Karteikarten
Manipulating Genomes

Karten in diesem Stapel (47)
- 1What is a genome?all of the genetic material of an organism
- 2What is DNA profiling?producing an image of the non-coding DNA of an individual
- 3What are the five main stages of producing a DNA profile?DNA is extracted, digested, DNA fragments separated, hybridisation then product is analysed
- 4How is a DNA sample digested?The strands are split into fragments using restriction endonucleases. These cut DNA at specific restriction sites.
- 5How are DNA fragments separated?Using electrophoresis - this utilises the way charged particles move through a gel medium under the influence of an electric current.
- 6What is hybridisation?Radioactive or fluorescent DNA probes are added to DNA fragments. DNA probes are short DNA or RNA sequences complementary to a known DNA sequence. They bind to complementary strands of DNA under particular conditions of pH and temperature.
- 7How is electrophoresis carried out?1) DNA fragments are put into wells in agarose gel, which contain a buffer solution. DNA fragments of a known length are also added to provide a reference for fragment sizing.
2) An electric current is passed through, which causes the negatively charged DNA fragments to move towards the anode on the other side of the plate.
3) Smaller fragments move faster than larger fragments, which causes them to separate out across the plate.
4) When the first fragments begin to reach the end of the gel, the electric current is switched off. - 8How is PCR carried out?1) The temperature in the PCR machine is increased to 90-95degrees for 30 seconds. This denatures the DNA by breaking the hydrogen bonds between the DNA strands, causing them to seperate
2) The temperature is decreased to 55-60degrees and primers anneal to the ends of DNA strands. This allows replication to start.
3) The temperature is increased to 72degrees for a minute to provide the optimum temperature for DNA polymerase to work. The DNA polymerase builds the complementary chains to the DNA strands using free nucleotides, producing double stranded DNA. - 9What are palindromic sequences?Sequences of nucleotides that have antiparallel base pairs (base pairs that read the same in opposite directions)
- 10How do restriction enzymes work?They recognise specific palindromic sequences (recognition sequences) and cut (digest) the DNA at these points. The shape of the recognition sequence is complementary to the enzymes active site.
- 11What types of reaction takes place when restriction enzymes cut DNA fragments?Hydrolysis
- 12What are sticky ends?Small tails of unpaired bases at each end of a DNA fragment that allows it to bind to another DNA fragment with sticky ends with a complementary sequence.
- 13What is preimplantation genetic haplotyping?The screening of embryos from IVF to check for genetic disorders before they're implanted. The faulty regions of parents DNA are used to produce DNA profiles and are compared to the DNA profile of the embryo.
- 14What are transformed organisms?Organisms that have had their DNA altered by genetic engineering
- 15What is recombinant DNA?DNA formed by joining together DNA from different sources
- 16What is a transgenic organism?An organism that has been genetically engineered to include a gene from different species
- 17What are the three main stages of genetic engineering in bacteria?DNA fragment with required gene extracted, DNA fragment inserted into a vector, vector transfers DNA into bacterial DNA
- 18What vectors can be used in genetic engineering?Plasmids or bacteriophages
- 19How are isolated DNA fragments inserted into a vector?The vector DNA is cut open using the same restriction enzyme used to isolate the DNA fragment. Sticky ends complementary to the sticky ends on the DNA fragment form and the vector DNA and DNA fragment join together. DNA ligase joins up the sugar-phosphate backbones (ligation). This forms the recombiant DNA.
- 20Describe how electroporation is carried outA suspension of bacterial cells is mixed with the plasmid vector and placed in a machine called an electroporator. This creates an electrical field in the mixture which increases the permeability of the bacterial cell membranes and allows them to take in the plasmids.
- 21How does a bacteriophage vector transfer its DNA into bacterial cells?It injects its DNA into the cell (infects) and the DNA integrates into the bacterial DNA.
- 22How have soybeans been genetically engineered to make them resistant to pests?A gene found in the bacteria Bacillus thuringiensis (Bt) that codes for a protein that is toxic to some pests is isolated using restriction enzymes. The gene is then inserted into a plasmid vector taken from the bacteria Agrobacterium tumefaciens. This is then inserted into soybean plant cells' DNA.
- 23What are the advantages and disadvantages of genetically modified plants?Advantages:
Reduces amount of chemical pesticides
Disadvantages:
May encourage monoculture - only one type of crop planted, which reduces biodiversity making them more susceptible to disease - 24What is hereditary antithrombin deficiency?A disorder that makes blood clots more likely to form in the body.
- 25How is pharming used to treat people with hereditary antithrombin deficiency?The risk of developing blood clots is reduced by taking the protein antithrombin. This protein is produced by genetically modifying goats.
DNA fragments that code for the protein are injected into a goat embryo, which is then implanted into a female goat. The offspring produces the protein in their milk, which is extracted and given to patients. - 26What are the advantages and disadvantages of pharming?Advantages:
Drugs can be made in large quantities, making them more available
Disadvantages:
Could cause harmful side-effects for the animal - 27How has the poliovirus been found to be a possible treatment for cancer?Scientists found that some tumour cells have receptors on their membranes for the poliovirus - so the poliovirus will recognise and attack them. So by genetically engineering the virus to inactivate the genes that cause poliomyelitis (disease caused by the virus), it can then be used to treat cancer.
- 28What are the advantages and disadvantages of genetically engineering pathogens?Advantages:
Reduces suffering from incurable diseases
Disadvantages:
Scientists researching pathogens can become infected causing an outbreak, chance that GM pathogen can mutate and become harmful again, can be used for biowarfare not medicine - 29What is technology transfer?The sharing of knowledge, skills and technology so that beneficial genetically modified products can be created at a faster rate.
- 30What is gene therapy?Altering alleles to cure genetic disorders
- 31How would you go about curing genetic disorders caused by dominant alleles?Silence the dominant allele by inserting some DNA into the allele so it doesn't work anymore.
- 32How would you go about curing genetic disorders caused by recessive alleles?By adding a working dominant allele to counteract them
- 33What vectors can be used to insert altered alleles into cells?Altered viruses, plasmids, liposomes(spheres made of lipid)
- 34What are the two types of gene therapy?Somatic and germ line
- 35What is somatic cell gene therapy?Altering the alleles in somatic cells - temporary solution
- 36What is germ line cell gene therapy?Altering the alleles in sex cells, meaning offspring will not inherit the disease
- 37What are the advantages of gene therapy?- Prolongs the lives of people with genetic disorders
- Gives people with genetic disorders better quality of life
- Germ line therapy prevents the disease being passed on to offspring
- Decreases amount of people with the disease with germ line therapy - 38What are the disadvantages of gene therapy?- Technology can be mistreated eg. to prevent ageing
- Expensive
- Effects of somatic cell therapy short lived
- Chance of body rejecting vectors
- Allele could be inserted into wrong place on DNA causing problems
- Inserted allele could be overexpressed, producing too much protein - 39How is the chain-termination method carried out?1) Four mixtures are prepared by adding a single stranded DNA template, DNA primer, DNA polymerase, free nucleotides and a fluorescently labelled modified nucleotide (a different one added to each tube - A*,T*,C*,G*) to each tube. The modified nucleotides stop the addition of more bases to the sequences they add to.
2) PCR takes place in the mixtures, forming strands of different lengths as the modified nucleotides terminate the strands at different points.
3) The fragments are separated by electrophoresis and visualised under fluorescent light. The complementary base sequence can be read by reading the bands from the bottom to the top.
- 40How are gene sequencing techniques used to sequence whole genomes?1) A genome has to be cut into smaller fragments as the technique only works on fragments up to 750bp long. It's first cut into fragments about 100000bp using restriction enzymes.
2) The fragments are inserted into bacterial artificial chromosomes (BACs) - man made plasmids. Each fragment is inserted into a different BAC.
3) The BACs are then inserted into bacterial cells.
4) The bacteria divide, creating colonies that all contain the DNA fragment.
5) DNA is extracted from each colony and cut up using restriction enzymes then sequenced using the chain termination method. This puts the pieces back together.
6) The DNA fragments from all the BACs are put back together by computers to complete the entire genome. - 41Describe how pyrosequencing is carried outA section of DNA is cut into fragments, split into single strands and then a strand from each fragment is attached to a small bead. PCR is used to amplify the DNA fragments on each bead, then each bead is put into a separate well. Free nucleotides then attach to the DNA strands. The wells also contain specific enzymes which cause light to be emitted when bases are added to the DNA. Computers analyse the frequencies of the light emitted and interpret the DNA sequence.
- 42What is high-throughput sequencing?Techniques that can sequence a lot faster than original methods at a fraction of the cost eg. pyrosequencing
- 43What is synthetic biology?The design and construction of novel biological pathways, organisms or devices, or the redesign of existing natural biological systems
- 44What are the four techniques involved in synthetic biology?Genetic engineering, use of biological systems or parts of biological systems in industry, the synthesis of new genes to replace faulty genes, the synthesis of an entire new organism.
- 45What is computational biology?Using computers to study biology
- 46What is bioinformatics?Developing and using computer software that can analyse, organise and store biological data.
- 47What is electrofusion?A way of producing GM cells - small electric currents are applied to the membranes of two different cells. This fuses the nuclear membranes together to form a polyploid cell, containing DNA from both.
Informationen
- Beschreibung
- AS - Level AS Biology Karteikarten am Manipulating Genomes, erstellt von Kayla Price am 31/05/2017.
- Erstellt von
- Kayla Price
- Aufrufe
- 10
- Bewertung