Quiz
ECOR 1010
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (120)
1Which of the following is not included in the "Results and Discussion" part of the engineering report?
- AGraphs
- BResults relating to an objective
- CSignificance of results
- DDifficulties encountered
- EAll of the above are included in “Results and Discussion “part.
2Which of the following are not forms of technical writing?
- ACourtesy.
- Bb) Accuracy.
- Cc) Neatness.
- Dd) Clarity.
- Ee) All of the above are forms of technical writing.
33. A change in unit results in a change in:
- Aa) Magnitude of a measurement.
- Bb) Magnitude of a measurement and physical dimension.
- Cc) Magnitude of physical dimension
- Dd) Magnitude of physical dimensions, measurement and other units.
- Ee) Nothing changes.
44. Which of the following names do not match it’s corresponding letter?
- Aa) K, Kelvin
- Bb) Pa, Pascal
- Cc) F, Farad
- Dd) V, Volt
- Ee) S, Second
55. What is 12.398 + 1.62 + 30 + 2 + 1.99 ?
- Aa) 48.008
- Bb) 48.01
- Cc) 47.99
- Dd) 0.5 x 102
- Ee) None of the above.
66. Identify the incorrect statement:
- Aa) A set of precise measurements may contain significant error.
- Bb) Left hand zeros are significant in fixed notation.
- Cc) The significant digits of a number give a measure of the precision of the number.
- Dd) Systematic and random errors can simultaneously affect a measurement.
- Ee) All digits to the right of a decimal point are significant in scientific notation.
77. Several numbers have been rounded. The incorrectly computated operation to two significant figures is:
- Aa) 1.7862 1.8
- Bb) 36.989 37
- Cc) 2.850 2.8
- Dd) 3.550 3.6
- Ee) 19.825 20
88. How is 25.8 m/s ± 0.8 m/s written in relative form?
- Aa) 25.8 m/s ± 0.8 m/s.
- Bb) 25.8 (1 ± 3.10 %) m/s.
- Cc) (25.8 ± 0.8) m/s.
- Dd) (25.8 ± 125 %) m/s.
- Ee) None of the above.
99. What is measurement error?
- Aa) True value – Measured value.
- Bb) Measured value – True value.
- Cc) Measured value * True value
- Dd) True Vale + Measured value
- Ee) None of the above.
1010. Which of the following is a derived unit?
- Aa) A, Ampere
- Bb) m, metre
- Cc) kg, Kilogram
- Dd) cd, Candela
- Ee) C, Coulomb
11Which of the following is not an advantage of graphical communication?
- Aa) Concise
- Bb) Clear
- Cc) Increase of ambiguity
- Dd) Efficient
- Ee) All of the following are advantages of graphical communication.
1212. Which of the following is not a type of a pictorial drawing?
- Aa) Diagonal
- Bb) Perspective
- Cc) Axonometric
- Dd) Oblique
- Ee) All of the above are types of pictorial drawings.
1313. Identify the incorrect statement:
- Aa) One point perspective: The projection plane is parallel to two principal axis.
- Bb) Two point perspective: Visual rays converge at two vanishing points.
- Cc) Three point perspective: No projection plane is parallel to any principal axis.
- Dd) Axonometric projection: Viewed so as to reveal one side.
- Ee) Orthographic projection: 2D representation of a 3D object.
1414. Which of the following is true about the different types of views and projections:
- Aa) The view that contains the least hidden lines is chosen as the front view.
- Bb) First angle projection is where the top view is drawn below the front view.
- Cc) Third angle projection is where the top view is drawn below the front view.
- Dd) Three principal views can be drawn in an orthographic projection.
- Ee) All of the above are not true.
1515. All of the following are types of views drawn in an orthographic drawing except:
- Aa) Front
- Bb) Side
- Cc) Top
- Dd) Corner
- Ee) All of the above are type of views drawn in an orthographic drawing.
16Identify the incorrect precedence of lines:
- Aa) Visible lines take precedence over centre lines.
- Bb) Cutting plane lines take precedence over centre lines.
- Cc) Center lines takes precedence over hidden lines.
- Dd) Hidden lines take precedence over phantom lines.
- Ee) None of the above is true.
1717. Pick the incorrect statement:
- Aa) Two-view exists in orthographic drawings.
- Bb) Precedence is when two lines coincide.
- Cc) Always dimension from hidden lines and never visible lines.
- Dd) Always leave a gap between the extension line and the object to which it refers.
- Ee) All of the above are incorrect statements.
1819. One of the following is not a type of a line in orthographic drawings:
- Aa) Phantom lines.
- Bb) Hidden lines.
- Cc) Center lines.
- Dd) Witness lines.
- Ee) All of the above are types of lines in orthographic drawings.
1919. One of the following is not a type of a line in orthographic drawings:
- Aa) Phantom lines.
- Bb) Hidden lines.
- Cc) Center lines.
- Dd) Witness lines.
- Ee) All of the above are types of lines in orthographic drawings.
2020. Which of the following does not define a nomography?
- Aa) A graphical computer consisting of arrangements of calibrated scales and lines.
- Bb) A graph that contains bars representing each parameter.
- Cc) Used where tight numerical tolerances are not required.
- Dd) It is read by aligning different scales.
- Ee) A two-dimensional diagram designed to allow the approximate graphical computation of a function.
21Which of the following is not part of an engineering graphic?
- Aa) Nomography
- Bb) Empirical equations
- Cc) CAD
- Dd) Descriptive geometry
- Ee) All of the above are parts of engineering graphics.
2222. Which of the following not an advantage of CAD ( Computer Aided Drafting):
- Aa) Increase accuracy.
- Bb) Difficult revision.
- Cc) Better presentation.
- Dd) Improved filing
- Ee) All of the above are advantages of CAD.
2323. What is CADD (Computer- Aided Design Drafting)?
- Aa) Used to solve design problems, analyze design data, store and disseminate design information.
- Bb) A computer based system used to design a product, devise the production steps, and electronically transfer the data to control the manufacturing equipment.
- Cc) Using computers to generate engineering drawings and technical documents.
- Dd) A computer based system that coordinates and operates all stages of manufacturing from design to finished product.
- Ee) None of the above.
2424. All of the following define Solid Modeling except:
- Aa) Creates 3D virtual objects.
- Bb) Examples include Pro/ENGINEER
- Cc) Models can be virtually manipulated.
- Dd) The virtual objects appear as oblique projections.
- Ee) Represents an existing physical object.
2525. Which of the following best defines the difference between drawing and sketching?
- Aa) Drawing is when you draw subjects in detail while sketching is a rough outline of a drawing.
- Bb) Drawing is rough and not precise whereas sketching is precise.
- Cc) Drawing is detailed while sketching is quick outlined.
- Dd) Sketching is about capturing the essence while drawing is time consuming.
- Ee) None of the above defines the difference correctly.
26A final report is formatted in a clear way. Which of the following is not part of a final report?
- Aa) Bibliography.
- Bb) Appendix.
- Cc) Recommendations.
- Dd) Method
- Ee) All of the above are parts of a final report.
2727. What is the difference between a code and a standard?
- Aa) A code is a set of specifications for the analysis of things, while a standard is a set of specifications for parts.
- Bb) A code places limits to provide an inventory of tooling, while a standard is to achieve a degree of safety.
- Cc) A code is simple, while a standard is complex.
- Dd) A code provides a basis for accreditation, while a standard is an organised system of signs.
- Ee) None of the above define the difference correctly.
2828. Arrange the following method of design in the correct order:
1. Recognition of need.
2. The design loop.
3. Optimization.
4. Definition of the design problem.
5. Definition of the design criteria.- Aa) 2,3,4,5,1
- Bb) 1,2,3,4,5
- Cc) 5,3,4,1,2
- Dd) 1,4,5,2,3
- Ee) 1,5,4,2,3
2929. All of the following define the term Design except:
- Aa) An iterative process.
- Bb) Creative process.
- Cc) Closed-ended problems.
- Dd) Always involves a team effort.
- Ee) All of the following define the term Design correctly.
3030. Which of the following is not a profession needed in System Design?
- Aa) Historians.
- Bb) Psychologists.
- Cc) Lawyers.
- Dd) Social Scientists.
- Ee) All of the above are professions needed in System Design.
31When did Pro/ENGINEER remodel the CAD world?
- Aa) Late 1980s.
- Bb) Early 1980s.
- Cc) Late 1820s
- Dd) Late 1950s
- Ee) Early 1840s
3232. Which of the following is not made using the software Pro/E?
- Aa) Piping layout.
- Bb) Mold design.
- Cc) Numerical control machining.
- Dd) Wiring harness design.
- Ee) All of the above are made using the software.
3333. Choose the best answer:
- Aa) Pro/E enables the user to create fully detailed standard engineering working drawings almost automatically after model generation.
- Bb) Pro/E enables the user to create least detailed standard engineering working graphs almost automatically before model generation.
- Cc) Pro/E enables the user to create fully brief standard engineering working drawings almost after model generation.
- Dd) Pro/E enables the user to create fully detailed standard engineering working maps almost automatically after model generation.
- Ee) Part (a) and Part (d) are true.
3434. Which of the following definitions is not true:
- Aa) Protrusion: Used to add material.
- Bb) Fillets: Used in making holes.
- Cc) Cut: Used to remove material.
- Dd) Mirror: Used to duplicate existing models.
- Ee) All of the above is true.
351. Which of the following tabs do not exist in Pro/E:
- Aa) Coord Sys.
- Bb) Repaint.
- Cc) Refit.
- Dd) Datum Coord.
- Ee) Layers.
36Which of the following is a benefit of RP (Rapid Prototyping)?
- Aa) Can examine more concepts, check design changes.
- Bb) Allows designers to go from exact part to flat screen.
- Cc) Costs increase.
- Dd) Sometimes allows design participants to view design iterations.
- Ee) None of the above is a benefit of RP.
3737. What does SRP stand for?
- Aa) Standard Rapid Prototyping.
- Bb) Subtractive Rapid Prototyping.
- Cc) Safe Rapid Prototyping.
- Dd) Secure Rapid Prototyping.
- Ee) None of the above denotes that.
3838. Arrange the following in correct order:
1. Create a CAD model of the design
2. Convert the CAD model to STL format
3. Construct the model one layer atop another
4. Slice the STL file into thin cross-sectional layers
5. Clean and finish the model.- Aa) 1,2,3,4,5.
- Bb) 5,4,3,2,1.
- Cc) 1,4,5,3,2.
- Dd) 1,2,4,3,5.
- Ee) 1,2,3,5,4.
3939. All of the following is a prototyping machine except:
- Aa) Fused Deposition Modeling.
- Bb) Laminated object manufacturing.
- Cc) Selective laser sintering.
- Dd) 3-D ink jet printer.
- Ee) All of the above.
4040. All of the following define the following prototyping machines correctly except:
- Aa) Stereolithography: Uses a light sensitive liquid polymer.
- Bb) Selective laser sintering: Uses a laser beam to fuse powder.
- Cc) Fused Deposition Modeling: Uses ultraviolet light to harden photosensitive polymers.
- Dd) 3-D ink jet printer: Parts are built upon a platform in a bin of powder.
- Ee) All of the above are correct.
41Which of the following defines the different types of histograms incorrectly?
- Aa) Left skewed: Slopes upwards starting from the right.
- Bb) Right skewed: Slopes upwards starting from the right.
- Cc) Bimodal : Contains two peaks.
- Dd) Truncated: Slopes upwards uniformly.
- Ee) Part (a) & (d) are incorrect.
4242. A sample consists of five observations: {1,2,3,4,5}. What is the standard deviation?
- Aa)√2
- Bb) 4
- Cc) √2.5
- Dd)√3.5
- Ee) 3.24
4343. There are 8 numbers in a set 9.4, 9.9, 9.9, 9.9, 10.0, 10.2, 10.2, 10.5. The mean and standard deviation of the 8 numbers are 10.0 and 0.3 respectively, what percent of the 8 numbers are within 1 standard deviation from the mean?
- Aa) 75 %
- Bb) 60 %
- Cc) 55 %
- Dd) 90 %
- Ee) 85 %
4444. The standard deviation is:
- Aa) The square root of the variance.
- Bb) A measure of variability.
- Cc) An approximate indicator of how numbers vary away from the mean.
- Dd) Shows how tightly data are around the mean.
- Ee) All of the above.
4545. If a sample of 50 batteries is examined, how many standard deviations of the population mean expect to be 98.08 % of the data?
- Aa) 1.98
- Bb) 2.34
- Cc) 2.68
- Dd) 1.24
- Ee) None of the above.
4646. Given 20 resistors. Find the population mean of 18/20 resistors if the mean is 2.5 ohms and the standard deviation is 0.95 ohms:
- Aa) 2.5 ± t20,90* 0.95
- Bb) 2.5 ± z90* 0.95
- Cc) 2.5 ± t19,90* 0.95
- Dd) 2.5 ± 1.96 * 0.95
- Ee) None of the above.
4747. For a sample of size 20 taken from a normally distributed population with standard deviation equal to 5, a 90% confidence interval for the population mean would require the use of:
- Aa) t=1.645
- Bb) t= 1.729
- Cc) t=1.328
- Dd) t=2.12
- Ee) 1.746
4848. Under which of the following circumstances is it impossible to construct a confidence interval for the population mean?
- Aa) A non-normal population with a large sample and an unknown population variance.
- Bb) A non-normal population with a large sample and a known population variance.
- Cc) A normal population with a small sample and an unknown population variance.
- Dd) A non-normal population with a small sample and an unknown population variance.
- Ee) All of the above are possible.
4949. A survey of 100 retailers revealed that the mean after-tax profit was $80,000. If we assume that the population standard deviation is $15,000, determine the 95% confidence interval estimate of the mean after-tax profit for all retailers:
- Aa) $77,060 to $89,240.
- Bb) $75,080 to $86,250.
- Cc) $78,120 to $88,180.
- Dd) $76,390 to $86,450.
- Ee) $72,220 to $84,630
5050. Which of the following is false?
- Aa) The t distribution is symmetric about zero.
- Bb) The t distribution is more spread out than the standard normal distribution.
- Cc) As the degrees of freedom get smaller, the t-distribution’s dispersion gets smaller.
- Dd) The t distribution is mound- shaped.
- Ee) None of the above.
5151. For s symmetric distribution, the mean and median are:
- Aa) The same.
- Bb) Always different.
- Cc) Possibly the same, possible different.
- Dd) Insufficient information.
- Ee) None of the above is true.
5252. If the mean, median and mode of a distribution are 5,6,7 respectively, then the distribution is:
- Aa) Skewed positively.
- Bb) Skewed negatively.
- Cc) Bimodal.
- Dd) Symmetrical.
- Ee) None of the above.
5353. If a sample n= 16, mean is 10.3, standard deviation is 2.6. Calculate a 95 % confidence interval:
- Aa) (9.0, 11.6)
- Bb) (9.6, 11.8)
- Cc) (9.4, 11.2)
- Dd) (9.3, 11.2)
- Ee) (9.5,11.7)
5454. What sample n would give a standard deviation of 14 and a standard error of 2:
- Aa) n= 50
- Bb) n= 28
- Cc) n= 49
- Dd) n= 7
- Ee) n= 56
5555. How many standard deviations of the population mean is 97.56 % of the data if n>40:
- Aa) 2.15
- Bb) 2.25
- Cc) 2.64
- Dd) 2.24
- Ee) None of the above.
56Which of the following is correct?
- Aa) TSS = SSR + SSE
- Bb) SSR = TSS + SSE
- Cc) SSE = TSS + SSR
- Dd) SSE = TSS * SSR
- Ee) SSR = TSS / SSE
5757. A non- linear graph is obtained. Find the coefficient of determination if the correlation coefficient = 0.64
- Aa) 0.8
- Bb) -0.8
- Cc) 0.41
- Dd) -0.41
- Ee) None of the above is true.
5858. Least Square Regression minimizes which of the following?
- Aa) COD (Coefficient of determination).
- Bb) LCC (Linear Correlation Coefficient).
- Cc) SSE (Sum of Squared Error).
- Dd) TSS (Total Sum of Squares).
- Ee) SSR (Sum of Squares for Regression).
5959. What do residuals represent?
- Aa) The difference between the actual Y values and the mean of Y.
- Bb) The difference between the actual Y values and the predicted Y values.
- Cc) The predicted value of Y for the average X value.
- Dd) The square root of the slope.
- Ee) None of the above is true.
6060. Assuming a linear relationship between X & Y, which of the following is true if the correlation of coefficient equals -0.30?
- Aa) There is no correlation.
- Bb) Variable Y is larger than variable X.
- Cc) The variance of X is negative.
- Dd) The slope is negative.
- Ee) None of the above is true.
6161. For any regression calculation:
- Aa) There are several confidence intervals.
- Bb) There is only one confidence interval.
- Cc) There is no confidence interval.
- Dd) Depends on the circumstances.
- Ee) None of the above is true.
6262. The fraction of the variation in the values of y that is explained by the least squares regression of y on x is:
- Aa) The slope of the least square regression line.
- Bb) The square of the correlation coefficient.
- Cc) The intercept of the least square regression line.
- Dd) The correlation coefficient.
- Ee) None of the above is true.
6363. Which of the following is incorrect:
- Aa) In linear regression the line of best fit maximises the distance between the scores and the regression line.
- Bb) In linear regression the line fits the data in the best place possible.
- Cc) In linear regression a real line is drawn through the data points where total error is minimized.
- Dd) In linear regression the line tells us exactly how much y will change as a result of a change in x.
- Ee) All of the above is true.
6464. If a graph is plotted, what is the slope if given that when x= 66, y= 200 and the intercept of the graph is 167?
- Aa) 0.50
- Bb) 0.5
- Cc) 0.45
- Dd) 0.11
- Ee) -0.11
6565. Find the coefficient of determination if the total variation is 120, and the unexplained variation is 40:
- Aa) 0.5
- Bb) 0.67
- Cc) 0.75
- Dd) 0.3
- Ee) 0.17
66If A=[2,4,6;1,3,5;8,9,0]
What is A(2:3,2:3)- Aa) 3 5
9 0 - Bb) 2 4
1 3 - Cc) 1 3
5 8 - Dd) 0 9
8 5 - Ee) Error.
- Aa) 3 5
6767. Which of the following is an incorrect logical operator:
- Aa) <= ( Less then or equal)
- Bb) == ( Equal to)
- Cc) =~ ( Not equal to)
- Dd) | ( Or)
- Ee) All of the above are correct logical operators.
6868. What is the purpose of the semicolon in syntaxes?
- Aa) Does not echo what you write.
- Bb) Echoes what you write.
- Cc) Sets a condition.
- Dd) Used in strings of text.
- Ee) Has no function.
6969. If A=[8,10,12] what is norm(A):
- Aa) 2√77
- Bb) √77
- Cc) 20
- Dd) 12√77
- Ee) None of the above.
7070. a = 2;b = a^2;
while b< 2000
a = a + 2;
b = a^2;
end
a = a - 2;
disp(a)
What is the output?- Aa) 40
- Bb) 38
- Cc) 44
- Dd) 41
- Ee) 36
7171. A=[2;4;6;8]
X=A’/4
What is the ouput?- Aa) 0.5000 1.0000 1.5000 2.0000
- Bb) 1.0000 0.5000 1.5000 2.0000
- Cc) 5.0000 1.0000 1.5000 2.0000
- Dd) 0.5000 0.50000 1.5000 3.0000
- ENone of the above.
7272. Which of the following are not types of variables used in MATLAB?
- Aa) Boolean.
- Bb) Doubles.
- Cc) Integers.
- Dd) Strings.
- Ee) All of the above are variables used in MATLAB.
7373. counter = 5;
factorial = 1;
while (counter > 0)
factorial = factorial * counter;
counter = counter - 1;
end
factorial
What is the output?- Aa) 20
- Bb) 20
- Cc) 25
- Dd) 120
- Ee) 90
74A = [6 3 9];
n = 3;
if n ~= 0
A = A/n;
end
A
What is the ouput?- Aa) 2 1 3
- Bb) 3 1 2
- Cc) 2 1 4
- Dd) 4 1 6
- Ee) 6 3 9
7575. What is mod( -4, 2)
- Aa) 3
- Bb) 2
- Cc) 6
- Dd) 4
- Ee) 0
7676. a=[1,2:3,4;7,9];
b=[4,5;6,7];
c=(a-b)';
d=c^2
What is the ouput?- Aa) 4 5
6 7 - Bb) 1 2
4 3 - Cc) 8 4
6 2 - Dd) 4 1
2 3 - Ee) Error.
- Aa) 4 5
7777. Which of the following are not functions in MATLAB:
- Aa) Else.
- Bb) While loop.
- Cc) elseif.
- Dd) If statement.
- Ee) All of the above are functions.
7878. A=[2,4,6,9;1,0,7,8] B=[1,2;5,4;1,0;3,2] G=(A*B)
What is G(2,2)- Aa) 18
- Bb) 20
- Cc) 14
- Dd) 16
- Ee) 12
7979. a=2;
count=2;
while a<10
if rem(a,2) ==0
count=count+2
end
a=a+1
end
disp(count)
What is the output?- Aa) 15
- Bb) 8
- Cc) 10
- Dd) 12
- Ee) 4
8080. b=1
count=0
while b<10
if rem(b,2) ~=0 & mod(b,3) ~=0
count=count+1
else
count=count-1
end
b=b+1
end
disp(count)
What is the output?- Aa) 0
- Bb) -1
- Cc) -3
- Dd) -4
- Ee) 1
81Which of the following definitions of the operators in Maple is incorrect?
- Aa) Everything following the sign (#) will be interpreted.
- Bb) <F5> switches between text and math mode.
- Cc) Enter executes the input given.
- Dd) <CNTR>+< = > executes an inline expression and displays the result inline.
- Ee) Evalf evaluates the expression assigned.
8282. All of the following your Maple file can be outputted to except:
- Aa) Adobe pdf.
- Bb) .zip
- Cc) Htm
- Dd) LaTex
- Ee) All of the above is correct.
8383. What can maple not do?
- Aa) Algebraic Geometry.
- Bb) Matrix manipulations.
- Cc) 2D plotting.
- Dd) Differential calculus.
- Ee) All of the above maple can do.
8484. What does the operator (:=) do?
- Aa) Evaluate an expression at a point.
- Bb) Assign equations and values to a variable.
- Cc) Equating two equations.
- Dd) Perform recursive assignments.
- Ee) Has no function.
8585. Given equation1, equation2, equation3 containing the variables x,y,z. Which of the following notations solves the 3 equations simultaneously for x,y and z?
- Aa) Solve{(equation1, equation2, equation3),(x,y,z)}
- Bb) Solve({equation1, equation2, equation3),(x,y,z)}
- Cc) Solve[(equation1, equation2, equation3),(x,y,z)]
- Dd) Solve({equation1, equation2, equation3},[x,y,z])
- Ee) None of the above.
86What is LCA (Life Cycle Analysis)?
- Aa) Compiling an inventory of relevant energy and material inputs and environmental releases.
- Bb) Evaluate potential impacts associated with identified inputs and releases.
- Cc) Used to improve processes.
- Dd) Assess the environmental impact of products.
- Ee) All of the above is true.
8787. At what year was Canada’s GDP, Energy consumption and CO2 emissions approximately the same?
- Aa) 1870
- Bb) 1973
- Cc) 1950
- Dd) 1966
- Ee) 1990
8888. Arrange the following from the largest to the least consumption of energy: Gas, oil, Nuclear, coal.
- Aa) Nuclear, gas, oil, coal.
- Bb) Gas, coal, nuclear, oil.
- Cc) Gas, nuclear, oil, coal.
- Dd) Nuclear, coal, oil, gas.
- Ee) Nuclear, coal, gas, oil.
8989. What is expected to happen to oil and gas consumption in the next 50 years?
- Aa) Decrease then increase.
- Bb) Increase.
- Cc) Decrease.
- Dd) Increase then decrease.
- Ee) No change
9090. Which of the following is incorrect:
- Aa) CHGs result mainly from human burning of fossil fuels.
- Bb) Economic loss by climate change will affect the poorest nations the most.
- Cc) The greenhouse effect is when absorbed energy is re-emitted as thermal radiation, partially blocked by carbon dioxide.
- Dd) Over the next century, the temperature is expected to rise 2.5 °C to 6 °C.
- Ee) In the next 100 years, the energy/GDP is expected to fall.
91Which of the following is incorrect about PEO (Professional Engineers Ontario)?
- Aa) Protects engineers.
- Bb) Responsible for public safety.
- Cc) Enforcement body in Ontario.
- Dd) Enforces standards of competence.
- Ee) All of the above is correct.
9292. Which of the following is an objective of the code of ethics?
- Aa) Express shared assumptions and organisational values.
- Bb) Promote professionalism and excellence.
- Cc) Provide a statement on public accountability.
- Dd) Provide direction to staff and students around expected conduct.
- Ee) All of the above are true.
9393. In order to obtain a license, a set of requirements has to be met. All of the following are requirements for obtaining a license except:
- Aa) Pass the professional practice exam.
- Bb) Be at least 20 years old.
- Cc) Graduate with a degree from an accredited program.
- Dd) Review of work experience by the association.
- Ee) All of the above are true.
9494. Identify the correct statement:
- Aa) To receive a certificate of authorisation, an individual must have four years of licensed practice.
- Bb) Always become overconfident in order to make sure the job is done.
- Cc) Always work within your competence.
- Dd) Chapters are local branches of CCPE (Canadian council of professional engineers).
- Ee) P.Eng.O is a title assigned to all professional engineers.
9595. Which of the following names are not defined correctly:
- Aa) OSPE (Ontario society of professional engineers)
- Bb) SMP (Society membership program).
- Cc) ESSCO (Engineering student societies council of Ontario).
- Dd) PEO (Professional engineers Ontario).
- Ee) All of the above are defined correctly
96All of the following are duties of workers except:
- Aa) Report any defects in equipments.
- Bb) Bypass any safety device in order to fix a problem.
- Cc) Report any contraventions or hazards
- Dd) Do not operate equipments that endanger the safety of any worker.
- Ee) Work in compliance with the provisions of this Act and regulations.
9797. Identify the incorrect statement:
- Aa) OHSA refers to the employer and not the person.
- Bb) A reason for failure and disasters in engineering is wrong decisions taken.
- Cc) None destructive evaluation is used to analyze and identify failure modes.
- Dd) Ensure OHSA provisions are followed is a duty of the employer.
- Ee) All of the above is correct.
9898. Which of the following is a reason for major disasters in engineering?
- Aa) Lack of appreciation.
- Bb) Failure to recognize deteriorating safety situations.
- Cc) Dominating production imperatives.
- Dd) Failure to define responsibilities clearly.
- Ee) All of the above is correct.
991. Material safety data sheet provide information about:
- Aa) Hazardous equipment.
- Bb) Protective equipment.
- Cc) Hazardous substances.
- Dd) Workplace equipment and substances.
- Ee) None of the above is true.
100100. The practice of professional engineering requires:
- Aa) License.
- Bb) Certificate of authorization.
- Cc) 42 months experience.
- Dd) Bachelor degree.
- Ee) All of the above is required.
101101. All of the following are types of questions an engineer would have to think of except:
- Aa) Is being manufactured sustainable enough?
- Bb) All energy should be spent on producing products that serve needs rather than wants?
- Cc) Should we push for sustainable features in products?
- Dd) Is the economy willing to sacrifice?
- Ee) All of the above are questions an engineer needs to think of.
102102. How much Renewable energy reduced total energy?
- Aa) 10 %
- Bb) 13 %
- Cc) 15 %
- Dd) 11 %
- Ee) 16 %
103103. Which of the following is not a traditional company operation:
- Aa) Open cycle.
- Bb) Attack waste.
- Cc) Attack emissions.
- Dd) Good transportation.
- Ee) All of the above is a traditional company operation.
104104. What is CPR?
- Aa) Control pastures resources.
- Bb) Common procedure rules.
- Cc) Common pool resources.
- Dd) Community planned renewal.
- Ee) None of the above.
105105. In general, which of the following is incorrect:
- Aa) The individual incremental benefit > individual incremental hardship.
- Bb) The individual incremental benefit < individual incremental hardship.
- Cc) The group incremental benefit < the group incremental hardship.
- Dd) The group incremental benefit = the group incremental hardship.
- Ee) The group incremental benefit > the group incremental hardship.
106106. Which of the following is not a negative externality?
- Aa) Polluting by using coal since it is cheap, while other countries try to reduce it since it may lead to global warming.
- Bb) Fishing excessively for own profit, and not taking in consideration for fish to remain next year.
- Cc) Depleting some resources for a company for your own use.
- Dd) Building a new lane on the road to reduce jammed traffic.
- Ee) All of the above is a negative externality.
107107. All of the following define the Tragedy of Commons correctly except:
- Aa) Was published in 1968.
- Bb) A dilemma arising from a situation where people deplete resources for their own self-interest.
- Cc) As demand overwhelms supply, every individual consuming an additional unit harms others who cannot enjoy this benefit.
- Dd) Negligence of the well-being of the society due to personal gain preference.
- Ee) All of the above is correct.
108108. On average, from the early 1900’s till later 1900’s, what happened to the difference in temperature under climate change?
- Aa) Increase.
- Bb) Decrease.
- Cc) Increase then decrease.
- Dd) Decrease then increase.
- Ee) Stay the same.
109109. All of the following define the greenhouse effect correctly except:
- Aa) Incoming solar radiation is radiated out to space.
- Bb) Some radiation is absorbed in the atmosphere by greenhouse gases.
- Cc) Ultra-violet radiation from the surface.
- Dd) Methane is a greenhouse gas.
- Ee) All of the above is correct.
110110. Which of the following factors determine CO2 emissions?
- Aa) Population.
- Bb) Energy/GDP.
- Cc) CHG/Energy.
- Dd) Wealth per capita.
- Ee) All of the above are correct.
111111. On average, what would happen to energy intensity in the next century?
- Aa) Increase.
- Bb) Increase then decrease.
- Cc) Decrease.
- Dd) Decrease then increase.
- Ee) Stay the same.
112112. If a sustained decline in Carbon intensity by 2.5 % occurs in the next 40 years, what is expected to happen to GDP?
- Aa) Decrease by less then 2.5 %.
- Bb) Decrease by more than 2.5 %.
- Cc) Increase by less than 2.5 %.
- Dd) Increase by more than 2.5 %.
- Ee) Stay the same.
113113. Which of the following is not a greenhouse gas?
- Aa) Methane.
- Bb) Carbon dioxide.
- Cc) Nitrous oxide.
- Dd) Water vapour.
- Ee) Sulfur Vapour.
114114. What is the largest reservoir of carbon?
- Aa) Ocean.
- Bb) Soil.
- Cc) Atmosphere.
- Dd) Sedimentary rocks.
- Ee) None of the above.
115115. What human activity has added the most carbon to the atmosphere?
- Aa) Cutting down the rain forests.
- Bb) Increase soil erosion.
- Cc) Mining fossil fuels.
- Dd) Burning fossil fuels
- Ee) All of the above.
116116. By midst 21st century, by how much do rich countries need to cut down greenhouse gases?
- Aa) 50 %
- Bb) 30 %
- Cc) 10 %
- Dd) 20 %
- Ee) 40 %
117117. For fossil fuels, what fraction of energy is lost as heat?
- Aa) 1/2 energy.
- Bb) 1/4 energy.
- Cc) 1/8 energy.
- Dd) 1/6 energy.
- Ee) 1/3 energy.
118118. How much energy is needed to capture their own emissions in carbon capture and storage plants?
- Aa) 10 – 20 %
- Bb) 30 – 40 %
- Cc) 50 – 60 %
- Dd) 12.5 – 22.5 %
- Ee) 15 – 30 %
119119. Which of the following is not inside a cell phone?
- Aa) Antenna.
- Bb) Diode.
- Cc) Microphone.
- Dd) Transistor.
- Ee) All of the above are inside a cell phone.
120120. Which of the following is a major method of waste management?
- Aa) Recycling.
- Bb) Sewage treatment.
- Cc) Landfill.
- Dd) Combustion.
- Ee) All of the above are methods of waste management.
Information
- Description
- Engineering Quiz on ECOR 1010, created by Shaun Wardle on 05/12/2018.
- Author
- Shaun Wardle
- Language
- English
- Views
- 10
- History
- Created on 5 Dec 2018 · updated on 6 Dec 2018
- Tags
- Rating
- No ratings yet Rate this quiz