Flashcards
Core Competency 01
Cards in this deck (13)
- 1You want to set up a dual-boot scenario between Windows 7 and Windows Server 2008. How would you do this?Step 1. Partition hard drive
Step 2. Install Windows 7 first
Step 3. Then install Windows Server 2008 in the second partitions - 2What do you call the computer software which you configure before installing the OS?BIOS
- 3What would you advise to a client who wants to improve the computer’s built-in video card?Buy an internal video card having higher memory capacity
- 4What type of screw driver will you use for small screws usually found in Compaq and Apple computers?Torx Screwdriver
- 5How will you check and what instrument will you use to determine whether the power supply is providing enough voltage output or not?Voltmeter. Measure the output voltage of the power supply using appropriate setting on the voltmeter.
- 6What will you do if a customer wants to Install an operating system in his PC but does not have an optical drive?Create a bootable flash disk/flash drive
- 7What may be the problem if a computer does not recognize a bootable flash drive? What would you do to resolve this?Maybe the BIOS is not properly configured to boot on the flash drive. Configure the BIOS to boot on the flash drive
- 8What will you do if after installing both the IDE hard drive and optical drive you have noticed that only one drive is working?Check the Jumper Setting
- 9If after assembling a brand new computer the monitor does not display any image or character, what may be the possible causes?Check power on switch, check monitor cable
- 10What you should do after installing peripheral devices such as sound card?Install driver
- 11What should you configure in the BIOS when you are going to install an operating system using optical media?Boot Sequence
- 12What should you do if suddenly there is a lightning storm that occurs while assembling a computer?Power off the computer and unplug it from the outlet.
- 13What should you do if accidentally, water spilled on the computer which you are currently using?Power off the unit immediately, wipe with dry cloth the external parts and blow dry to ensure that internal portions are completely dry before turning the power on.
Information
- Description
- Computer Systems Servicing
- Created by
- Macky Paul Amores · Nov 2019
- Updated
- Nov 11, 2019
- Views
- 1
- Rating