Flowchart
Resistance, potential dividers, thermistors and transistors

Flowchart content
P6
Resisting - the higher the resistance, the lower the current
-the higher the current the brighter the bulb in a circuit
Factors affecting resistance: the length of the wire
temperature
Sharing
Transistors
Potential Divider Circuits
Potential dividers divide up the voltage within a circuit, so that parts of a circuit only receive the voltage they require. Potential dividers usually consist of two or more resistors arranged in series across a power supply.
The output voltage is a fixed proportion of the supply voltage




Resistors in Parallel
Resistors can be arranged in parallel and this will decrease the total resistance
1/RT = 1/R1 + 1/R2 + 1/R3

R1 = 12 Ω
R2 = 18 Ω
R3 = 6 Ω
1/RT = 1/R1 + 1/R2 + 1/R3
1/RT = 1/12 + 1/18 + 1/6
1/RT = 3/36 + 2/36 + 6/36
1/RT = 11/36
RT = 36 / 11
RT = 3.27 Ω
The total resistance is 3.27 Ω.
LDR & THERMISTOR-
The resistance of a light dependant resistor decreases as the light intensity increases.
NTC thermistors are resistors with a negative temperature coefficient, which means that the resistance decreases with increasing temperature.
PTC thermistors are resistors with a positive temperature coefficient, which means that the resistance increases with increasing temperature.
The behaviour of a thermistor is opposite to that of a resistor
In a transistor a small base current can switch on a larger current through the collector

Making an AND gate
2 transistors can be combined to make an AND gate.
A small input current at A will switch on the upper transistor.
A small input current at B will switch on the lower transistor.
A current at A and at B are needed to switch on the voltage supply


Information
- Description
- GCSE Physics Flowchart on Untitled, created by Oli Sutton on 05/02/2017.
- Created by
- Oli Sutton
- Views
- 3
- Rating