Flashcards
TEM - Carter and Williams

Cards in this deck (35)
- 1Why do we need TEMs? What is the resolving power?TEM was originally developed as visible light microscopes had really bad resolutions.
Resolving Power: The smallest distance between two things we can see. Our eyes have a resolution between 0.1-0.2mm. If two objects where closer together than this - they would appear as the same object. - 2How can we 'see' using electrons?The computer converts the electron intensities into light intensities. This way we get contrast.
- 3Resolution equation

- 4Approximated resolution equationThis means that the resolving power is about half the wavelength of the radiation used.
E.g if green light was used (wavelength is about 550nm, then the resolution would be about 300nm)
- 5De Broglie Equation

- 6What is the difference between: V and eVV = the accelerating voltage of the microscope
eV = the energy of the electrons - 7Why is it hard to build the 'perfect' TEM that approaches the resolution of the wavelength of electrons?until recently we couldn't make very good electron lenses (like looking through the bottom of a coke bottle)
- 8What does HRTEM stand for?High Resolution TEM - we can now look at columns of atoms.
- Acceleration potential is now 1-3MV
- These microscope were useful for introducing controlled amont of radiation damage to samples. This was used to try and simulate nuclear reaction environments. - 9What does IVEM stand for?Intermediate Voltage Electron Microscopes.
- Operating voltage: 200-400KV
- Offer a very high resolution (close to the resolution of EM with a voltage of 1MV)
- Most IVEM are now HRTEM with atomic resolution. - 10What does Cs and Cc stand for?- Cs: spherical aberrations corrected
- Cc: chromatic aberrations corrected - 11What is ionising radiation?Radiation that can remove inner-shell (tightly bound) electrons from the attractive field of the nucleus. This is done by transferring some of the energy of the incoming electrons to the individual atoms in the specimen.
- 12What are the advantages of using ionising radiation?Produces a wide range of secondary signals from the specimen which can be used in analytical electron microscopy (AEM)
e.g. secondary electrons, backscattered electrons (BSE), auger electrons....... - 13What does XEDS & EELS stand for?XEDS = x-ray energy-dispersive spectroscopy
EELS = electron energy loss spectroscopy - 14What is another name for an electron beam?An electron probe
(smallest probe diameter: 0.1nm) - 15What does STEM stand for?Scanning Transmission Electron Microscope
- 16Platforms of STEM1.) AEM - analytical electron microscope
2.) Can be its own microscope (scanning imaging and scanned probe)
3.) DSTEM - dedicated STEM. It can only operate in the scanning mode - 17What are the uses of CsSmaller electron probes can be made with higher currents.
- This improves analytical spatial resolution and sensitivity - 18What is the depth of field?The amount of the object which you are imaging which is in focus. To increase the depth of field, decrease the aperture.
- 19What is optical sectioning?This is where you get slices of the image which are in focus at different depths of field.
- 20What happens to the depth of field as you increase the magnification?The depth of field decreases
- 21How is depth of field useful in SEMIt allows you to see the topography of the sample.
- 22Is depth of field important in TEM?No - this is because the sample is usually all in focus at the same time as it's transparent to electrons.
- 23What are the consequences of using Cs?You can use bigger apertures, whilst keeping the same resolution, but loose the depth of field. The specimen must be super thin so that it will stay in focus in extreme conditions.
- 24What happens to electron waves when they are passed through a crystal?They are diffracted
- 25Why is diffraction useful in TEM?It tells you about the crystal structure and defects. The diffraction patterns can always be related back to the image of the specimen area.
- 26How is a convergent pattern produced?This is when the parallel beam from the TEM is converged to produce a focal probe.
- 27What information can you find from a convergent beam pattern?1.) Complete crystal symmetry analysis
2.) Can determine point groups and space groups - 28Why can't you produce a diffraction pattern from a light microscope?The wavelength of light is too big. Things only diffract is the wavelength is similar to the gaps.
- 29Benefits of Cs in DP? Benefits of Cc in DP?Cs: Produces sharper diffraction patterns
Cc: Diffraction patterns come from smaller regions of the crystal - 30Advantages of TEM1.) Produces atomic level resolution images
2.) Generates a variety of signals, which give you information about the chemistry and crystallography
3.) Always produces images which are in focus - 31Limitations of TEM1.) Not a good sampling tool - can only look at small part of your specimen at any time
2.) Before you use the TEM you must use techniques that have better sampling e.g. light microscope and eyes - 32Interpreting TEM imagesA single TEM image has no depth sensitivity. Therefore you can't tell how deep things appear in the image. There is usually info about the top and bottom surfaces, but not much about the middle. This means that you need field ion microscopy / auger spectroscopy to fully characterise the sample.
- 33How to overcome the lack of depth in TEM images?Take a load of pictures at different 3D tilts - similar to a CAT scan.
This technique is used for porous materials containing catalyst particles. - 34What is the equation for intensity?

- 35When in Cc correction really useful?Cc with energy filtering is really useful for imagining thicker samples in the TEM
Information
- Description
- Notes and equations from the Carter and Williams book on TEM
- Created by
- Vicky Cartwright
- Views
- 31
- Tags
- Rating