Flashcards
BIOL 354 Set 9-14
Cards in this deck (161)
- 1Name the 2 degree of response to toxicants and define themLethal - outcome is death
Subacute - level below death - 2What are the 3 types of responses to toxicants? Give 2 examples of each.Population - productivity, population density
Organism - growth, behavior
Biochemical - stress protein production, enzyme inhibition - 3What degrees is usual response in toxicology?Usually sublethal
- 4Name the 4 types of timing of response.Acute
Chronic
Subacute
Cumulative - 5For acute response, what’s the approximate time frame measured and what’s the [dose]?Short time frame (days), high dose
- 6For chronic response, what’s the approx. time frame measured and what’s the[dose]?Time frame > 10% of organism life; low dose
- 7What’s the difference between chronic and subacute response?Chronic = long term exposure at low toxicant conc.
Subacute = less severe dose than acute (maybe higher than chronic), longer time (but may be shorter than chronic) - 8What’s the difference between cumulative vs. acute response? (consider dose and timing)Cumulative = dosing done at successive addition & in diff ways
Chronic = low, static dosing over a long time - 9Name the 3 types of testing that can be done for toxicity. What is the most significant type of testing?Life cycle study
Critical life stage testing*
Early life stage testing - 10Why might life stage testing be more important than life cycle study? What might be the problem with this?Life stage testing can reveal toxicity at an important part of an organism's life; also more efficient to do.
Problem = not all organisms in nature are at the same life stage at the same time; may lead to overestimation of risk - 11What is one advantage of early life stage test?Younger animals easier to work with
- 12What are the two approaches that make up bioassay strategies? What’s more commonly usedDose-dependent or time-dependent
Dose is more commonly used - 13Describe how a static toxicity test work.Incubate organism with a set of given concentrations with static renewal over the test period to keep [toxicant] constant
- 14Why is a population needed for most toxicity testing?Toxicity is random; individuals may not be affected by the same dose at the same time or in the same way. Needs population for results to have statistical significance
- 15What is a bioassay and how might this be useful to toxicology?Experiment for estimating nature, constitution, potency of contaminant by examining the reaction of biological organism
- 16What is the difference between dose and concentration? Which one is measured?Dose = amount of toxicant that is internal to the organism
Concentration = amount of toxicant external or exposed to the organism; this is measured - 17Differentiate between LC50 AND EC50LC50 = [toxicant] that kills 50% of population tested
EC50 = [toxicant] that affects 50% of population tested wrt to the normal level of parameter measured (non-lethal endpoint) - 18Describe the relationship between MATC, NOEC, LOEC. What type of testing is required to determine this?Maximum Allowable Toxicant Conc.
No Observed Effect Conc.
Lowest Observed Effect Conc.
Need data on survival, growth & reproduction over organism life cycle. - 19What’s one advantage and one problem associated with semi-log dose-response curves?Adv: Obtain a linear range on graph
Disadv: cannot plot 0 concentration on the graph - 20What is an advantage and a problem associated with log-probit scale graph?X = log (conc.), Y = Response on probit
Adv. = get good confidence around EC50
Problem = error increases away from EC50 - 21Why is it useful to compare the slopes of different toxicants on dose-response curves?Can help to differentiate toxicant mechanism. I.e. Diff slope for 2 toxicants likely means diff MOA & vice versa
- 22What parameter is obtained out of time response curves? What is an advantage of this?LT50.
Can measure LT50 of diff. chemicals at one conc. to compare their toxciity. - 23What is incipient LC50 and how is it used?The asymptotic [toxicant] determined by plotting LC50 vs. time
Used to decide [toxicant] series to be tested for it to act & elicit an effect. - 24Briefly describe how lethal effects data may be used to control toxicity discharge. What is a drawback? Solution?Can be used to calculate LC5 to protect 95% of species
Drawback = not all chemicals in discharge tested, mixtures not tested, not all organisms are at the same sensitivity/life stage - 25What is the hormesis model? What kind of data can it not use? What is it most useful for? (2 points)Hormesis model = biphasic concentration response that account for the stimulatory effect of a toxicant. Cannot use lethality data because can only see drop. Useful for low conc. toxicant & chronic effects.
- 26What is the threshold model and what are 2 problems related to it?Common conc. response model.
Problem = doesn't account for stimulating effect of a toxicant; doesn't work for low conc. or chronic effect - 27Why should stimulating responses to contaminants be accounted for? Give an example to illustrate its importance.Stimulating responses can have adverse impact on organisms.
Ex. If examining P450 up-regulation, PAH at low conc. will have a stimulatory effect then drop; however, this up-regulation is negative. - 28Name 5 traits that should be considered when selecting for test organismEase of culture, sensitivity, widely available, known genetic history, known relative toxicity for various classes of toxicant (+ ctrl)
- 29What type of organism is Daphnia magna?Fresh water microcrustaecean (water flea)
- 30Explain how the Daphnia magna test work. What is measured as the endpoint, positive control, type of test and data obtained?Expose neonate to various [toxicant] in triplicates + negative ctrl in appropriate media; room light exposure, no static renewal, starvation, 48h test.
End point = lethality
+ Control = Cu
test = acute
data = LC50 - 31Name 3 advantages and disadvantages associated with Daphnia magna test.Adv: rapid, Daphnia sensitive to many contaminants, small volumes of chemical
Disadv: Starvation test = more stress; steep dose-response curve, sensitive to changes in water quality (fastidious) - 32Why is a starvation test done with Daphnia magna?Food may provide interference to examining effects of toxicant (i.e. a confounding variable)
- 33What type of organism is Lemna gibba?Duck weed, C3 monocot
Higher plant - 34Describe how the Lemna gibba test works. What is measured as the endpoint, positive control, type of test and data obtained?Expose colonies from log phase culture to growth light in growth medium; 8d test with static renewal.
+ control = atrazine, NaCl
test = growth inhibition
data = EC50; chronic test - 35Name 3 advantages and disadvantages associated with Lemna gibba test.Adv: small volumes of waste, inexpensive, can be used with bioindicator assessment
Disadv: lower than avg. sensitivity, labor intensive, sensitive to light quality - 36What type of organism is Hyalella azteca and what is it used to investigate?Freshwater amphipod; benthic organism
Used to investigate sediment contamination - 37Describe how the Hyalella azteca test works. What is measured as the endpoint, positive control, type of test and data obtained?Expose neonates to conc. series; 1-4wks + feeding, static renewal, room lighting
endpt = survival, growth, reproduction
+ control = Cu, Cd
test = survival (acute), growth & reproduction (chronic)
data = LC50 or EC50 - 38Name 3 advantages and disadvantages associated with Hyalella azteca test.Adv: inexpensive, sensitivity to contaminant, ease of culture
Disadv: labor intensive testing, difficult to see & to enumerate (sediment), large vol. of waste - 39What type of organism is Vibrio fischeri? What’s special about it?Marine bacteria
Emits luminescence - 40Describe how the Vibrio fischeri test works. What is measured as the endpoint, positive control, type of test and data obtained?Expose log phase culture to conc. series; use 1mL test. Incubate in dark for 30 min w/chemical then measure luminescence.
Endpoint = survival
+ control = antibiotic/metals
test = acute
data = LC50 - 41Name 3 advantages and disadvantages associated with Vibrio fischeri test.Adv = very small volumes, very short testing time, good as first-cut diagnostic
Disadv = not representative of higher organisms, insensitive to many contaminant, up-take limited due to nature of test - 42Why might the V. fischeri test be insensitive? What can be a possible solution?Insensitive because certain toxicants (e.g. organics) need time to elicit measurable effect. Can be fixed by extending test period to 18 hrs then measure fluorescence.
- 43What is the avian toxicity testing used to measure? How does acute oral toxicity work for this? What about sub-acute toxicity?Used to measure DDT (pesticides)
Acute oral = LD50 based on dosing with fasting then feeding
Sub-acute = LD50 base don dosing in younger birds with feeding - 44Describe how avian reproduction test works.Put toxicant in diet under light conditions, then continue to add chem and in conditions that promote breeding. Then measure production of viable eggs.
- 45What’s the 3 sub-type of avian toxicity testing? Which is the most important one and why?Acute oral toxicity, sub-acute oral toxicity, avian reproduction.
Reprod. most important - 46Why is EC10 collected for avian toxicity testing?Needed to determine the toxicity of chemical to several avian species & for protection for 90% of species.
- 47Name 5 biotic factors that affect test outcome and explain why.1. Test organism - variable response
2. Life stage - sensitivity related
3. Health/nutrition - additional stressor
4. Acclimation - may cause errors
5. Sex differences - relevant to endocrine disruptors; diff hormonal effect - 48Name 5 abiotic factors that affect test outcome and explain why.1. Temp - additional stress
2. O2 - radical production
3. pH - can affect toxcity for metals
4. light- can affect toxicity for organics
5. water hardness - important for metal uptake - 49List the 5 categories of negative effects and associated examples. Which one needs the least contaminant to generate an effect?Narcosis, biochemical toxicity, ROS, endocrine toxcity, genotoxicity*
- 50List the 2 types of positive effects associated with contaminants.1. Detoxification (degrade & excrete)
2. Acclimation - 51What are the 4 variables in toxicity mechanisms?1. Organism
2. Chemical
3. Conc/Dose
4. Modifying factors - 52Name the 3 variables that affect the negative impacts of metals.1. Dose-dependent
2. Metal-dependent (valency; metabolic)
3. Environment-dependent (organometallic, ionic env.) - 53Which metals are considered to be metabolic nutrients and trace nutrients?Metabolic: Cu, Ca, Zn
Trace: Se, Cu, Mn, Mg - 54Which metals are considered non-metabolic?Hg, Pb, Cd, Ni, Sn, Ag
- 55Which metals are toxic and prevalent in the environment?Pb, Cd, Ni, Cu, Zn
- 56Briefly, what are the differences between Class A vs. Class B metals?Class A = O seeking, bind O>N>S (ex. Ca, Al, Mg); affect nucleic acid, cell membrane
Class B = S/N seeking, bind S>N>O (ex. Zn, Cu); target AAs & enzymes - 57Name the 2 general broad functions of metals in metabolism and give 3 examples of each.1. Enzyme co-factors (ex. Fe for cytochromes, Mg for photosynthesis)
2. Enzyme structural components (ex. Zn for Zn fingers, Fe for Hb) - 58Name 3 biological impact disturbances in metal metabolic function can incur?1. Block ion channels
2. Displace essential enzyme cofactors
3. DNA damage by binding to nucleotides
(bonus: modify biomolecules) - 59Between Cu and Zn, which is more toxic? In general, in which environment are they most problematic?Cu more toxic.
Most problematic in aquatic environment. - 60What model explains acute toxicity that results from Cu and Zn?Biotic Ligand Model (i.e. competing with other ions for ion channels in biota)
- 61What’s the difference between Cu & Zn toxicity in soft vs. hard water?Cu & Zn are both more toxic in soft water. Hard water contains higher conc. of CaCO3 that compete with Cu & Zn for ion channels and thus decreases uptake into biota.
- 62Give 2 examples of how Cu causes acute toxicity1. Cu toxic to plants; affect PSII at high conc.; affect respiration in the same way because it redox cycles (RCM)
2. DNA binding disturbs base-pairing (BLM) - 63What mechanism do Cu and Zn act with when present in low concentrations?Reactive oxygen catalytic mechanism (RCM)
- 64Explain how reactive oxygen catalytic mechanism can generate extensive damage in bio. systems.RCM uses metals that are capable of redox cycling (e transfer) to generate oxygen species such as superoxide, hydrogen peroxide and hydroxyl radicals that can oxidize biological molecules.
- 65Illustrate how Cu generates ROS through participation of redox cycle.Excess Cu can receive e from QH2 from mito ETC then pass it on to oxygen to generate a series of ROS that go on to oxidize biological components.
- 66Differentiate between BLM and RCM wrt at which conc. it’s active, what it binds, type of effect on organism.BLM: active at high conc., binds ion channels/receptors, acute effect
RCM: active at low conc., catalytic production of ROS to cause systemic damage; chronic effect - 67What type of nutrient is Cd? How does it affect plants, mammals, model organisms, and humans?Non-metabolic
Plants = affect growth
Mammals = kidney failure
Daphnia & rainbow trout = impaired reproduction
Humans = fatal with inhalation - 68What type of nutrient is Pb? What forms does it exist? Based on this, which form most toxic with relation to uptake?Non-metabolic
Exist in inorganic & organometallic form
Organometallic most toxic (more lipophilic & increase bioavailability) - 69Explain 2 ways that Pb affects mammals after it enters the blood. Where is it initially accumulated?1. Associate with RBC & affect their life span (anemia)
2. Cross blood brain barrier & affect CNS (ex. learning disability, hyperactivity)
Initially accumulate in liver & kidney - 70What is the key enzyme and its biological function that Pb inhibits?Aminolevulinic acid dehydratase (ALAD); involved in heme biosynthesis
- 71Explain 2 ways how Pb exposure to humans historically occurs.Lead acetate
Lead piping - 72How does Pb reach plants, then affect them at low and high conc.?Usually via leeching in acidic soils.
Low conc. = slowed cell division at root tip
High conc. = impaired germination - 73What type of nutrient is Hg? How does it affect organisms in general? How does it affect animals (mammals) specifically (3 ways)?Non-metabolic
Neurological disorder across the board.
Animals = CNS effect, impaired reproduction, cross-link DNA strands to cause breaks - 74Describe how MeHg can enter the brain and associated toxic effects on CNS.MeHg associate with Cys in blood > similar to Met > cross blood-brain barrier > interferes with protein synthesis, neurotrasnmitter production and ionic channels in neurons
- 75Briefly describe a historical occurrence of Hg toxicity.In Japan, MeHg poisoning was developed in an entire town due to industrial discharge in the bay & Hg bioaccumulation in fish.
- 76Wrt to enzymatic activities, what are the positive responses of metal exposure (2 methods)?1. Up-regulation of metal transcription factors that induce expression of metallothioneins
2. Up-regulation of ROS scavening enzymes (superoxide dismutase, catalase, glutathione peroxidase) - 77What are metallothioeins (MTs) and the key traits that characterize them? What are their functions? How are they useful in toxicology?Small, cys-rich proteins capable of sequestering metals and scavenges ROS. Useful in toxicology because increased expression can be measured and used as an indicator of contaminant exposure.
- 78What does elevated metallothionein expression indicate?Indicates a way for organism to confer tolerance
- 79Describe the 3 types of radiation that can occur.Non-ionizing (ex. visible)
Ionizing (ex. X-ray)
Particles from radioactive nuclei (ex. alpha & beta) - 80What are alpha and beta particles (composition)?Alpha = P2N2 (He nucleus; larger)
Beta = P + N - 81How do alpha and beta particles, and gamma rays generate negative effects in an organism?They all penetrate matter, collide with e, resulting in excitation or ionization of absorbant that go on to break molecular bonds and cause dmg.
- 82What is the general pathway of radiation damage?Random process via collision of excited particles to biomolecule.
- 83Describe the 2 types of radiation damage when it enters the body.1. Excitation of molecule causes to transfer excess E to biomolecules to cause damage
2. Ionization - direct bond breakage or ejection of e to react with other molecules - 84Describe the 2 routes of radiation damage.1. Direct impact with molecule to cause damage
2. Indirect excitation and energy transfer - 85What is a gray and what is it used to measure?J/kg
Used to measure radiation dose - amt of radioactive decay E deposited in biological tissue - 86What is measured by dose equivalents and how is it calculated?Likelihood of causing biological damage.
Sv = QF x Gy - 87What is the radiation dose that will cause chronic effects (ex. tissue damage) vs. acute effects (blistering skin)?Chronic effects ( 1Gy) are lower than acute effects (3 Gy)
- 88What are the two types of radiation damage?1. Somatic
2. Genetic - 89What is affected with somatic radiation damage? What type of effect is this? (chronic vs. acute)Damages enzymes, cell membrane, proteins. Acute cytotoxicity; non-stochastic, threshold-based
- 90What does genetic damage affect? What type of effect is this? (chronic vs. acute)Causes DNA damage that result in mutations, carcinogenic, stochastic.
Chronic effect. - 91Illustrate the mechanism for radiolysis of water. Use this to explain how radiation causes systemic damage.H2O -> H2O+ + e
e + H2O -> H2O-
H2O- -->OH- + OH radical
OH radical is highly reactive and can cross-link lipids, oxidize proteins - 92How can radiolysis affect proteins? Give 2 examples (hint: think side chains).1. Cys side chain by forming disulfide bond with hydroxyl radical or form H2S with hydrogen radical
2. Lys side chain by forming ammonia + -OH with hydroxyl radical - 93Name 3 characteristics of PAHs.Lipophilic, unreactive, photoactive
- 94In general, are PAHs toxic on its own? Why or why not?No. PAH normally unreactive, don't biomagnify because they can be metabolized.
- 95Name 2 ways that PAHs are activated and the ultimate effect of this.1. Photochemical activation - photosensitization and photomodification
2. Biochemical activation - by P450 that hydroxylates PAH to form reactive epoxides - 96What are the 2 mechanisms associated with photoinduced toxicity of PAHs?1. Photosensitization - formation of singlet O2
2. Photomodification - oxidation from singlet excited state or triplet excited state - 97Name 3 phototoxic PAH compoundsAnthracene, benzo[a]pyrene, phenanthrene
- 98List the 2 key differences between photomodification and photosensitization1. Photomodification can be outside or inside to organism
2. Photosensitization can only be inside organism - 99Illustrate how a photooxidation product 1,2-dhATQ can affect cellular respiration.1,2-dhATQ inhibit electron transport to affect respiration and photosynthesis.
- 100How does anthroquinone cause damage in biological organisms?Via redox cycling to generate ROS species that oxidizes biomolecules.
- 101What is the resulting compound from PAH biochemical activation? What enzyme does this?oxyPAH
Cytochrome P450 and epoxide hydrolase - 102How does liver carcinogenesis occur in fish? Where does it frequently occur? What is the accepted bioindicator for this?Some PAHs oxidized in the liver can intercalate into DNA to cause mutations and lead to tumor formation.
Occur frequently in industrailized areas.
Accepted bioindicator = histopathology - 103What are 2 positive effects associated with PAH toxicity?1. Up-regulation of P450 enzymes
2. Up-regulation of ROS scavenging enzymes - 104Describe the characteristics related to PCBs. Which congener is the most toxic?Lipophilic, highly persistent, high molecular weight. Eclipsed congeners are most toxic (related to steric hindrance to be OHed)
- 105Why are PCBs difficult to metabolize? If not metabolized, what happens to it?Due to chlorination, there can be no adjacent H atoms on two Cs needed for P450 hydroxylation.
If not metabolized, will accumulate in organism. - 106Describe the endocrine effects of PCBs and the 2 reasons that cause them.1. Mimics hormones & bind biological receptors to cause dmg
2. P450 in PCB metabolism are shared with steroid hormone synthesis; chronic upregulation changes normal hormone lvl - 107How does porphyria cause photosensitization in organisms?Porphyria = elevated heme lvls in organism due to increased activity of aminolevulenic acid synthetase. More conjugated ring system lead to formation of triplet state & generation of singlet oxygen.
- 108Name some properties of dioxins and furans. Where are they found?Lipophilic, in mixtures, highly persistent
Found as contaminants in phenoxy herbicides. - 109Name 3 negative effects associated with dioxins. What makes them so toxic?1. Liver necrosis & hemorhraging
2. Immunosupressant
3. Teratogenic (DNA adducts)
Toxic bcs not susceptible to hydroxylation - 110How do dioxins actually form in terms of being a byproduct of wood pulp?Wood pulp has aromatic cmpds that gets chlorinated in the process of bleaching for paper manufacture.
- 111What are the major environmental problems related to pesticides?Negative effect on non-target organisms
- 112Give an example of an organochlorine insecticide. What are 3 negative impacts associated with this? Are they chronic or acute?DDT
Nerve poison via retarding Na+ channel closure; carcinogenic; endocrine disruption
Acute effect on target organism; chronic on non-target - 113Are organophosphates persistent? Why or why not?No. Contains atoms or functional groups that are needed by MOs for growth & metabolism (ex. P, N)
- 114Explain how parathion negatively impacts an organism.Nerve poison by inhibiting ACh esterase
- 115Give the target, persistence and toxicity of nicotine.target = aphid
persistence = low; degraded by light
toxicity = high (mammals) - 116Where is rotenoids found and what do they inhibit?Root extract
Inhibit electron transport - 117Where is pyrethrums found? What is its toxicity and mechanism?Chrysanthemum extract
Nerve poison for insects only - 118Give the herbicides related to permanent and temporary removal of vegetation, their uses and characteristics.Permenent = high dose, non-selective (atrazine)
Temporary = low dose, non-selective (glyphosate, paraquat) - 119What is an example of a selective herbicide? (hint: you did a lab on this)2,4-D
synthetic auxin that targets dicots - 120How do the traizine & ureas class of herbicides kill plants? Give 2 examples that belong to this class.Kill by inhibiting PSII (bind PQ site)
Atrazine, DCMU - 121Why is corn tolerant to atrazine?Enzyme in corn can hydroxylate at Cl to metabolize it
- 122Describe the mechanism and outcomes of atrazine. What is the ultimate cause of plant death?Atrazine binds at PQ site in PSII to inhibit e transfer. Lead to photoinhibition, plants bleach.
- 123Briefly, what is the mode of action for methyl viologens?Act as terminal e acceptor of PSI to generate superoxide anion.
- 124Why do methyl viologens pose risks to animals?Can also accept e in mito ETC to generate ROS & cause dmg.
- 125Compare the mechanism of atrazine and methy viologens in terms of differences of ROS production.Major diff = Atrazine bind PSII, MV act as e acceptor for PSI. Ultimately both lead to plant bleaching due to free radicals generation.
- 126Describe the mechanism with which glyphosate kills plants. Why might glyphosate be an ideal herbicide?Glyphosate inhibits an enzyme in aromatic aa synthesis in plants. Because animals don't make aas, it's nontoxic to non-plant species. It's also rapidly degraded in soil (has Ps, Ns, COOH groups)
- 127Use a diagram to illustrate the synergistic toxicity of metals and PAHs.1,2 dhATQ can bind to complex III in mito ETC to intercept QH2 e transfer. Meanwhile, Cu redox cycles by taking e from accumluated QH2 to generate hydroxyl radicals.
- 128How might temp. and UV increase the toxicity of PAHs?UV = photochemical activation of PAHs
Temp = increase stress on organism in addition to presence of toxicant metabolism - 129How do biomarkers differ from bioindicators? (exam)Biomarkers = biological response to an env. chemical at an individual organism level that deviate from normal level
Bioindicator = biological response at higher organizational levels such as population, community, ecosystem - 130Name several parameters included under the biomarkers umbrella.Molecular, biochemical, physiological, histological, behavioral, morphological
- 131Differentiate between biomarkers of effect vs. biomarkers of exposureBiomarker of effect shows the real impact of toxicant on organism; the other indicate exposure to a toxicant but gives no info about adverse effects
- 132Give one example for biomarkers at receptor binding, molecular, physiological change and individual organizational levels.Receptor binding: PCB binding to Ah receptor
Molecular: induction of P450
Physiological: tumor formation
Indvidual: growth/behavior change - 133For the graph that illustrates organism health status vs. concentration, where does biomarker fit in on the line?Biomarker of exposure = homeostasis, acclimation
Biomarker of effect = reversible/irrevers. dmg; death - 134Give 4 examples of biomarkers, the contaminants they measure and relevant comments.1. ALAD inhibition, Pb, measure effect
2. P450 expressed, organic contaminant, measure exposure
3. Stress proteins, metals and organic contaminant, measure exposure & non specific
4. DNA dmg, PAH/PCB, measure of impact - 135What is an example of stress protein and what do they do? What contaminant does this biomarker measure?Heat shock proteins, target protein for degradation
Measure nonspecific exposure to OC and metals - 136What are some advantages related to using biomarkers?Don't need to know history of contaminant site
Link biomarker to whole organism toxicity
Response occurs at lower conc. than whole organism assay - 137What are the general requirements for biomarker assays to work?Need to know mechanistic basis of biomarker; need to be easy to measure relative to whole organism assay
- 138Name the for biomarker assays examined.ALAD assay, EROD assay, photosynthesis (chl fluorescence), gene expression
- 139What is used for the ALAD assay? How is it executed?Measures inhibition of aminolevulinic acid dehydratase. Expose animals or collect from field, isolate blood from organism & assay enzyme activity in blood
- 140What are adv and disadv of ALAD assay?Adv: More sensitive than chemical analysis; Measures impact
Disadv: only useful for Pb - 141What is used for the EROD assay and what contaminant does it measure?Uses ethoxy-resorufin-o-de-ethylase activity to measure P450 1A1 induction. Measures exposure to PAH, PCB and dioxins.
- 142Briefly describe how to execute an EROD assay.Expose organism to contaminant; take cells or isolate liver, homogenize tissue, add ethoxy-resorufin & incubate for 30 min, then measure increase in fluorescence.
Fluorescence = P450 1A1 induction. - 143Name the advantage and limitation of EROD assay.Adv: rapid, sensitive and response directly indicate biochemical response in organism
Disadv: only indicates exposure to toxicant instead of impact. - 144What are the 3 assays done if using photosynthesis as a biomarker?CO2 fixation
O2 evolution
Chl fluorescence - 145What are 3 advantages and disadvantages related to using photosynthesis as a biomarker?Adv: reflective of whole plant physiology, measures impact, detects many classes of toxicants
Disadv: expensive equipment, complex response, not anymore sensitive than just growth - 146How does chl a fluorescence connect to the state of plant physiology?Excited chlorophyll dissipates the absorbed light energy by driving photosynthesis, then emitting fluorescence as radiation. For this reason, fluorescence emission is associated with proper electron transport in the PS.
- 147Should a functional PS have low or high chl a fluorescence? Why?Low.
Normally E is harvested for e transport in photosys. If this is high, indicates a blockage in e transport. If there is a delay in fluorescence, also indicate inhibition. - 148How do gene expression assays work? What are 3 advantages ?Obtain sample DNA then do northern blotting, PCR, microarrays.
Adv = rapid, sensitive, molecular fingerprint of contaminant, reveals mechanism - 149Name 2 ways that a biomarker can be validated (4 total).1. Kinetics of biomarker should match response time frame of whole organism
2. Should be able to detect similar biomarkers of known exposed organisms in field (not lab artifact) - 150Name 6 types of soil contaminants and their sources (one is good).1. PAH - combustion of organics
2. chlorinated organics- historical
3. PHC - petroleum industry
4. Salt - oil refinery
5. pesticides - agriculture
6. metals - landfill - 151Give 6 examples of soil remediation methods. Which ones are preferred?1. Soil incineration
2. Landfarming
3. Electrokinetic separation
4. Chemical extraction
5. Bioremediation
6. Phytoremediation
Bio methods preferred - 152Why is landfill disposal not considered a remediation method?Just moving contaminated soil from one site to another without trying to break down the contaminants
- 153What are the problems associated with soil incineration method?Combustion generates PAHs, also destroys the soil + nutrients it contains
- 154What is a limitation of the chemical extraction method?Only works for organics, hard to scale up
- 155What is the major problem related to soil flushing?Groundwater contamination
- 156How does landfarming work?Ploughing & aerating the soil to release volatile organics
- 157Define phytoremediation. What are some advantages and drawbacks related to it?Using plants to remove contaminants from water, soil and air.
Adv = inexpensive, allow remediation of remote areas, allow remediation of soil structure, plants provide biomass for rapid bioremediation & promote rhizosphere activity - 158What is a rhizosphere and why is it important for phytoremediation?Rhizosphere = area in the soil around plant roots
Important because microbes associate with plant roots and there is high biological activity that help break down soil contaminants - 159What is PGPR and what are their functions? (4 functions)Plant growth promoting rhizobacteria
Remove plant stress hormone ethylene; produce siderophores that help plant sequester iron; solubilize P for plant; produce plant-like auxins to promote growth - 160Roughly illustrate the role of IAA and ACC in the synergistic relationship between bacteria and plant.IAA: plant-like auxins produced by PGPR & delivered to plants to promote growth
ACC: precursor to ethylene stress hormone; taken up by the bacteria as N source - 161How does phytoremediation encourage the biodegradation of petroleum HC by specialized MOs? (think about bioavailability).In rhizosphere, plants help mobilize & increase bioavailability of petroleum HC. This enables PHC-degrading bacteria to have access & metabolize HC as C source.
Information
- Description
- Biology Flashcards on BIOL 354 Set 9-14, created by Flora Dong on 19/12/2017.
- Created by
- Flora Dong
- Views
- 63
- Rating