ÂĄGoConqr estrena diseĂąo! CuĂŠntanos quĂŠ te parece.

Test

PDD Quiz VIII

a 20 preguntas

Hacer el test

Preguntas del test (20)

  1. 1Which of the following brick veneer wall detail is more likely to belong to a high-rise building?Imagen de la pregunta 1
    1. AOption A
    2. BOption B
    3. CDon't have enough information to answer the question
    4. DBoth of the section can be belong to a maximum 30 feet tall building
  2. 2For applications such as flooring, outdoor decking, baseboards, casings, and panelling, which of the following lumber sawing method should be preferred if the boards must stay flat during their lifetime with a uniform look?
    1. APlain sawn lumber
    2. BQuarter-sawn lumber
    3. CTangential direction
    4. DFlat sawn lumber
  3. 3An architect is reviewing the details of the exterior drainage walls to ensure they provide the best water infiltration control. Which of the following features below should definitely be incorporated in the wall assembly? 𝗖𝗵𝗲𝗰𝗸 𝘁𝗵𝗲 𝘁𝗵𝗿𝗲𝗲 𝘁𝗵𝗮𝘁 𝗮𝗽𝗽𝗹𝘆.
    1. AProvide voids in cladding for pressure equalization in the air space.
    2. BContinuous horizontal and vertical air space surrounding the entire periphery of the building.
    3. CCompartmentalization of the vertical air space between different facades of the building.
    4. DAirtight backup wall to minimize water-infiltration.
    5. ECompletely sealed, air-tight cladding to minimize water infiltration.
  4. 4Which of the following are correct regarding stucco’s material features and application characteristics? 𝗖𝗵𝗲𝗰𝗸 𝘁𝗵𝗲 𝘁𝗵𝗿𝗲𝗲 𝘁𝗵𝗮𝘁 𝗮𝗽𝗽𝗹𝘆
    1. AThe primary element in stucco is gypsum cement.
    2. BThe primary element in stucco is portland cement.
    3. CBefore the invention of portland & gypsum cements, lime was the only cementitious material available for plaster.
    4. DScratch coat and brown coat are two base coatings for stucco applications.
    5. EAn acrylic polymer-based finish coat is more vapor permeable and suitable for moist environments.
  5. 5What are the biggest concerns regarding EIFS applications? 𝗖𝗵𝗲𝗰𝗸 𝘁𝗵𝗲 𝘁𝘄𝗼 𝘁𝗵𝗮𝘁 𝗮𝗽𝗽𝗹𝘆.
    1. AIt does not breathe as well as a portland cement stucco wall, therefore prone to the growth of mold.
    2. BImplementing detailed work and ornamentation on facade is complex.
    3. CIt has low resistance to impact.
    4. DNot energy efficient enough, provides low R value.
    5. EDoes not allow large variety of finish coloring.
  6. 6Which type of glass is more likely to be preferred for spandrel glass?
    1. AHeat-strengthened
    2. BHeat-soaked
    3. CTempered
    4. DAnnealed
  7. 7An architect is designing an office project where the client wants fully operable windows that provide a hundred percent ventilation in office spaces, the main conference room, and the pantry. Which of the following window styles can meet this requirement? 𝘾𝙝𝙚𝙘𝙠 𝙩𝙝𝙚 𝙛𝙤𝙪𝙧 𝙩𝙝𝙖𝙩 𝙖𝙥𝙥𝙡𝙮.
    1. AHopper
    2. BCasement
    3. CPivoting
    4. DDouble Hung
    5. EAwning
    6. FHorizontal Sliding
  8. 8Which of the following curtain wall system requires the longest on-site assembly and on-site labor time?
    1. AStick-built system
    2. BUnit and mullion system
    3. CPanel system
    4. DColumn cover and spandrel system
  9. 9Which of the following details below does not belong to details marked on the elevation of an outside-glazed glass curtain wall (pressure plate–captured glass) above?Imagen de la pregunta 9
    1. AA
    2. BB
    3. CC
    4. DD
  10. 10As per ASTM specifications, which of the following type of roofing is the most common and specifically used as a flood coat in warmer climates?
    1. AType I
    2. BType II
    3. CType III
    4. DType IV

InformaciĂłn

DescripciĂłn
ARCH PDD Test sobre PDD Quiz VIII, creado por a a el 25/06/2024.
Autor
a a
Idioma
English
Visitas
9
Etiquetas
arepddarch
ValoraciĂłn
AĂşn sin valoraciones
Valora este test
Valora este test

MĂĄs sobre Walls and the Building Envelope

EscrĂ­benos

ÂżSobre quĂŠ es tu mensaje?

ÂżQuĂŠ te parece el nuevo diseĂąo?

ÂżTe gusta?