Notes
Electricity notes
Content of the notes (1)
Page 1
Circuit symbols:
Batteries and cells:
A battery is made up from joining multiple cells together.
Static Electricity:
Electrons don't move through the material.
if you rub the material the electrons fall off
the material has a positive charge
It is attracted to the electrons on the outside on any other material
Current electricity:
Caused by the movement of electrons through a material
Electrical current is measured using an ammeter
Current:
Current is measured of how much electric charge flows through a circuit
the more charge that flows, the bigger the current
current is measured in units called amps
Energy Transfer:
Voltage:
Voltage is a measure of the difference in electrical energy between two parts of a circuit. The greater the difference, the greater the voltage. It is measured in volts. Symbol = V. 230V is bigger than 12V
The more cells the bigger the voltage
Electrical resistance:
How difficult it is for electrons to move through an objrct
measured in Ohm's
Conductors have a low resistance
Insulators have a high resistance.
Ohm's Law:
R=V/I
If graphed, it gives a linear rule'
The electric
Series an Parallel circuits:
If there are no branches it is a series circuit
if there are branches, it is a parallel circuit
Series Circuit:
If you put more lamps, the dimmer it will be
If a lamp breaks, the circuit is broken, and all components stop working
It's useful as a warning if one component in the circuit has failed.
It uses less wiring
Parallel circuit:
If a lamp breaks, the components on the other branches keep working.
The lamps stay bright if you add more lamps
They are useful if you want everything to work, even if one component fails
are homes are wired up with parallel circuits.
Direct and Alternating Currents:
Direct Current (DC):
The electric current supplied by a cell or a battery
It flows in one direction only
Alternating Current (AC):
The electric current provided by your home by power stations
It changes direction about 100 times every second
Electricity in the home:
Houses use AC because it is easier and cheaper to generate.
It is also cheaper and easier to distribute widely over large distances in Australia
In Australia, electricity, is generally supplied to homes in 240 V
Most electrical devices, aren't designed to use 240 V (computer printers, requires 9-12 V)
A transformer, usually attached to the lead, is plugged into the power point
The transformer reduces the voltage from 240 V to the 9 or 12 V required
Electrical safety:
A 240 V AC house hold power supply can kill
power points have 3 sockets, AC flows between the two top sockets through the appliance
The third socket, is called the earth socket, it is connected to the ground
Fuses and safety switches
Fuse: a thin wire that melts of the current becomes too strong
The fuse disappears, and the current is broken
they work to slowly to stop people from getting an electric shock
Information
- Description
- 9 Science Note on Electricity notes, created by doron9adler on 17/11/2015.
- Created by
- doron9adler · Nov 2015
- Updated
- Feb 19, 2016
- Views
- 1
- Rating