Flashcards
Address Classes and Interface Verification
Cards in this deck (8)
- 1List the commands used to verify the configuration and connection of an interface."show run int (interface)"
"show ip interface brief"
"show ip interface" - 2What does the "clear counters (interface)" command do?Clears all counters on the interface.
- 3What is the command to set duplex on a switch?"duplex (half/full)"
- 4Define the address rand of address class A, as well as the high-order bit.The range is 1-127, the high order bit is 0. Meaning the first bit will be zero.
- 5Define the address rand of address class B, as well as the high-order bit.The range is 128-191, the high order bits are 10. Meaning the first two bits will be 10.
- 6Define the address rand of address class C, as well as the high-order bit.The range is 192-223, the high order bits are 110. Meaning the first three bits will be 110.
- 7Define the address rand of address class D, as well as the high-order bit.The range is 224-239, the high order bits are 1110. Meaning the first four bits will be 1110.
- 8Define the address rand of address class E, as well as the high-order bit.The range is 240-254, the high order bits are 11110. Meaning that the first five bits will be 11110.
Information
- Description
- CCNA CCNA 2020 Flashcards on Address Classes and Interface Verification, created by Aliyah Merritt on 31/05/2020.
- Created by
- Aliyah Merritt
- Views
- 0
- Rating