Notes
solution
Content of the notes (1)
Page 1
Solution From Wikipedia, the free encyclopedia This article is about chemical solutions. For other uses, see Solution (disambiguation). Making a saline water solution by dissolving table salt (NaCl) in water. The salt is the solute and the water the solvent. In chemistry, a solution is a homogeneous mixture composed of only one phase. In such a mixture, a solute is a substance dissolvedin another substance, known as a solvent. The solvent does the dissolving. The solution more or less takes on the characteristics of the solvent including its phase, and the solvent is commonly the major fraction of the mixture. The concentration of a solute in a solution is a measure of how much of that solute is dissolved in the solvent.
Contents [hide]
1 Characteristics
2 Types
2.1 Gas
2.2 Liquid
2.3 Solid
3 Solubility
4 Properties
5 Liquid5.1 Preparation from constituent ingredients
6 See also
7 References
Characteristics[edit]
A solution is a homogeneous mixture
The particles of solute in solution cannot be seen by naked eye.
The solution does not allow beam of light to scatter.
A solution is stable.
The solute from the solution cannot be separated by filtration (or mechanically).
Types[edit] Homogeneous means that the components of the mixture form a single phase. The properties of the mixture (such as concentration, temperature, and density) can be uniformly distributed through the volume but only in absence of diffusion phenomena or after their completion. Usually, the substance present in the greatest amount is considered the solvent. Solvents can be gases, liquids or solids. One or more components present in the solution other than the solvent are called solutes. The solution has the same physical state as the solvent.
Gas[edit] If the solvent is a gas, only gases are dissolved under a given set of conditions. An example of a gaseous solution is air (oxygen and other gases dissolved in nitrogen). Since interactions between molecules play almost no role, dilute gases form rather trivial solutions. In part of the literature, they are not even classified as solutions, but addressed asmixtures.
Liquid[edit] If the solvent is a liquid, then gases, liquids, and solids can be dissolved. Here are some examples:
Gas in liquid:
Oxygen in water
Carbon dioxide in water – a less simple example, because the solution is accompanied by a chemical reaction (formation of ions). Note also that the visible bubbles incarbonated water are not the dissolved gas, but only an effervescence of carbon dioxide that has come out of solution; the dissolved gas itself is not visible since it is dissolved on a molecular level.
Liquid in liquid:
The mixing of two or more substances of the same chemistry but different concentrations to form a constant. (Homogenization of solutions)
Alcoholic beverages are basically solutions of ethanol in water.
Solid in liquid:
Sucrose (table sugar) in water
Sodium chloride (table salt) or any other salt in water, which forms an electrolyte: When dissolving, salt dissociates into ions.
Counterexamples are provided by liquid mixtures that are not homogeneous: colloids, suspensions, emulsions are not considered solutions.
Body fluids are examples for complex liquid solutions, containing many solutes. Many of these are electrolytes, since they contain solute ions, such as potassium. Furthermore, they contain solute molecules like sugar and urea. Oxygen and carbon dioxide are also essential components of blood chemistry, where significant changes in their concentrations may be a sign of severe illness or injury.
Solid[edit] If the solvent is a solid, then gases, liquids and solids can be dissolved.
Gas in solids:
Hydrogen dissolves rather well in metals, especially in palladium; this is studied as a means of hydrogen storage.
Liquid in solid:
Mercury in gold, forming an amalgam
Hexane in paraffin wax
Solid in solid:
Steel, basically a solution of carbon atoms in a crystalline matrix of iron atoms.
Alloys like bronze and many others.
Polymers containing plasticizers.
Solubility[edit] Main article: Solubility Main article: Solvation The ability of one compound to dissolve in another compound is called solubility. When a liquid can completely dissolve in another liquid the two liquids are miscible. Two substances that can never mix to form a solution are called immiscible.
All solutions have a positive entropy of mixing. The interactions between different molecules or ions may be energetically favored or not. If interactions are unfavorable, then the free energy decreases with increasing solute concentration. At some point the energy loss outweighs the entropy gain, and no more solute particles can be dissolved; the solution is said to be saturated. However, the point at which a solution can become saturated can change significantly with different environmental factors, such as temperature, pressure, and contamination. For some solute-solvent combinations a supersaturated solution can be prepared by raising the solubility (for example by increasing the temperature) to dissolve more solute, and then lowering it (for example by cooling).
Usually, the greater the temperature of the solvent, the more of a given solid solute it can dissolve. However, most gases and some compounds exhibit solubilities that decrease with increased temperature. Such behavior is a result of an exothermic enthalpy of solution. Some surfactants exhibit this behaviour. The solubility of liquids in liquids is generally less temperature-sensitive than that of solids or gases.
Properties[edit] The physical properties of compounds such as melting point and boiling point change when other compounds are added. Together they are called colligative properties. There are several ways to quantify the amount of one compound dissolved in the other compounds collectively called concentration. Examples include molarity, volume fraction, and mole fraction.
The properties of ideal solutions can be calculated by the linear combination of the properties of its components. If both solute and solvent exist in equal quantities (such as in a 50% ethanol, 50% water solution), the concepts of "solute" and "solvent" become less relevant, but the substance that is more often used as a solvent is normally designated as the solvent (in this example, water).
Liquid[edit] See also: Solvent#Solvent classifications In principle, all types of liquids can behave as solvents: liquid noble gases, molten metals, molten salts, molten covalent networks, and molecular liquids. In the practice of chemistry and biochemistry, most solvents are molecular liquids. They can be classified into polar and non-polar, according to whether their molecules possess a permanentelectric dipole moment. Another distinction is whether their molecules can form hydrogen bonds (protic and aprotic solvents). Water, the most commonly used solvent, is both polar and sustains hydrogen bonds.
Water is a good solvent because the molecules are polar and capable of forming hydrogen bonds(1). Salts dissolve in polar solvents, forming positive and negative ions that are attracted to the negative and positive ends of the solvent molecule, respectively. If the solvent is water, hydration occurs when the charged solute ions become surrounded by water molecules. A standard example is aqueous saltwater. Such solutions are called electrolytes.
For non-ionic solutes, the general rule is: like dissolves like.
Polar solutes dissolve in polar solvents, forming polar bonds or hydrogen bonds. As an example, all alcoholic beverages are aqueous solutions ofethanol. On the other hand, non-polar solutes dissolve better in non-polar solvents. Examples are hydrocarbons such as oil and grease that easily mix with each other, while being incompatible with water.
An example for the immiscibility of oil and water is a leak of petroleum from a damaged tanker, that does not dissolve in the ocean water but rather floats on the surface.
Preparation from constituent ingredients[edit] It is common practice in laboratories to make a solution directly from its constituent ingredients. There are three cases in practical calculation:
Case 1: amount of solvent volume is given.
Case 2: amount of solute mass is given.
Case 3: amount of final solution volume is given.
In the following equations, A is solvent, B is solute, and C is concentration. Solute volume contribution is considered through ideal solution model.
Case 1: amount (mL) of solvent volume VA is given. Solute mass mB = C VA dA /(100-C/dB)
Case 2: amount of solute mass mB is given. Solvent volume VA = mB (100/C-1/ dB )
Case 3: amount (mL) of final solution volume Vt is given. Solute mass mB = C Vt /100; Solvent volume VA=(100/C-1/ dB) mB
Case 2: solute mass is known, VA = mB 100/C
Case 3: total solution volume is know, same equation as case 1. VA=Vt; mB = C VA /100
Example: Make 2 g/100mL of NaCl solution with 1 L water Water (properties). The density of resulting solution is considered to be equal to that of water, statement holding especially for dilute solutions, so the density information is not required.
mB = C VA =( 2 / 100 ) x 1000 =20 g
See also[edit] Underwater diving portal Look up solution or solute in Wiktionary, the free dictionary.
Solvation
Molar solution
Percentage solution (disambiguation)
Solubility equilibrium
Stock solution
Total dissolved solids is a common term in a range of disciplines, and can have different meanings depending on the analytical method used. In water quality, it refers to the amount of residue remaining after evaporation of water from a sample.
Upper critical solution temperature
Lower critical solution temperature
Coil-globule transition
References[edit]
IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "solution".
[show]
v
t
e
Articles related to solutions [hide]
v
t
e
Routes of administration / Dosage forms Oral Digestive tract(enteral) Solids
Pill
Tablet
Capsule
Time release technology
Osmotic delivery system (OROS)
Liquids
Elixir
Emulsion
Herbal tea
Hydrogel
Molecular encapsulation
Softgel
Solution
Suspension
Syrup
Tincture
Buccal(Sublabial)Sublingual Solids
Orally disintegrating tablet (ODT)
Film
Lollipop
Lozenges
Chewing gum
Liquids
Mouthwash
Toothpaste
Ointment
Oral spray
Respiratory
tract Solids
Smoking device
Dry powder inhaler (DPI)
Liquids
Anaesthetic vaporizer
Vaporizer
Nebulizer
metered-dose inhaler (MDI)
Gas
Oxygen mask
Oxygen concentrator
Anaesthetic machine
Relative analgesia machine
Ophthalmic /
Otologic / Nasal
Nasal spray
Ear drops
Eye drops
Ointment
Hydrogel
Nanosphere suspension
Mucoadhesive microdisc (microsphere tablet)
Urogenital
Ointment
Pessary (vaginal suppository)
Vaginal ring
Vaginal douche
Intrauterine device (IUD)
Extra-amniotic infusion
Intravesical infusion
Rectal (enteral)
Ointment
Suppository
Enema
Solution
Hydrogel
Murphy drip
Nutrient enema
Dermal
Ointment
Liniment
Paste
Film
Hydrogel
Liposomes
Transfersome vesicles
Cream
Lotion
Lip balm
Medicated shampoo
Dermal patch
Transdermal patch
Transdermal spray
Jet injector
Injection / Infusion
(into tissue/blood) Skin
Intradermal
Subcutaneous
Transdermal implant
Organs
Intracavernous
Intravitreal
Intra-articular injection
Transscleral
Central nervous system
Intracerebral
Intrathecal
Epidural
Circulatory /Musculoskeletal
Intravenous
Intracardiac
Intramuscular
Intraosseous
Intraperitoneal
Nanocell injection
[show]
v
t
e
Routes of administration by organ system
Solution
From Wikipedia, the free encyclopedia This article is about chemical solutions. For other uses, see Solution (disambiguation). Making a saline water solution by dissolving table salt (NaCl) in water. The salt is the solute and the water the solvent. In chemistry, a solution is a homogeneous mixture composed of only one phase. In such a mixture, a solute is a substance dissolvedin another substance, known as a solvent. The solvent does the dissolving. The solution more or less takes on the characteristics of the solvent including its phase, and the solvent is commonly the major fraction of the mixture. The concentration of a solute in a solution is a measure of how much of that solute is dissolved in the solvent.
Contents [hide]
1 Characteristics
2 Types
2.1 Gas
2.2 Liquid
2.3 Solid
3 Solubility
4 Properties
5 Liquid5.1 Preparation from constituent ingredients
6 See also
7 References
Characteristics[edit]
A solution is a homogeneous mixture
The particles of solute in solution cannot be seen by naked eye.
The solution does not allow beam of light to scatter.
A solution is stable.
The solute from the solution cannot be separated by filtration (or mechanically).
Types[edit] Homogeneous means that the components of the mixture form a single phase. The properties of the mixture (such as concentration, temperature, and density) can be uniformly distributed through the volume but only in absence of diffusion phenomena or after their completion. Usually, the substance present in the greatest amount is considered the solvent. Solvents can be gases, liquids or solids. One or more components present in the solution other than the solvent are called solutes. The solution has the same physical state as the solvent.
Gas[edit] If the solvent is a gas, only gases are dissolved under a given set of conditions. An example of a gaseous solution is air (oxygen and other gases dissolved in nitrogen). Since interactions between molecules play almost no role, dilute gases form rather trivial solutions. In part of the literature, they are not even classified as solutions, but addressed asmixtures.
Liquid[edit] If the solvent is a liquid, then gases, liquids, and solids can be dissolved. Here are some examples:
Gas in liquid:
Oxygen in water
Carbon dioxide in water – a less simple example, because the solution is accompanied by a chemical reaction (formation of ions). Note also that the visible bubbles incarbonated water are not the dissolved gas, but only an effervescence of carbon dioxide that has come out of solution; the dissolved gas itself is not visible since it is dissolved on a molecular level.
Liquid in liquid:
The mixing of two or more substances of the same chemistry but different concentrations to form a constant. (Homogenization of solutions)
Alcoholic beverages are basically solutions of ethanol in water.
Solid in liquid:
Sucrose (table sugar) in water
Sodium chloride (table salt) or any other salt in water, which forms an electrolyte: When dissolving, salt dissociates into ions.
Counterexamples are provided by liquid mixtures that are not homogeneous: colloids, suspensions, emulsions are not considered solutions.
Body fluids are examples for complex liquid solutions, containing many solutes. Many of these are electrolytes, since they contain solute ions, such as potassium. Furthermore, they contain solute molecules like sugar and urea. Oxygen and carbon dioxide are also essential components of blood chemistry, where significant changes in their concentrations may be a sign of severe illness or injury.
Solid[edit] If the solvent is a solid, then gases, liquids and solids can be dissolved.
Gas in solids:
Hydrogen dissolves rather well in metals, especially in palladium; this is studied as a means of hydrogen storage.
Liquid in solid:
Mercury in gold, forming an amalgam
Hexane in paraffin wax
Solid in solid:
Steel, basically a solution of carbon atoms in a crystalline matrix of iron atoms.
Alloys like bronze and many others.
Polymers containing plasticizers.
Solubility[edit] Main article: Solubility Main article: Solvation The ability of one compound to dissolve in another compound is called solubility. When a liquid can completely dissolve in another liquid the two liquids are miscible. Two substances that can never mix to form a solution are called immiscible.
All solutions have a positive entropy of mixing. The interactions between different molecules or ions may be energetically favored or not. If interactions are unfavorable, then the free energy decreases with increasing solute concentration. At some point the energy loss outweighs the entropy gain, and no more solute particles can be dissolved; the solution is said to be saturated. However, the point at which a solution can become saturated can change significantly with different environmental factors, such as temperature, pressure, and contamination. For some solute-solvent combinations a supersaturated solution can be prepared by raising the solubility (for example by increasing the temperature) to dissolve more solute, and then lowering it (for example by cooling).
Usually, the greater the temperature of the solvent, the more of a given solid solute it can dissolve. However, most gases and some compounds exhibit solubilities that decrease with increased temperature. Such behavior is a result of an exothermic enthalpy of solution. Some surfactants exhibit this behaviour. The solubility of liquids in liquids is generally less temperature-sensitive than that of solids or gases.
Properties[edit] The physical properties of compounds such as melting point and boiling point change when other compounds are added. Together they are called colligative properties. There are several ways to quantify the amount of one compound dissolved in the other compounds collectively called concentration. Examples include molarity, volume fraction, and mole fraction.
The properties of ideal solutions can be calculated by the linear combination of the properties of its components. If both solute and solvent exist in equal quantities (such as in a 50% ethanol, 50% water solution), the concepts of "solute" and "solvent" become less relevant, but the substance that is more often used as a solvent is normally designated as the solvent (in this example, water).
Liquid[edit] See also: Solvent#Solvent classifications In principle, all types of liquids can behave as solvents: liquid noble gases, molten metals, molten salts, molten covalent networks, and molecular liquids. In the practice of chemistry and biochemistry, most solvents are molecular liquids. They can be classified into polar and non-polar, according to whether their molecules possess a permanentelectric dipole moment. Another distinction is whether their molecules can form hydrogen bonds (protic and aprotic solvents). Water, the most commonly used solvent, is both polar and sustains hydrogen bonds.
Water is a good solvent because the molecules are polar and capable of forming hydrogen bonds(1). Salts dissolve in polar solvents, forming positive and negative ions that are attracted to the negative and positive ends of the solvent molecule, respectively. If the solvent is water, hydration occurs when the charged solute ions become surrounded by water molecules. A standard example is aqueous saltwater. Such solutions are called electrolytes.
For non-ionic solutes, the general rule is: like dissolves like.
Polar solutes dissolve in polar solvents, forming polar bonds or hydrogen bonds. As an example, all alcoholic beverages are aqueous solutions ofethanol. On the other hand, non-polar solutes dissolve better in non-polar solvents. Examples are hydrocarbons such as oil and grease that easily mix with each other, while being incompatible with water.
An example for the immiscibility of oil and water is a leak of petroleum from a damaged tanker, that does not dissolve in the ocean water but rather floats on the surface.
Preparation from constituent ingredients[edit] It is common practice in laboratories to make a solution directly from its constituent ingredients. There are three cases in practical calculation:
Case 1: amount of solvent volume is given.
Case 2: amount of solute mass is given.
Case 3: amount of final solution volume is given.
In the following equations, A is solvent, B is solute, and C is concentration. Solute volume contribution is considered through ideal solution model.
Case 1: amount (mL) of solvent volume VA is given. Solute mass mB = C VA dA /(100-C/dB)
Case 2: amount of solute mass mB is given. Solvent volume VA = mB (100/C-1/ dB )
Case 3: amount (mL) of final solution volume Vt is given. Solute mass mB = C Vt /100; Solvent volume VA=(100/C-1/ dB) mB
Case 2: solute mass is known, VA = mB 100/C
Case 3: total solution volume is know, same equation as case 1. VA=Vt; mB = C VA /100
Example: Make 2 g/100mL of NaCl solution with 1 L water Water (properties). The density of resulting solution is considered to be equal to that of water, statement holding especially for dilute solutions, so the density information is not required.
mB = C VA =( 2 / 100 ) x 1000 =20 g
See also[edit] Underwater diving portal Look up solution or solute in Wiktionary, the free dictionary.
Solvation
Molar solution
Percentage solution (disambiguation)
Solubility equilibrium
Stock solution
Total dissolved solids is a common term in a range of disciplines, and can have different meanings depending on the analytical method used. In water quality, it refers to the amount of residue remaining after evaporation of water from a sample.
Upper critical solution temperature
Lower critical solution temperature
Coil-globule transition
References[edit]
IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "solution".
[show]
v
t
e
Articles related to solutions [hide]
v
t
e
Routes of administration / Dosage forms Oral Digestive tract(enteral) Solids
Pill
Tablet
Capsule
Time release technology
Osmotic delivery system (OROS)
Liquids
Elixir
Emulsion
Herbal tea
Hydrogel
Molecular encapsulation
Softgel
Solution
Suspension
Syrup
Tincture
Buccal(Sublabial)Sublingual Solids
Orally disintegrating tablet (ODT)
Film
Lollipop
Lozenges
Chewing gum
Liquids
Mouthwash
Toothpaste
Ointment
Oral spray
Respiratory
tract Solids
Smoking device
Dry powder inhaler (DPI)
Liquids
Anaesthetic vaporizer
Vaporizer
Nebulizer
metered-dose inhaler (MDI)
Gas
Oxygen mask
Oxygen concentrator
Anaesthetic machine
Relative analgesia machine
Ophthalmic /
Otologic / Nasal
Nasal spray
Ear drops
Eye drops
Ointment
Hydrogel
Nanosphere suspension
Mucoadhesive microdisc (microsphere tablet)
Urogenital
Ointment
Pessary (vaginal suppository)
Vaginal ring
Vaginal douche
Intrauterine device (IUD)
Extra-amniotic infusion
Intravesical infusion
Rectal (enteral)
Ointment
Suppository
Enema
Solution
Hydrogel
Murphy drip
Nutrient enema
Dermal
Ointment
Liniment
Paste
Film
Hydrogel
Liposomes
Transfersome vesicles
Cream
Lotion
Lip balm
Medicated shampoo
Dermal patch
Transdermal patch
Transdermal spray
Jet injector
Injection / Infusion
(into tissue/blood) Skin
Intradermal
Subcutaneous
Transdermal implant
Organs
Intracavernous
Intravitreal
Intra-articular injection
Transscleral
Central nervous system
Intracerebral
Intrathecal
Epidural
Circulatory /Musculoskeletal
Intravenous
Intracardiac
Intramuscular
Intraosseous
Intraperitoneal
Nanocell injection
[show]
v
t
e
Routes of administration by organ system
solution