Quiz
Producing specialist decorative finishes quiz
Questions in this quiz (20)
1What is the correct abrasive to use when preparing an oil borne ground coating?
- Aa Aluminium oxide.
- Bb Silicon Carbide.
- Cc Sand paper.
- Dd Wire wool.
- Aa Aluminium oxide.
2What is the most suitable acrylic borne coating to use as a ground coat when applying a
water borne system?- Aa Gloss.
- Bb Eggshell.
- Cc Emulsion.
- Dd Undercoat.
- Aa Gloss.
3Which of the following can cause bittiness to decorative work?
.- Aa Uneven colour.
- Bb Uneven application.
- Cc Insufficient material.
- Dd Insufficient preparation
- Aa Uneven colour.
4What is the correct way to lay off a solvent borne eggshell ground coat on a wall?
- Aa Crisscross.
- Bb Vertically.
- Cc Arching.
- Dd Horizontally.
- Aa Crisscross.
5What is the main benefit of using a stipple brush on ground coats?
- Aa It makes the application faster.
- Bb It reduces the drying time.
- Cc It removes brush marks.
- Dd It deepens the colour.
- Aa It makes the application faster.
6What material is mixed with a glaze to produce a scumble?
- Aa Oil.
- Bb Spirit.
- Cc Water.
- Dd Colourant.
- Aa Oil.
7What tool is used to create a soft appearance on a glazed surface?
- Aa Natural sponge.
- Bb Mohair roller.
- Cc Stipple brush.
- Dd Chamois leather.
- Aa Natural sponge.
8Other than boots and overalls, which PPE should be worn when applying broken colour
effect?- Aa Mask.
- Bb Gloves.
- Cc Goggles.
- Dd Ear plugs.
- Aa Mask.
9Which of the following describes a glaze?
- Aa A material used to extend the drying time in paint.
- Bb One of the additives that make up a scumble.
- Cc A material used to make up a stencil.
- Dd An additive that makes up a primer.
- Aa A material used to extend the drying time in paint.
10Which material is used to extend the drying time in oil borne scumble?
- Aa White spirit.
- Bb Linseed oil.
- Cc Colourant.
- Dd Glaze.
- Aa White spirit.
11What will cause yellowing to broken colour after a period of time?
- Aa Lack of light.
- Bb Lack of spirit.
- Cc Lack of scumble.
- Dd Lack of colourant.
- Aa Lack of light.
12Why should more scumble than needed be mixed together for a piece of work?
- Aa To save time.
- Bb To repair damage.
- Cc To allow for spillages.
- Dd To prepare for the next job.
- Aa To save time.
13Adding thinners to the scumble will alter the effect by
- Aa adding shine
- Bb darkening
- Cc yellowing
- Dd lightening
- Aa adding shine
14Which of the following describes a substrate that allows light to pass through but cannot
be seen through?- Aa Translucent.
- Bb Reflective.
- Cc Transparent.
- Dd Opaque.
- Aa Translucent.
15When rag rolling what application fault is caused by not overlapping the pattern?
- Aa Creeping.
- Bb Skidding.
- Cc Bleeding.
- Dd Banding.
- Aa Creeping.
16How can skidding be prevented?
- Aa Keeping a wet edge going.
- Bb Crossing over when ragging.
- Cc Using the correct ground coat.
- Dd Mixing the correct ratio of materials.
- Aa Keeping a wet edge going.
17What would happen if incorrect tape is used when masking?
- Aa Uneven edges.
- Bb Crisp edges.
- Cc Bleeding.
- Dd Creepage
- Aa Uneven edges.
18Damage to surface when removing masking tape is mainly caused by
- Aa incorrect tape choice
- Bb pulling the tape off slowly
- Cc reducing the tackiness of the tape
- Dd pulling the tape towards the surface.
- Aa incorrect tape choice
19What is the correct process when cleaning chamois leathers?
- Aa Wash, fold, store.
- Bb Dry, fold, store.
- Cc Wash, dry, store.
- Dd Hang, dry, store.
- Aa Wash, fold, store.
20How should brushes be stored after cleaning to allow for drying?
- Aa Hung in ventilated area.
- Bb Hung up in a cupboard.
- Cc Laid on a bench.
- Dd Laid in a box.
- Aa Hung in ventilated area.
Information
- Description
- A practice test for unit 120
- Author
- james crowley
- Language
- English
- Views
- 1,144
- Tags
- Rating
- No ratings yet Rate this quiz