Flashcards
L#16: Turning
Cards in this deck (12)
- 1Give a definition for machining. (1)Machining is the general term for manufacturing processes where material is removed from a raw workpiece to achieve the desired geometry (1)
- 2What are the four components of a machining system? (1)1. Workpiece
2. Cutting Tool
3. Machine Tool
4. Production personnel - 3What are the four common examples of machining processes? (4)1. Turning
2. Cutting off
3. Slab milling
4. End milling - 4Describe turning (1)Where the workpiece is rotated and a cutting tool is moved in a controlled motion to remove a layer of material (1)
- 5Describe 'cutting off' (1)Where the workpiece is rotated and a cutting tool is moved radially inwards to separate the two parts of the workpiece (1)
- 6Describe slab milling (1)Where the rotating cutting tool is oriented in parallel to the surface of the part and also moves in parallel to the surface of the part and a layer is removed from the top surface (1)
- 7Describe end milling (1)End milling is where the rotating cutting tool is orientated perpendicular to the part and is moved in parallel to the top surface of the workpiece at a certain depth to produce a cavity (1)
- 8Draw simple diagrams for the four common machining processes (4)See notes (4)
- 9Fully derive the 11 equations relating to the mechanics of metal cutting from first principals.See notes.
- 10Which cutting tool is usually used in turning operations? (1)A single-point cutter (1)
- 11What are the two names for the machine used for turning operations? (1)1. Lathe
2. Turning machine
(1) - 12Draw a diagram to show turning. Draw the table of parameters, definitions, units and formula for turning.See notes
Information
- Description
- Manufacturing Operations and Technology Flashcards on L#16: Turning, created by Block on 30/03/2014.
- Created by
- Block
- Views
- 17
- Tags
- Rating