmaintenance testing
Información
- Descripción
- https://istqb-main-web-prod.s3.amazonaws.com/media/documents/ISTQB_CTFL_Sample-Exam-Questions_v4.0.pdf https://istqb-main-web-prod.s3.amazonaws.com/media/documents/ISTQB_CTFL_Sample-Exam-Answers_v4.0.pdf
- Autor
- Alyssa Bala
- Idioma
- English
- Visitas
- 246
- Etiquetas
- Valoración
- Aún sin valoraciones Valora este test