GoConqr has a new look! Let us know what you think.

Flashcards

Troubleshooting

Hugo Castro Gould Informática y Comunicaciones English 20 cards

Troubleshooting

Cards in this deck (20)

  1. 1Can cause intersymbol interference (ISI), which causes data corruptionMultipath
  2. 2Because of the difference in time between the primary signal and the reflected signals, the receiver can have problems demodulating the RF signal’s informationdelay spread
  3. 3Degradation of performance resulting from overlapping frequency space that occurs due to an improper channel reuse designadjacent
    channel interference
  4. 4the difference in decibels between the received signal and the background noise (noise floor)The signal-to-noise ratio
    (SNR)
  5. 5—Disproportionate transmit power settings between multiple clientsDisproportionate transmit power settings between multiple clients
  6. 6What can be a problem with physical carrier sense?all stations may not be able to hear each
    other
  7. 7As client station radios move away from an access point, they will shift down to lower bandwidth capabilities by using a process known as:Dynamic Rate Switching (DRS)
  8. 8When designing a 2.4 GHz 802.11b/g/n network, is a good practice to:To turn off the two lowest data rates of 1 and 2 Mbps
  9. 9A WLAN network administrator should consider disabling the two lowest rates on a 2.4 GHz access point for three reasons: Sticky client roaming problems
     Medium contention
     Hidden node problem
  10. 10method by which client stations move between RF coverage cells in a seamless manner:Roaming
  11. 11What may happen if all of the APs are on the same channel:unnecessary medium
    contention overhead
    occurs
  12. 12This technology introduced the capability of bonding two 20 MHz channels to create a larger 40 MHz channel effectively doubling the frequency bandwidth802.11n
  13. 13Proper network design now entails providing necessary coverage while trying to limit the number of devices connected to any single access point at the same time. The previous concept refers to:2 main wifi design concepts: capacity vs. coverage
  14. 14What is an advantage of using 5GHz Band steering over 2.4GHz?A proper 5 GHz channel reuse pattern using multiple channels will greatly decrease medium contention overhead caused by co-channel interference
  15. 15—Wifi Load balancingWifi Load balancing
  16. 16Mention some facts that can affect on wifi performance:* Transmission Power Rates
    * Antenna Gain Antennas are passive-gain devices that focus the original signal
    * Antenna Type Antennas have different coverage patterns
    * Wavelength Higher frequency signals have a smaller wavelength property
    and will attenuate faster than a lower-frequency signal with a larger
    wavelength
  17. 17attenuation of the signal as a function of distance and frequencyFree Space Path Loss
  18. 18Physical Environment Walls and other obstacles will attenuate an RF signal because of:absorption and other RF propagation behaviors
  19. 19Mention some other facts that affect performance:*Applications Use (VoiP, video, file transfer...)
    *Number of Clients Remember that the WLAN is a shared medium
  20. 20The following weather conditions must be considered for wireless outdoor deployments:*Lightning Direct and indirect lightning strikes
    * highly directional antennas are susceptible to movement or shifting
    caused by wind

Information

Description
Informática y Comunicaciones Flashcards on Troubleshooting, created by Hugo Castro Gould on 03/08/2022.
Views
1
Rating

Feedback

What is it about?

What do you think of the new look?

How do you like it?