Flashcards
Cables and Connectors NET+ M1
Cards in this deck (30)
- 1Cat5Fast Ethernet
100 Mbps
100 meters (328ft) - 2Cat5eGigabit Ethernet
modern networking requires at least cat5e
found in stores
1 Gbps
100 meters (328ft) - 3Cat 61 GbE/10 GbE
new building installations
more than double the performance of cat5e
1 Gbps/10 Gbps
100 meters (328ft)/55 meters - 4Cat6a10 Gb Ethernet
used in data centers
40-50% thicker and heavier than cat6
10 Gbps
100 meters (328ft) - 5Cat710 Gb Ethernet
10Gbps communication speeds
600 MHz
range of 100 meters (328ft)
screen shielded (foiled) twisted pair - 6Cat840 Gb Ethernet
used in data centers
40 Gbps
2000 MHz
range of 30 meters (98ft)
screen shielded (foiled) twisted pair - 7TIA 568AGS, G, OS, Bl, BlS, O, BrS, Br
data is sent (tx) on Pins 1 & 2
data is received (rx) on Pins 3 & 6
mandated in all US federal government buildings - 8TIA 568BOS, O, GS, Bl, BlS, G, BrS, Br
data is sent (tx) on Pins 1 & 2
data is received (rx) on Pins 3 & 6
how most commercial buildings are wired - 9RJ11most common connector for telephone wall jacks
6P/2C jack
connection for analog signal for DSL - 10RJ45most common twisted-pair connector
for connections within an Ethernet network - 11RG-59legacy internet and legacy cable TV
- 12RG-6CATV, satellite, cable TV, broadband, internet
residential and commercial - 13Coaxial10BASE2 standard
most often used
single central line to transmit data
insulating layer to avoid interference
braided copper shield to act as EMI shield - 14Twinaxialsimilar to coaxial
2 inner conductors
developed by IBM
SFP+ Direct-Attach Copper becoming more commonly used - 15BNCBayonet Neill-Concelman Connector
commonly used in outdoor operations equipment
push and twist to lock in place - 16F-Typeused with coaxial
commonly used in cable TV installations
uses ridges to hold it in place rather than threading - 17SMFsingle-mode fiber
long distance runs
used to interconnect buildings
core is made of glass and is 8-10 microns
jacket is typically yellow - 18MMFmulti-mode fiber
mainly used within a single building
short range communication
comes in a plastic version
core diameter 50 or 62.5 microns
typically jacket is orange, can be aqua - 19LClucent connectors
small-form fiber connector
standard for fast SANs and GB Ethernet adapters
used for fiber - 20STstraight tip
most common for LANs
used for fiber - 21SCsubscriber connector
larger than LC
not as popular as ST for LANs
used for fiber - 22MT-RJmechanical transfer registered jack
popular small-form factor
allow more terminations in the same amount of space as SC
used for fiber - 23APCangled physical contact
less dB loss than UPC
typically for RF video signal transport
optimal performance
8 degree angle allows light to reflect into cladding
used for fiber - 24UPCultra physical contact
straight cut tip
causes more return loss than APC
0 degree angle allows light to reflect to core
used in fiber - 25SFPsmall form-factor pluggable
transmitter and receiver
1 Gbps transfer rate
plugged into GB network switch
connection through a special port - 26SFP+enhanced small form-factor pluggable
transmitter and receiver
10 Gbps transfer rate
transceiver used to connect other devices to a LAN - 27QSFPquad small form-factor pluggable
transmitter and receiver
can carry 4 channels
1 Gbps each channel
plugs into special interface to allow high speed fiber or copper connections - 28QSFP+same as QSFP but with 10 Gbps each channel
- 29CWDMcoarse wavelength multiplexing
supports up to 18 wavelengths per fiber
shorter distances. cheaper
wavelengths are 20nm apart - 30DWDMdense wavelength division multiplexing
supports up to 96 wavelengths per fiber
wavelengths are 0.8nm apart
Information
- Description
- CompTIA Information Technology (Network +) Flashcards on Cables and Connectors NET+ M1, created by Lyndsay Badding on 28/01/2024.
- Created by
- Lyndsay Badding
- Views
- 3
- Tags
- Rating
More on Cable Connectors and Termination