Flashcards
dt revision y8
Cards in this deck (17)
- 1Why do we make models of products?Because we need to make sure our design works out properly before actually making it using real materials
- 2Types of plasticsthermoplastic- can recycle, reheated, reshaped
Thermoset- can not be recycled, reheated or reshaped
because of the difference of the shape of the plastic - 3Materials used in mobile phone holderPly wood
Acrylic
hot melt adhesive
super glue
epoxy resin
liquid solvent cement
PVA - 4Epoxy resinuse: anything that won't be affected by chemicals
used for adhering objects together
Types: epoxy resin adhesive, epoxy resin coating
Application process: mix 'A' and 'B' together on the object and wait to solidify.
Curing time: 5 min - 5liquid solvent cementuse: plastic, used for adhering objects
Application: apply on the material and it melts the material together and becomes one
curing time: 30 sec - 6PVAuse: wood, for adhering objects together
application: apply PVA on wood and adjust the other piece on top, use clamp
curing time: 24 hrs
types: PVA, wood glue, water resistance glue - 7hot melt adhesiveuse: anything won't be affected by heat, adhering materials
application: heat the glue and apply on material, wait to solidify
curing time: 3min - 8super glueuse: smooth materials, adhering and fixing objects
application: apply on material until solidify, it has a strong bond
curing time: 10-30 sec
type: liquid and Gel - 9process of making phone holder1) design on paper
2) design on 2d design
3) modelling
4) cut in real materials
5) sanding, sticking, staining
design, developing, modeling, modifying, sanding, staining - 10Machine safety rules and health in the workshop1) always wear goggles and apron
2) one person in a box while using machine
3) no messing around in the workshop
4) tie hair
5) be careful of fumes from adhesives - 11CADcomputer aided design
the use of computer software to help the creation of products
types: 3D wireframe
2d system - 12Pros and cons of CADpro: increase productivity
improve quality
improve communication
save time
Con: hard to use if not trained
costs a Lot of money
saftware, hardware & location limited - 13CAMComputer aided manufacturing
using softwares to control machines to help making products
types: numerical control machines
flexible manufacturing system
industrial robots - 14Pros and cons of campro: fast and accurate
saves time, useful when making a lot of products
con: expensive, dangerous, cam depends on cad - 15butt jointsthe technique when 2 pieces are joined by butting them together. weak because depends on glue
- 16finger jointscutting sets of rectangular cuts in 2 pieces of wood and then interlock them and glue them together
- 17what is the design feature of Van Der rohe?eliminating, which means he like to take things of the original design.
E.g. he takes armrest of a couch
Information
- Description
- Form 6 History and Culture Flashcards on dt revision y8, created by Liu Ashley on 26/11/2018.
- Created by
- Liu Ashley
- Views
- 1
- Rating