Quiz
CDC 2A652N - Volume 1 - Maintenance & Fundamentals
Questions in this quiz (73)
1Risk management principles should be applied to
- AOnly duty-related activities to enhance the safety and well-being of yourself and others.
- BOn- and off-duty activities to enhance the safety and well-being of yourself and others.
- COnly duty-related activities to protect yourself and other Airmen from imminent harm.
- DOn- and off-duty activities to protect yourself and other Airmen from imminent harm.
2What situation does not warrant prompt reporting to your supervisor?
- AUsing personal protective equipment.
- BUnsafe working conditions.
- CKnown pregnancies.
- DPersonal injury.
3Before removing a component from an air compressor, you must ensure
- AThe air compressor is grounded.
- BThe air strainer is in place.
- CThe battery is disconnected.
- DAll air pressure is drained.
4Why should the frame of an electrical motor be grounded?
- ATo prevent the energized windings from touching the frame.
- BTo prevent current from following the path of least resistance.
- CTo prevent you from receiving an electrical shock if the energized windings touch the frame.
- DTo prevent current from flowing directly to ground if the energized windings touch the frame.
5Which type of hammer should you use to avoid damaging driving materials?
- AClaw
- BSledge
- CSoft face
- DBall-peen
6Which type of screwdriver has blades designed to lessen the possibility of the screwdriver slipping from the screw head?
- ACross-point.
- BFlat-blade.
- CCross-tip.
- DOffset
7Which pliers should be used to hold odd-shaped objects?
- ASnap ring.
- BDiagonal cutting.
- CMultiple slip-joint.
- DCombination slip-joint
8Which pliers have a locking device to hold materials securely?
- ASnap ring.
- BVice grips.
- CWater pump.
- DDiagonal cutters.
9Diagonal cutting pliers are designed to cut
- ABolts
- BRivets
- CHard steel
- DSmall wire
10Before operating the pneumatic impact wrench, you must
- AInspect it
- BLubricate it
- CBlow out the air hose
- DEnsure that its use is necessary
11Replacement hardware decisions on support equipment must be governed by
- ASupervisor's preference
- BServiceablility criteria
- CCosmetic appearance
- DAvailability
12What type of bolt is typically used to connect accessories to an engine?
- AStud
- BFine thread bolt
- CCoarse thread bolt
- DGeneral purpose bolt
13What type of nut should never be used in areas where the temperature exceeds 250 degrees Fahrenheit?
- ANonmetallic self-locking nuts
- BMetallic self-locking nuts
- CCastellated nuts
- DPlain nuts
14What color code is used on pre-insulated terminal lugs for wire sizes 18 through 22?
- ARed
- BBlue
- CGreen
- DYellow
15What are the three different types of terminal lugs?
- ARed, Blue & Yellow
- BStraight, Right Angle & Flat
- CCopper, Aluminum & Plastic
- DPre-insulated, uninsulated & reinsulated
16What does the “-4” identify in fitting part number MS20822-4D?
- AMilitary specification
- BType of fitting
- CAir Force/Navy
- DFitting size
17What type of damage greatly reduces the ability of tubing to withstand internal pressure and vibration?
- AScratches
- BChafing
- CDents
- DNicks
18A flexible hose in a 3,000 psi system must be pressure tested to
- A3,000 psi without bursting
- B9,000 psi without bursting
- C12,000 psi without bursting
- D15,000 psi without bursting
19When installing a flexible hose, you must provide slack or bend in the hose to
- APrevent twisting of the hose
- BCompensate for change in length
- CPlace a mechanical load on the hose
- DProtect it from a hot pipe or manifold
20How can people best prevent FOD?
- ALook for loose objects (stone, paper, or trash), pick them up when discovered, and encourage others to do the same.
- BLearn the basic classes of FOD, recognize its causes, and account for tools and hardware used during maintenance.
- CLook for loose objects discarded on the flight line during maintenance activities.
- DPeriodically participate in “FOD walks” on taxiways and runways.
21 You need to find all of the TOs for a specific weapon system or piece of equipment. What type of index should you use?
- ATO catalog
- BAlphabetical index
- CCross-reference table
- DLOAPs
22You need to find the part number for an item prior to ordering it from supply. You’ve obtained the appropriate IPB manual for the end-item. What section of the IPB should you use to find the major assembly to which the desired item belongs?
- ATable of Contents
- BReference designator index
- CAppropriate figure/illustration
- DNational stock number and reference number index
23Which TCTO is issued to correct unsafe conditions that, if not corrected, could result in serious or fatal injury to personnel?
- ASaftey
- BUrgent Action
- CRoutine Action
- DImmediate Action
24What type of TCTO is often accomplished by contractors, modification centers, or specific Air Force activities higher than organizational\intermediate-level maintenance due to the complexity involved?
- AAbbreviated TCTO.
- BInspection TCTO.
- CRecord TCTO.
- DInterim TCTO.
25The main advantage of using abbreviated TOs is they
- ACover safety in more detail
- BServe as supplemental material
- CParaphrase and eliminate the need for basic TOs
- DOrganize and simplify instructions in a condensed version
26Periodic inspection work cards are divided into three sections that cover the requirements for
- APeriodic inspections, lubrication, and special inspections.
- BPeriodic inspections, special inspections, and safety.
- CPeriodic inspections, lubrication, and safety.
- DSpecial inspections, lubrication, and safety.
27Which abbreviated TO provides guidance for checking the general serviceability of a piece of equipment including applicable safety warnings, cautions, and notes?
- ALubrication charts
- BIllustrated parts breakdown
- CService inspection work cards
- DPeriodic inspection work cards
28An example of a TO deficiency is
- AImproper sequencing of pages
- BInsufficient information
- CTypographical errors
- DMisspelled words
29Which form should you submit to correct a TO deficiency?
- AAFTO Form 1000, Deficiency Report.
- BAFTO Form 601A, Change Recommendation
- CAFTO Form 95, Support Equipment Record
- DAFTO Form 22, Technical Manual ™ Change Recommendation and Reply
30What are the two general classes of Air Force publications?
- APamphlets and manuals
- BDepartmental and field
- CInstructions and manuals
- DSupplements and instructions
31OIs are similar to Air Force instructions, but they apply only to
- AAir Force wings
- BSupport personnel
- CMaintenance personnel
- DPersonnel within the issuing organization
32What type of standard publication is used by lower headquarters to implement, amplify, interpret, or clarify a higher level publication?
- ASupplements
- BVisual aids
- CBulletins
- DManuals
33The first number of a standard Air Force publication number is referred to as the “series” and represents the
- ABroad area covered
- BSpecific area covered
- CSpecific title of the publication
- DSpecific military personnel affected
34Where do you access standard Air Force publications?
- AAir Force e-Publishing website.
- BLOAPs
- CBase-level functional publication library
- DAFI 33–360
35What impact is made on the maintenance organization by ensuring availability of adequate parts, equipment, and training?
- AIncreasing bottlenecks and maximizing repair cycle time
- BIncreasing bottlenecks and minimizing repair cycle time
- CEliminating bottlenecks and minimizing repair cycle time
- DEliminating bottlenecks and maximizing repair cycle time
36Which maintenance levels are considered together as “field maintenance”?
- ACentralized and depot
- BDepot and provisional
- CProvisional and centralized
- DOrganizational and intermediate
37Organizational maintenance consists of
- AOn-equipment tasks normally performed using the resources of an operating command at an operating location.
- BOn-equipment tasks normally performed using the resources of a supporting command or intermediate repair facility.
- COff-equipment tasks normally performed using the resources of an operating command at an operating location or intermediate repair facility.
- DOn- or off-equipment tasks that require highly specialized skills, sophisticated shop equipment, and/or special facilities of a supporting command
38The main purpose of the inspection system is to
- AGet ahead on unscheduled maintenance
- BKeep equipment operating and looking good
- CKeeping the mechanic working on minor problems
- DLocate problems and repair equipment before total failure
39The maintenance symbol the represents the most serious operational condition for equipment is a
- ARex X
- BRed Dash
- CRed Diagonal
- DCircled Red X
40Which symbol indicates an operational check is overdue?
- ARed X
- BRed Dash
- CRed Diagonal
- DCircled Red X
41Which section of the AFTO Form 244 is used to record a forms review?
- APart II, Non-scheduled Inspection
- BPart III, Scheduled Inspection
- CPart IV, Supervisory Review
- DPart V, Maintenance/Delayed Discrepancy
42When closing out an AFTO Form 244, what is entered on the form to close out uncompleted inspections?
- AA red X and your initials in Part IV, Supervisory Review
- BA red X and your initials in Part III, Scheduled Inspections
- CThe letters “CF” (for carried forward) and your initials in Part IV, Supervisory Review
- DThe letters “CF” (for carried forward) and your initials in Part III, Scheduled Inspections
43What is the condition of a component bearing a green equipment condition label?
- AUnserviceable (Condemned)
- BUnserviceable (Repairable)
- CServiceable
- DSuspended
44What color is the equipment condition tag attached to an item being held as an exhibit?
- ABrown
- BGreen
- CWhite
- DYellow
45What maintenance supply form is used to order commonly stocked supplies or turn in excess or unserviceable property?
- AAF Form 2005
- BAFTO Form 350
- CDD Form 1348-6
- DDD Form 1348-1A
46What MDD code identifies the system that was worked on?
- AType maintenance
- BWork unit code
- CCategory of labor
- DUnits
47Distinguish between “excess” and “surplus” as they apply to Air Force supply discipline.
- AExcess and surplus are the same.
- BExcess and surplus are the turn-in of property no longer needed.
- CSurplus is property no longer needed at your base, and excess is property no longer needed by another military service or Federal agency.
- DExcess is property no longer needed at your base, and surplus is property no longer needed by another military service or Federal agency.
48What is a major concept regarding “economic use” of supplies and equipment?
- AUse them only for their intended purposes.
- BAlways order the least expensive item to do the job.
- CProtect items from hazards such as fire or corrosion.
- DOrder only the minimum supplies necessary to do a job.
49Who is responsible for ensuring that property records of supply transactions are kept accurately?
- ACommander
- BSupervisor
- CPerson who signed for an account
- DPerson who has possession of the property
50To be held responsible for property, you must
- APossess it
- BSign for it
- CBe a 5 level
- DBe a supervisor
51What are you required to do with Air Force property you might find and believe it to be lost or misplaced?
- ALeave it where you found it
- BPlace it back into the supply system.
- CTake the item to the organizational commander.
- DTake it to the security forces lost and found section.
52What equipment does not require an AFTO Form 375?
- AItems less than $2,500
- BItems less than $25,000
- CItems more than $2,500
- DItems more than $25,000
53Items that retain their identity throughout the period of their use and may be turned in and reissued for use by others are considered
- ADIFM
- BExcess
- CExpendable
- DNonexpendable
54When the bench stock quantity level falls below 50 % for an item, you should
- APost a due-out list
- BPlace a red tag on the bin
- CNotify supply that stock level is low
- DInitial the initial supply stock listing
55The responsibility of a person to make good any loss, destruction, or damage of government property caused by misuse or neglect is what kind of liability?
- AProperty
- BPersonal
- CPecuniary
- DCommand
56How can a person be relieved from property responsibility other than by pecuniary liability?
- ATurn-in only
- BTransfer only
- CTurn-in or Transfer
- DCash collection voucher or statement of charges
57A statement of charges would be prepared under which of these circumstances?
- AIf a lost item is not expendable
- BIf you make a cash payment for a lost item
- CIf you signed a hand receipt for a lost item
- DIf you want to use payroll deduction to pay the cost of a lost item
58What must be done if SSgt Ortiz refuses to admit pecuniary liability for the loss of a $275 lawn mower for which he has custodial responsibility?
- AA report of survey must be initiated.
- BA statement of charges must be prepared.
- CCharges must be made on a military pay order.
- DThe mower must be replaced by one of equivalent value.
59After a deficiency has been discovered, when must a category II PQDR be submitted to the screening point?
- A24 hours
- B2 calendar days
- C5 calendar days
- D10 calendar days
60Within the deficiency reporting system, who is responsible for the resolution of the deficiency?
- AOriginating point
- BScreening point
- CAction point
- DSupport point
61Within the deficiency reporting system, who assigns a report control number and ensures proper marking and handling of exhibits?
- AOriginating point
- BScreening point
- CAction point
- DSupport point
62Who should AGE maintainers contact for submittal format of agenda items when preparing for the PIWG?
- AMAJCOM AGE functional managers
- BScreening point within the originating activity
- CLead command (AFMC)
- DWR-ALC
63On which type of metal can you leave corrosion as long as the component is operational?
- ASteel
- BCopper
- CAluminum
- DNone, all corrosion must be removed.
64What marking is applied to AGE for night safety?
- AInformational
- BSafety/Danger
- CReflectorization
- DCaution/Warning
65Guidelines for storing AGE are in
- ATO 35-1-3
- BTO 35-1-4
- CTO 35-1-12
- DAFMAN 23-110
66Which of these items must be removed from test equipment before storage?
- AWet and dry cell batteries
- BDry charge batteries
- CBattery compartment
- DBattery holder
67What AGE must have the fuel drained when preparing it for mobility?
- AEquipment with fuel levels that cannot be verified
- BSelf-propelled equipment required for immediate use at deployment sites
- CEquipment that is not self-propelled and is required for immediate use at deployment sites
- DAll AGE must have fuel drained prior to deployment; there are no exceptions
68During a battery condition check, what is an acceptable voltage reading for a 12-volt battery?
- A8–2 volts
- B10–12 volts
- C12.4 volts or lower
- D12.7 volts or higher
69After connecting a voltmeter across the starter terminals and clamping a current probe around the positive battery cable, what must be done prior to cranking the engine when performing a starting system check on AGE?
- AEstimate the temperature of the battery.
- BPrevent the engine from starting.
- CPerform a battery cable test.
- DDisconnect the voltmeter.
70How should you approach a parked aircraft with your vehicle?
- AOnly when a guide is posted.
- BWithin 25 feet of an aircraft with engines running
- CWith the driver’s side of the vehicle toward the aircraft
- DWith the driver’s side of the vehicle away from the aircraft
71What should you do if your vehicle meets a moving aircraft at night?
- ATurn off your headlights and leave your parking lights on.
- BDim your headlights and continue on.
- CStop and change directions.
- DTurn all lights off.
72Why should you apply silicone sealant to the valve stem area of a wheel?
- ATo keep rims from flying apart
- BTo keep water from entering rims
- CAs a treatment for weather cracks
- DAs a treatment for severe corrosion
73What must you do before inflating the inner tube fully on a split rim tire?
- AFully deflate the tire
- BTorque wheel lug bolts
- CCheck tires for foreign objects
- DEnsure rims are completely bolted together and torqued.
Information
- Description
- CDC 2A652N - Volume 1 - Maintenance & Fundamentals
- Author
- nicilynn1981
- Language
- English
- Views
- 66
- Tags
- Rating
- No ratings yet Rate this quiz