Welding and Joining quizzes
26 quizzes by 15 users
This page gathers over 20 community-made Welding and Joining quizzes, covering processes, inspection, residual stress and mechanical testing. University students and professional candidates can practise these topics, while teachers can use the quizzes as ready-made material; a few resources also suit school students. Pick a quiz to get started.
Quizzes
-
36 questionsW.I.T. Chapter 3: welding and cutting processes 1) which of the following is a function of the flux coating of a smaw electrode
-
27 questionsCWB - Module 4 ( Welding Processes an Equipment) Welding is a joining process that by definition requires the application of:
-
26 questionsW.I.T. Chapter 1: welding inspection and certification 1. Why is there an increasing need for welder quality?
-
25 questionsTest 1 The Industrial Revolution, from 1750 to 1850, introduced a method of joining pieces of iron together known ...
-
190 questionsMSSC Final Review - Sequences 1 through 8
-
35 questionsUntitled 1.- Explain how forge Weld
-
44 questionsW.I.T. Chapter 4: weld joint geometry and welding symbols 1. Which of the following is not considered a type of joint
-
40 questionsAPI 510 Module ASME SEC IX - GENERAL The purpose of the WPS and POR is to determine that:
-
32 questionsPower Sources In GTAW welding, a strong +ve voltage is applied to the Tungsten electrode because of its high melting point
-
21 questionsWelding lecture 3: Fill-in-the-blanks
-
22 questionsWelding lecture 2: Fill-in-the-blanks
-
20 questionsWelding lecture 1: fill-in-the-blanks
-
10 questionsResidual Stress and Distortion Which of following statements is correct?
-
10 questionsAPI 510 Module ASME SEC IX - WPS SMAW 18-1 Do the mechanical tests support qualification of this POR?
-
10 questionsAPI 510 Module ASME SEC IX - WPS 1SM Which of the following variables were not properly specified on WPS 1SM?
-
14 questionsResidual Stress & Distortion - True / False Weld metal shrinkage is not proportional to the amount of weld metal
-
94 questionsWelding CDE If the electrode freezes to the work: a. Increase the amperage b. Change the ground terminal. c. Use a chip...
-
40 questionsWelding Test Practice The ability of a metal to permanently deform under load without breaking is known as:
-
9 questionsV102209 CL 8/5 PUTAR PUTAR CHERABDAY 43. When making repairs to a stainless steel cladding, the base metal should be checked for delayed crackin...
-
12 questionsMechanical Testing Stress at which "permanent set"is 1st recorded, when bar is unloaded is known as:
-
7 questionsClass 5 - Chapter 15 - Welding Terms & Inspection With regards to welding, a Procedure Qualification means that a welding procedure
-
5 questionsJoining technology quiz brazing and welding are types of permanent joining method
-
5 questionsUntitled What type of weld is this?
-
3 questionsUntitled What are the types of heat losses occur during welding?
-
1 questions510 EXAMEN A LIBRO CERRADO 1 An SA-516 Grade 65 test speeimen was used on a PQR. The tensile test speeimen is 0.25" x 0.75" and has an u...
-
1 questionsChapter 8: Plasma Arc Cutting A plasma is present in any electrical discharge.
More Welding and Joining resources
About welding and joining quizzes
GoConqr OriginalWelding and Joining quizzes
These quizzes let you practise different parts of the unit through questions. The quiz on welding and cutting processes asks about electrode flux and designations, while the lecture quizzes use fill-in-the-blanks on toughness, power density and joint continuity. Other quizzes cover mechanical testing, inspection and welding procedure specifications.
Choose a starting point
Start with Residual Stress and Distortion if you want to focus on what happens as a weld cools. Its questions include angular distortion. For a different topic, Power Sources asks about polarity in GTAW welding.
After taking a quiz, note the questions you missed and revisit the relevant topic. If you need a visual overview before trying again, switch to a mind map on the unit page; there are maps on residual stress and distortion. Choose a quiz that matches the topic you want to practise.
Frequently asked questions
Which quiz could I start with?
If you want to review distortion, start with Residual Stress and Distortion. It includes questions on angular distortion and what happens as a weld cools. For practice on a different topic, Power Sources asks about polarity in GTAW welding. Both let you focus on a specific area.
Are there quizzes relevant to API 510 or AWS CWI?
Yes. The page includes API 510 quizzes on ASME Section IX and welding procedure specifications. An inspection and certification quiz also asks about AWS CWI certification rules. These give professional candidates specific topics to practise, while university students and teachers may find them useful for reviewing inspection and procedures.
Are the quizzes free to use?
Yes. Every quiz listed here is free to open, study and take without an account. A free account can save your quiz scores and lets you make your own quizzes, mind maps, flashcards and notes. The resources were made by GoConqr users, rather than GoConqr.