Cloning and Biotechnology
Diapositivas del conjunto (17)
-
- Clone: genetically identical organisms or cells.
- Advantages of natural cloning:
- Cloning is rapid meaning the population increases rapidly.
- Reproduction can be carried out even if there is only one parent and sexual reproduction is not possible.
- Disadvantages:
- Offspring may become overcrowded.
- No genetic diversity
- Little variation
- Selection isn't possible.
- Natural cloning methods are used by farmers to increase their numbers of crops.
-
- This is a method of natural plant cloning. This is the method of reproduction through vegetative parts of the plant, rather than through specialised reproductive structures.
- Runners, stolons, rhizomes and suckers
- Many plants grow horizontal stems that can form roots at certain points. These stems are called runners or stolons if they grow on the surface of the ground and rhizomes if they are underground. Suckers are new stems which grow at the roots of a plant.
- Bulbs
- They consist of an underground stem which grow a series of fleshy leaf bases. There is also an apical bud which will grow into a new plant in the spring. They often contain more than one apical bud.
- Corms
- Like a bulb but solid. It is an underground stem with scaly leaves and buds. They remain in the ground over winter. In the spring they produce one or more new plants.
- Leaves
- Clones can grow on the leaf margins. The immature plants drop off the leaf and take root.
- Tubers
- Another type of underground stem. E.g. a potato. One potato grows one or more plants. Each new plant can then produce many new tubers.
-
- Cloning is not often seen in animals naturally.
- Mammals clone when identical twins form.
- Twins form when a zygote divides as normal but ht two daughter cells then split to become two separate cells. Each cell grows and develops into a new individual.
- The water flea and greenfly are common examples of organisms which produce asexually.
-
- Tissue culture
- This is micropropagation
- Used when: plants don't readily produce seeds, they don't respond well to natural cloning, they are very rare and needs to be pathogen free.
- Suitable plant material is selected and cut into pieces. These are called explants. Meristems are typically used which are always virus free.
- The sample is then sterilised in dilute bleach or alcohol. Also sodium dichloroisocyanitrate is a sterilising agent - typically associated with water sterilising tablets.
- The explants are then placed in a sterile growth medium. This is either shoot growth medium or root growth medium.
- Once a callus has formed it is divided to produce ;larger number of small clumps of differentiated cells.
- Once tiny platelets have formed they are transferred to a greenhouse to grow in compost.
- Cutting
- Short sections of stems are taken and planted directly in the ground or in pots.
- Rooting hormone is often applied to encourage root growth.
- It's much quicker than seeds.
- Grafting
- Joining structures from two or more plants together.
- A twig section from one plant is joined to the shoot of another.
-
Advantages and disadvantages of A.P.
- Advantages:
- Plants are pathogen free.
- Increase yields.
- Large numbers of seedless plants.
- Disease resistant.
- Reduce costs as harvesting occurs at the same time.
- Disadvantages:
- Susceptible to same diseases.
- Expensive equipment.
- Susceptible to pests and climate change.
- Needs skilled workers.
- Explants vulnerable to moulds.
- Can lose large numbers in the process of tissue culture. E.g. non-sterile conditions.
-
- Artificial Twinning
- Artificially or naturally fertilise an embryo.
- Split the embryo
- The separate cells develop into identical embryos.
- These embryos are then placed into different surrogate mothers.
- Somatic Cell Nuclear Transfer (SCNT)
- Take a donor nucleus from a skin cell.
- Take an egg cell from a different adult female and remove the nucleus and discard it.
- Fuse the donor nucleus with the empty egg cell with electric shocks.
- The fused cell begins dividing normally.
- The embryo is placed in the uterus of a third cow.
- The embryo develops normally into a lamb.
-
- Advantages:
- AT increases production of new farm animals.
- AT allows selection of desirable characteristics.
- SCNT allows cloning of GM embryos increasing efficiency.
- SCNT can reproduce dead pets.
- SCNT can reproduce rare, endangered or extinct animals.
- Disadvantages:
- SCNT is inefficient
- Many cloned animals are malformed or don't reach them.
- Animals have shortened life spans.
-
- What is biotechnology?
- Any technological processes that make use of living things to manufacture useful products.
- Why use microorganisms?
- Rapid life cycles
- Reproduce asexually
- Simple, specific needs for growth.
- Can be grown using waste materials.
- No ethical issues.
- Simple gene expression.
- They have many metabolic pathways.
- Indirect Food Production
- Microorganisms have an indirect effect om food production. For example:
- Yeast - used in baking as it releases CO2 during aerobic respiration. Yeast works on flour. 'sugar' + oxygen --> CO2 + H2O.
- Yeast is used in brewing. The anaerobic respiration of yeast produces ethanol. This is the process of fermentation.
- Bacteria works on milk in cheese production. Bacteria feeds on milks lactose. You get the solid curd and the liquid whey.
- Bacteria anaerobically respire in yoghurt production. Bacteria creates ethanal or lactic acid. They create extracellular polymers, making the smoot, thick yogurt texture.
-
- Single cell protein can be made from fungi.
- Such as Fusarium venetatum.
- This fungus is used to make quorn.
- It is high in protein and low in fat.
- Pros
- Fast reproduction of protein.
- High protein, low in fat.
- Use waste to grow.
- Not weather dependent.
- No ethical issues regarding the microorganisms.
- Cons
- Some microorganisms release toxins.
- Have to be separated to make food.
- GM issues
- Need sterile conditions.
- Little natural flavours.
-
- Penicillin
- It is a secondary metabolite
- Produced by batch fermentation of Penicillium chrysogenum.
- It is only produced when the population has reached a certain size.
- Fermenter is run for 6-8 days.
- Culture is filtered to remove the cells.
- Antibiotic is precipitated as crystals by the addition of potassium compounds.
- The antibiotic may be modified by the action of other microorganisms or chemicals.
- . Insulin
- Insulin was previously extracted from animals which had been slaughtered. Problem was ethics and subject to animals being killed.
- Now human insulin is developed by modifying bacteria.
- Gene for human insulin was combined with a plasmid to act as a vector. This enables the gene to be inserted into the E.coli bacterium.
- High insulin quantities
- Low costs
- Continuous culture
- No ethics over MOs
- Bioremediation
- Use of microorganisms to clean the soil and underground water on polluted sites.
- They convert toxic substances into less harmful ones.
- Such as the use of Pseudomonas to break down crude oil.
- Solvents and pesticides are a common bioremediation.
- It involves stimulating the growth of suitable microbes that use the growth of suitable contaminants as a food source. Requirements:
- Water availability
- A suitable temperature
- Suitable pH.
- Pros
- Uses natural systems
- Less labour/equipment is required
- Treatment in situ
- Few waste products
- Less toxic products
-
- There are two main ways of growing microorganisms: batch and continuous fermentation.
- Continuous: Used in the production of primary metabolites. A primary metabolite is a substance produced in fermentation which is an essential part of the normal functioning of a microorganism.
- The products are continually released in the continuous bioreactor from the cells.
- The broth is topped up regularly with the nutrients required by the cells.
- Some broth is removed regularly to extract the product and remove cells from the broth otherwise the population becomes too dense.
- Keeps the microorganisms growing at a specific growth rate.
- Batch production
- Used in secondary metabolite production.
- When the cells are placed under stress such as high population density or limited nutrient availability.
- Secondary metabolites are mostly produced during the stationary phase of growth.
- The culture is set up with limited nutrients and time.
- The fermenter is emptied and the product can be extracted.
-
Effective culturing of microorganisms
- There are two types of growth mediums: broth and agar.
- Asepsis: removal of unwanted microorganisms to reduce contamination.
- Aseptic technique:
- Wash hands
- Disinfect working area
- Have a bunsen burning to sterilize the air.
- Flame the bottle before closing.
- Don't fully open the Petri dish lid.
- Pass equipment through a flame to sterilize.
- Growing microorganisms:
- 3 main steps
- 1. Sterilisation
- 2. Inoculation
- 3. Incubation
- Sterilisation
- Sterilise the medium in an autoclave. Kills of unwanted organisms. (121 degrees).
- When the medium is cool, pour it into a sterile petri dish.
- Keep lid on Petri dish.
- Flame the neck of the bottle of agar.
- 4 Inoculation techniques:
- Streaking: Transfer a drop of liquid medium onto the agar surface. The drop is spread by dragging the loop across the medium.
- Seeding: Sterile pipette used to transfer liquid medium to the agar surface
- Spreading: Sterile glass spreader used to spread a drop of medium over the agar.
- Small cotton swab used to collect microorganisms from a surface and wipe over the surface of the agar medium.
- Tape the sides of the Petri dish but don't seal - want to keep aerobic conditions.
-
- 25 degrees in school
- 40 degrees in industry
-
- All bioreactors will produce unused nutrients, products of other reactions and waste.
- Separating the useful products from the unused is done in downstream processing.
- Can be difficult and expensive.
-
- It is an enzyme which is held in place and not free to diffuse through solution. They are taken out of suspension so they don't mix freely with substrate.
- Pros
- Don't mix with substrate so extraction costs are lower.
- Less down stream processing
- Enzymes can be easily reused.
- Enzymes are surrounded by an immobilizing matrix preventing them from extreme conditions.
- Cons
- Reduced efficiency
- High initial cost of materials.
- Methods of production
- Adsorbtion: Enzyme molecules are bound to a supporting surface by hydrophilic interactions and ionic links. Bonds aren't that strong so the enzymes can often leak into the reaction mixture. Is adsorbtion to inorganic carriers.
- Covalent bonding: Bonded to supporting surface by strong covalent bonds. They are less likely to become detached and leak. They can be expensive and can distort the enzymes active site.
- Entrapment: Enzyme molecules are trapped in a matrix that doesn't allow free movement. They remain fully active.
- Membrane separation: Enzyme molecules are separated from the reaction mixture by a partially permeable membrane. Substrate and product must be small enough to pass through the membrane.
-
Industrial use of immobilised enzymes
- Glucose Isomerase - Used to produce fructose from glucose. Fructose is sweeter than other sugars so less has to be used in industry.
- Penicilin acylase - Used to make semi-synthetic penicillin as bacteria are still affected by them.
- Lactase - Used to produce lactose free milk. Hydrolyses lactose to glucose and galactose, giving lactose free milk.
- Aminoacylase - Used to produce pure samples of L-amino acids for pharmaceutical.
- Glucoamylase - Converts dextrin to glucose. Amylase breaks down starch into short polymers called dextrin.
- Nitrile hydratase - Plays a role in the plastics industry.
-
- Also called the sigmoid growth curve.
- 4 stages:
- Lag - The microorganisms are adjusting to the conditions and are synthesising new enzymes.
- Log - They are reproducing. The birth rate is higher than the death rate. The reproduction rate is high.
- Stationary phase - Birth rate = death rate. In a batch fermenter, secondary metabolites are produced here.
- Death - When all the resources are used, some die, some produce waste. Death rate higher than birth rate. There is less productivity.
Información
- Descripción
- A level (Chapter 22 - Cloning and Biotechnology) Biology Diapositivas sobre Cloning and Biotechnology, creado por Chloe Drewery el 10/12/2017.
- Creado por
- Chloe Drewery · dic 2017
- Actualizado
- 6 abr 2018
- Visitas
- 5
- Valoración