Flashcards
Science Chapter 12 Recap from Provincial Workbook
Cards in this deck (55)
- 1What is the continental drift theory?is a theory put forward by Alfred Wegner in the early 20th century that proposed that continents moved around on Earth's surface and were at one time joined together.
- 2What was one of the things that Wegner suggested?That millions of years ago the continents were joined together as a supercontinent called Pangaea .
- 3Why did wegner suggest the theory of a supercontinent?The shape of the continents on a world map suggest that they might fit together like jigsaw pieces.
- 4What were the three other pieces of evidence that supported Wegener's theory of continental drift?1. Matching geologic features, such as mountain ranges and rocks on different continents
2. Matching fossils, on different continents representing species that could not cross oceans
3. Evidence of different climates in the past, such as coal deposits in Antarctica, which is now too cold to support plant life - 5What is Paleoglaciationis a term describing past periods of extensive glaciations that covered most of the continents
- 6Why was Wegener's theory of continental drift rejected at the time?because it did not explain how entire continents could change location
- 7What are tectonic plates?large, rigid, moveable slabs of rock that slide over a layer of partly molten rock
- 8How can continents move? New scientific equipment evidenceMapping of sea floors: when explorers began to map the ocean floor, they discovered undersea mountain ranges.
Mid- Atlantic Ridge
Ocean rock and sediments: rocks taken from the Mid-Atlantic ridge were younger than other ocean rocks
Paleomagnetism: the direction of earth's magnetic polarity can experience a magnetic reversal - 9What does paleomagnetism reveal?indicates that some rocks formed when Earth's magnetic polarity was normal and some formed when the polarity was reversed.
- 10What is sea floor spreading and who proposed this?Harry Hess proposed that magma rises from below Earth's surface, then cools and hardens when it breaks through the surface at a geologic hot spot or a mid-ocean ridge (aka spreading ridge), forming new sea floor
- 11What's a hot spot?a location of excess radioactivity, causing magma to rise to Earth's surface
- 12What is an example of a hot spot?The Hawaiian Islands formed as a tectonic plate passed over a hot spot and magma rose up from under Earth's surface
- 13What causes sea floor spreading?Convection currents deep under Earth's surface may cause new magma to rise and continuously push old rock aside
- 14What concepts were combined to create a new concept?J Tuzo Wilson combined the concepts of sea floor spreading and paleomagnetism to explain continental drift, the beginning of the plate tectonic theory
- 15What is the plate tectonic theory?States that Earth's surface is broken into large plates that move apart and then rejoin, sliding over the semi-fluid rock below.
- 16How thick is the earth?over 1200 km thick
- 17What are the four layers?Crust: outer solid rock layer
Mantle: thickest layer, mostly solid except for upper mantle being able to floor like "thick toothpaste"
Outer core: liquid iron and nickel
Inner core: mostly iron, tremendous pressure keeps it solid - 18What are the two types of crust?Continental crust: is made from a less dense type of rock called granite
Oceanic crust: made from a dense rock called basalt - 19What do tectonic plates make up, and what do they float on?Makes up lithosphere, floats on asthenosphere
- 20What is the difference between lithosphere and asthenosphere?lithosphere: is the crust and upper portion of the mantle
asthenosphere: molten layer of the upper mantle - 21What is mantle convection?is the thermal energy transfer in the mantle where hot, light magma rises and cold, dense lithosphere plate material sinks
- 22What is a mantle plume?an upwelling of extremely hot rock within the Earth's mantle that forms hot spots
- 23Where can rising magma reach the surface?At spreading ridges (in the oceans)
Or rift valleys ( on land)
- the magma cools when it reaches the surface, solidifies and is pushed aside as new magma pushes from below - 24What is ridge push?the spreading mid-ocean ridge pushes the rest of the tectonic plate it is on away from the ridge
- 25What is subduction?the action of one tectonic plate pushing below another tectonic plate. A more dense oceanic plate subducts under a lighter continental plate.
- 26How is subduction related to slab pull?the dense, subducting material pulls the rest of the attached plate toward the subduction zone and down into the mantle, a process called slab pull
- 27A plate boundary is....a location where two plates meet and move relative to each other
- 28what are the three types of plate boundaries?Divergent and Convergent
Transform - 29Explain divergent plate boundariesare areas where tectonic plates are spreading apart.
- ocean ridges such as the Mid-Atlantic ridge are examples of divergent plate boundaries
-diverging plates at the East African Rift are slowly breaking Africa into pieces - 30Explain convergent plate boundaries-plate boundaries where tectonic plates collide
- a subduction zone is a zone representing a convergent plate boundary, where one tectonic plate subducts beneath and is destroyed by the other overriding tectonic plate
-a trench is a long narrow depression in the ocean floor that marks a convergent plate boundary and is part of a subduction zone - 31What two characteristics are found in subduction zones?Large earthquakes and volcanoes
- 32What are the three types of plate convergence?Oceanic-continental
oceanic-oceanic
continental-continental - 33What is an oceanic-continental plate convergence?The oceanic plate subducts under the continental plate, forming a trench
- cone shaped volcanoes can form from magma seeping into the surface
- mountain ranges like the Coast Mountain range also form from convergence
-earthquakes can occur when slab pull, ridge push and subduction stall - 34Define volcano, volcanic belt?A volcano is an opening in the Earth's surface that, when active, spews out gases, chunks of rock, and melted rock
- a volcanic belt is a long change of volcanoes - 35Explain oceanic-oceanic plate convergence- the cooler, denser plate subducts under the warmer, less dense plate
-convergence may produce a volcanic island arc, which is a long chain of volcanic islands, such as those found in Japan, Indonesia, And Alaska's Aleutian islands - 36Explain continental continetal-since both plats are continental plates, their densities are similar
-as they collide their edges fold and crumple, forming mountain ranges
ex. the Himalayas - 37Explain Transform plate boundariesplate boundaries are areas where tectonic plates slide horizontally past each other
- tranform plate boundaries are usually fond near ocean ridges but may also be found on land, such as the San Andreas Fauly
-since no rocks slide past rock, no mountains or vocanoes form but earthquakes may result - 38What is a fault?a break or fracture in rock layers due to movement on either side
- 39What is a transform fault?a fracture zone between two offset segments of a mid-ocean ridge
- 40What is an earthquake?a shaking of the ground as the result of a sudden release of energy in Earth's crust.
-Earthquakes often form as a result of friction between moving tectonic plates that works against convection currents and results in the build-up of pressure - 41what is the focus of an earthquake?where the pressure is finally released.
- 42What is the epicenter?the point on the surface directly above the focus
- 43Differentiate the three types of earthquakes and their depth of focusShallow- 0-70km
Intermediate- 70-300 km
Deep - Greater than 300 km - 44What are seismic wavesenergy released by an earthquake produces vibrations, these are called seismic waves
- they reveal the source and strength of an earthquake - 45What are the three types of waves?Primary
Secondary
Surface waves - 46Describe the characteristics of P wavesare underground seismic waves that travel at about 6 km/s through the Earth's crust, causing the ground to move in the direction of the wave's motion
- travel through solids, liquid, gas
-fastest and first waves to arrive at an earthquake - 47Describe S wavesare underground seismic waves that travel at about 3.5km/s causing the ground to move perpendicular to the direction of the wave's motion
-travels through solids but not liquids
-slower and are the second waves to arrive at an earthquake - 48describe L wavesare seismic waves that ripple along the Earth's surface like ripples on a pond
- usually cause more structural damage than waves
-slowest and last waves to arrive after an earthquake - 49define seismometer/ seismographare machines that measure and record seismic wave energy
- 50what is a seisograma graph that shows the arrival times and sizes of seismic waves produced by an earthquake, how long it lasted, strength
- 51what causes volcanoes to form?the movement of tectonic plates
- 52what are the three types of volcanoesComposite, Shield, Rift eruptions
- 53Describe composite volcanoesare found along plate boundaries and are made of layers of ash and lava, which is magma on the Earth's surface
-as magma reaches the surface, it cools, hardens and traps gases below
-pressure builds and eventually there is an eruption - 54Shield volcanoes- form over hot spots
-lava flows out from a hot spot and forms a low, wide cone
- hawaiian islands - 55Rift eruptionsoccur along long cracks in the lithosphere, such as along the Mid Atlantic Ridge
-not explosive, they release massive amounts of lava
Information
- Description
- Flashcards on Science Chapter 12 Recap from Provincial Workbook, created by Jaclyn Miller on 20/01/2016.
- Created by
- Jaclyn Miller
- Views
- 9
- Rating